• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.11-15
• /
• 1994

본 고에서는 축대칭회전 Shell을 해석모델로 선정하여 주로 Shell의 휨 강성이 구조체의 거동에 미치는 영향에 대하여 검토하였다. 어떠한 구조형식이든 외력의 작용하에서 발생되는 응력이 축방향력 뿐이라는 것은 상당히 합리적이고 역학적으로도 명쾌한 동시에, 실제 설계상 이상적인 판단기준을 부여하지만, 실제로는 필히 휨상태를 수반하게 된다. 이러한 휨상태는 구성요소의 휨강성에 크게 의존하고 있고, 구조체에 어느정도의 휨강성을 부여하므로써 작용하중에 대한 저항능력의 증가, 변형 및 응력의 저감에 효과적이라는 것을 알 수 있다. 본 고에서는 등방성 Shell에 대한 선형 해석결과만을 게재하였으나, 이러한 성상은 여러가지 영향인자(지지조건, 하중상태 등)에 따라 아주 상이하게 나타나기 때문에 세심한 고찰이 필요하다고 할 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.210-216
• /
• 1994

본 연구에서는 볼 베어링의 전동체 회전에 의해 발생하는 원심력, 자이로스코픽 모멘트, 하중 방향선에 대한 전동체의 하중 분포 변화 등을 고려하여, 볼 베어링의 강성 특성을 해석하고, 볼 베어링으로 지지되는 간단한 회전축 계에 해석 결과를 적용하여 진동 특성을 해석하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.132-139
• /
• 1992

This paper presents geometrically nonlinear formulation of shell problems using the three-dimensional curved shell element, which includs large displacements and large rotations. Formulations of the geometrically nonlinear problems can be derived in a variety of ways, but most of them have been obtained by assuming that nodal rotations are small. Hence, the tangent stiffness matrix is derived under the assumptions that rotational increments are infinitesimal and the effect of finite rotational increments have to be considered during the equilibrium iterations. To study the large displacement and large rotation problems, the restrictions are removed and the formulations of the curved shell element including the effect of large rotational increments are developed in this paper. The displacement based finite element method using this improved formulation are applied to the analyses of the geometrically nonlinear behaviors of the single and double curved shells, which are compared with the results by others.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.715-723
• /
• 2001

This paper represents the behavior of CFT column to H-beam full-scale connection with external T-stiffener. 6 specimens whose T-stiffeners which are compounded of vertical element and horizontal element were made under the parameter of the strength ratio of each elements(vertical element and horizontal element in T-stiffener) to the beam full plastic moment. The analysis-parameters demonstrated in the base of the data that we get in experiment are strength stiffness, and plastic rotational capacity. All of specimen showed stable hysteretic behavior, and the horizontal element is more critical than vertical element in strength and stiffness. The mean beam plastic rotation of all specimen except the TS-2 specimen is 2.97% rad.

• 전기의세계
• /
• v.46 no.8
• /
• pp.34-40
• /
• 1997

케이블 시스템의 사고는 예방 진단에 근거한 정확한 진단으로 피할 수 있으며, 잔여수명 예측 기술은 진단 방법의 체계적인 적용에 의해 향상될 수 있다. 따라서 본 고에서는 케이블 시스템 진단 방법의 체계적인 개발을 위해서 60 kV급 이상의 종이 절연 혹은 고분자 절연 전력 케이블과 그 접속 자재에 대해서만 진단 방법을 개략적으로 소개만하고 있으며 수트리에 관련된 열화, 절연체의 열화를 제외한 모든 열화현상과 DC 케이블에 대해서는 언급을 하지 않았다. 회전기 고체절연체의 열화에 의해 야기되는 변화는 회전기 진동을 발생 시키고, 진동은 기계에 심각한 손상을 발생시킨다. 회전기의 절연열화 진단은 유전손실, 유전율, 음향 등의 측정/분석으로 가능하고 적용 방법은 on-line/off-line으로 가능하다. 절연 시스템의 열화정도 판정은 회전기의 적절한 보수시기의 판단을 가능하게 하여 유지 보수비의 절감 및 회전기의 수명연장을 가능하게 할 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2008

In the case of the railway bridges, uplift forces were occurred at the edge of the segments when vehicular loads were applied. These forces caused the compressive and tensile forces in the fastening system. In the past, a structural analysis has been performed to investigate the safety of fastening system which was modeled with one directional spring elements based on the compressive test of fastening system. In this case, the stiffness of the spring element was obtained from experimental study which was conducted by compressive load. Therefore, to perform rational and exact structural analysis, the translational stiffness of the fastening system obtained from the experimental study applied the tensile load and the rotational stiffness should be considered because it was occurred the tensile force as well as the compressive force in fastening system. In this study, an elastic and inelastic experimental study was performed for six specimens. The translational stiffness along the vertical axis of rail and the rotational stiffness along the strong axis of rail were investigated, also structural behavior of the fastening system was analyzed.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.2
• /
• pp.99-110
• /
• 2017

This paper presents the study of the bending behavior of mooring chain links for keeping the position of the offshore floating structures. In general, chain links have been thought as the axial members due to the fundamental boundary condition. But, the flexural stiffness can be induced to the contact surface between chain links when friction occurs at the surface of the chain links due to high tensile force. Especially, the mooring chains for offshore floating platforms are highly tensioned. If the floater suffers rotational motion and the mooring chain links are highly tensioned, the rotation between contact links, induced by the floater rotation, generates the bending moment and relevant stresses due to the unexpected bending stiffness. In 2005, the mooring chain links for the Girassol Buoy Platform were failed after just 5 months after facility installation, and the accident investigation research concluded the chain failure was mainly caused by the fatigue due to the unexpected bending stress fluctuation. This study investigates the pattern of the induced bending stiffness and stresses of the highly tensioned chain links by nonlinear finite element analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.507-515
• /
• 2015

This study was conducted to develop and verify a torque application device for use in a mechanical power-circulation test rig for 5.5 MW wind turbine gearboxes. The design and analysis of the torque application device was conducted. In addition, the torsional stiffness of the test rig was calculated using the rotational angle measurements for each of the components. The calculated stiffness of the test rig was $231.13kN{\cdot}m/rad$ for a clockwise torque application. The rated torque can be applied when the stiffness of the gearbox is greater than $1,064,400kN{\cdot}m/rad$ for a clockwise torque application. Because of the limited rotational angle of the test rig, the potential application of the rated torque is determined according to the torsional stiffness of the test gearbox.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.2
• /
• pp.133-142
• /
• 2014

Double split tee connection is a full strength-partial restrained connection that suitable for ordinary moment frame and special moment frame which demonstrates behavior characteristics depending on the stiffness ratio of columns and beams, changes in the geometric shape of the T-stub, number of fasteners and effect of panel zone. For the double split tee connection to ensure structurally safe behavior, it needs to exhibit sufficient strength, stiffness and ductile capacity. This study sought to investigate the effects of the moment-rotation angle relationship of the double split tee connection and to evaluate the initial rotational stiffness of the double split tee connection depending on changes in the geometric shape of the T-stub. To this end, two different double split tee connection specimens are experimented which designed to change geometric parameter values (${\alpha}^{\prime}$) of the T-stub, and a three-dimensional finite element analysis was performed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.4
• /
• pp.274-286
• /
• 1996

Two-dimensional flexible body analysis (hydroelasticity theory) is adopted to a very large floating structure that may be multimodule and extend in the longitudinal direction. The boundary-element method (BEM) and Green function method(GFM) are used to obtain the hydrodynamic coefficients. The structure is considered to be a flexible beam responding to waves in the vertical direction and a consistent formulation for the hydrostatic stiffness is derived. The resulting coupled equations of motion are solved directly. Two designs of the module connectors are considered: a rotationally-flexible hinge connector, and a rotationally-rigid connector Numerical examples are presented to an integrated system of semi-submersibles. The analysis provides basic motions and section forces, which are useful to develop an understanding of the fundamental modes of displacement and force amplitudes for which multi-module VLFSs must be designed. The results show that while the hinge connectors result in greater motion, the rigid connectors increase substantially the sectional moments.