과제정보
이 연구는 한국연구재단의 광화유체 진화의 미시적 해석: 마그마성-열수 광화작용의 새로운 이해 사업의 (NRF-2018R1D1A1B07051418)의 일환으로 수행되었음을 밝힙니다.
참고문헌
- Acton, G.D., Okada, M., Clement, B.M., Lund, S.P. and Williams, T. (2002) Paleomagnetic overprints in ocean sediment cores and their relationship to shear deformation caused by piston coring. J. Geophys. Res. Solid Earth, v.107(B4), p.EPM-3. doi: 10.1029/2001JB000518
- Arbaret, L., Mancktelow, N.S. and Burg, J.P. (2001) Effect of shape and orientation on rigid particle rotation and matrix deformation in simple shear flow. J. Struct. Geol., v.23(1), p.113-125. doi: 10.1016/S0191-8141(00)00067-5
- Barrett, P.J. (1980) The shape of rock particles, a critical review. Sedimentology, v.27(3), p.291-303. doi: 10.1111/j.1365-3091.1980.tb01179.x
- Cladouhos, T.T. (1999) Shape preferred orientation of survivor grains in fault gouge. J. Struct. Geol., v.21, p.419-436. doi: 10.1016/S0191-8141(98)00123-0
- Fleuty, M.J. (1975) Slickensides and slickenlines. Geological Magazine, v.112(3), p.319-322. doi: 10.1017/S0016756800047087
- Funato, A. and Ito, T. (2017) A new method of diametrical core deformation analysis for in-situ stress measurements. Int. J. Rock Mech. Min. Sci., v.91, p.112-118. doi: 10.1016/j.ijrmms.2016.11.002
- Gao, G., Li, Z. and Chang, C. (2022) Numerical simulation of diametrical core deformation and fracture induced by core drilling. Arab. J. Geosci., v.15(1), 59. doi: 10.1007/s12517-021-09378-0
- Keren, T.T. and Kirkpatrick, J.D. (2016) Data report: Tectonic and induced structures in the JFAST core. In Proc. IODP, v.343, no.343T, p.343T.
- Mair, K. and Abe, S. (2008) 3D numerical simulations of fault gouge evolution during shear: Grain size reduction and strain localization. EPSL, v.274(1-2), p.72-81. doi: 10.1016/j.epsl.2008.07.010
- Marques, F.O. and Coelho, S. (2003) 2-D shape preferred orientations of rigid particles in transtensional viscous flow. J. Struct. Geol., v.25(6), p.841-854. doi: 10.1016/S0191-8141(02)00089-5
- Masuda, T., Michibayashi, K. and Ohta, H. (1995) Shape preferred orientation of rigid particles in a viscous matrix: reevaluation to determine kinematic parameters of ductile deformation. J. Struct. Geol., v.17(1), p.115-129. doi: 10.1016/0191-8141(94)E0026-U
- Moore, D., Summers, R. and Byerlee, J. (1989) Sliding behavior and deformation textures of heated illite gouge. Journal of Structural Geology, v.11(3), p.329-342. doi: 10.1016/0191-8141(89)90072-2
- Nelson, E.P. (2006) Drill-hole design for dilational ore shoot targets in fault-fill veins. Economic Geology, v.101(5), p.1079-1085. doi: 10.2113/gsecongeo.101.5.1079
- Passhier, C.W. and Trouw, R.A.J. (2005) Microtectonics (Vol. 1): Springer. doi: 10.1007/3-540-29359-0
- Rutter, E.H., Maddock, R.H., Hall., S.H. and White, S.H. (1986) Comparative microstructures of natural and experimentally produced clay-bearing fault gouges. Pure Appl. Geophys., v.124, p.3-30. doi: 10.1007/BF00875717
- Saffer, D.M. and Marone, C. (2003) Comparison of smectite- and illite-rich gouge frictional properties: application to the updip limit of the seismogenic zone along subduction megathrusts. Earth Planet. Sci. Lett., v.215(1-2), p.219-235. doi: 10.1016/S0012-821X(03)00424-2
- Shelley, D. (1995) Asymmetric shape preferred orientations as shear-sense indicators. J. Struct. Geol., v.17, p.509-517. doi: 10.1016/0191-8141(94)00080-J
- Sills, D.W. (2010) The Fabric of Clasts, Veins and Foliations within the Actively Creeping Zones of the San Andreas Fault at SAFOD: Implications for Deformation Processes. Master's Thesis, University of Texas A&M, Texas, TX, USA.
- Sim, H., Song, Y., Kim, J., Yang, E., Yun, T.S. and Lim, J.H. (2020a) Measurement of 3d-shape preferred orientation (SPO) using synchrotron μ-CT: Applications for estimation of fault motion sense in a fault gouge. Minerals, v.10(6), p.528. doi: 10.3390/min10060528
- Sim, H., Song, Y., Hong, S. and Choi, S.J. (2020b) 3D Fabric Analysis in Fault Rock Using Synchrotron μ-CT: A Statistical Approach to SPO (Shape Preferred Orientation) for Estimation of Fault Motion. Minerals, v.10(11), p.994. doi: 10.3390/min10110994
- Simpson, C. and Schmid, S.M. (1983) An evaluation of criteria to deduce the sense of movement in sheared rocks. Geological Society of America Bulletin, v.94(11), p.1281-1288. doi: 10.1130/0016-7606(1983)94%3C1281:AEOCTD%3E2.0.CO;2
- Thomas, A.L. and Pollard, D.D. (1993) The geometry of echelon fractures in rock: implications from laboratory and numerical experiments. J. Struct. Geol., v.15(3-5), p.323-334. doi: 10.1016/0191-8141(93)90129-X
- Tjia, H.D. (1964) Slickensides and fault movements. GSA Bulletin, v.75.7, p.683-686. doi: doi.org/10.1130/0016-7606(1964)75[683:SAFM]2.0.CO;2
- Vrolijk, P. and van der Pluijm, B.A. (1999) Clay gouge. J. Struct. Geol., v.21, p.1039-1048. doi: 10.1016/S0191-8141(99)00103-0
- Walter, J., Salsac, A.V. and Barthes-Biesel, D. (2011) Ellipsoidal capsules in simple shear flow: prolate versus oblate initial shapes. J. Fluid Mech., v.676, p.318-347. doi: 10.1017/S0022112011000486
- Wegner, S., Stannarius, R., Boese, A., Rose, G., Szabo, B., Somfai, E. and Borzsonyi, T. (2014) Effects of grain shape on packing and dilatancy of sheared granular materials. Soft Matter, v.10(28), p.5157-5167. doi: 10.1039/C4SM00838C
- Wu, F.T. (1978) Mineralogy and physical nature of clay gouge. Pure Appl. Geophys., v.116, p.655-689. doi: 10.1007/BF00876531