과제정보
This work was supported by Comprehensive Research Facility for Fusion Technology Program of China [2018-000052-73-01-001228]; and the National MCF Energy R&D Program [2018YFE0312300].
참고문헌
- N. Baluc, K. Abe, J.L. Boutard, et al., Status of R&D activities on materials for fusion power reactors, Nucl. Fusion 47 (2007) S696, https://doi.org/10.1088/0029-5515/47/10/S18.
- M. Rieth, S.L. Dudarev, S.M.G. De Vicente, et al., Recent progress in research on tungsten materials for nuclear fusion applications in Europe, J. Nucl. Mater. 432 (2013) 482-500, https://doi.org/10.1016/j.jnucmat.2012.08.018.
- Y.X. Wan, J.G. Li, Y. Liu, et al., Overview of the present progress and activities on the CFETR, Nucl. Fusion 57 (2017), 102009. https://10.1088/1741-4326/aa686a.
- J.G. Li, Y.X. Wan, Present state of Chinese magnetic fusion development and future plans, J. Fusion Energy 38 (2019) 113-124, https://doi.org/10.1007/s10894-018-0165-2.
- S.J. Zinkle, L.L. Snead, Designing radiation resistance in materials for fusion energy, Annu. Rev. Mater. Res. 44 (2014) 241-267, https://doi.org/10.1146/annurev-matsci-070813-113627.
- A. Tincani, M.G. D'Angelo, P.A. Di Maio, et al., Hydraulic characterization of the full scale divertor cassette prototype, Fusion Eng. Des. (2011) 1673-1676, https://doi.org/10.1016/j.fusengdes.2010.12.006.
- J.H. You, R. Villari, D. Flammini, et al., Nuclear loads and nuclear shielding performance of EU DEMO divertor: a comparative neutronics evaluation of two interim design options, Nucl. Mater. Energy. 23 (2020), 100745, https://doi.org/10.1016/j.nme.2020.100745.
- J. Linke, High heat flux performance of plasma facing materials and components under service conditions in future fusion reactors, Fusion Sci. Technol. 2006 (2006) 455-464, https://doi.org/10.13182/FST06-A1144.
- H. Bolt, V. Barabash, G. Federici, et al., Plasma facing and high heat flux materialseneeds for ITER and beyond, J. Nucl. Mater. 307 (2002) 43-52, https://doi.org/10.1016/S0022-3115(02)01175-3.
- S.J. Zinkle, Advanced materials for fusion technology, Fusion Eng. Des. 74 (2005) 31-40. https://doi.org/10.1016/j.fusengdes.2005.08.008
- Zhiwei Pan, Shenghong Huang, Menglai Jiang, In-situ measurements of deformation to fatigue failure on a flat-type divertor mock-up under high heat flux loads by 3D digital image correlation, Nucl. Fusion 61 (2021), 026018, https://doi.org/10.1088/1741-4326/abcc18.
- Y. Xu, C.Y. Xie, S.G. Qin, et al., Preliminary R&D on flat-type W/Cu plasma-facing materials and components for experimental advanced superconducting tokamak, Phys. Scripta T159 (2014), 014008, https://doi.org/10.1088/0031-8949/2014/T159/014008.
- H. Bolt, V. Barabash, W. Krauss, et al., Materials for the plasma-facing components of fusion reactors, J. Nucl. Mater. 329 (2004) 66-73, https://doi.org/10.1016/j.jnucmat.2004.04.005.
- J.W. Davis, K.T. Slattery, D.E. Driemeyer, et al., Use of tungsten coating on iter plasma facing components, J. Nucl. Mater. 233 (1996) 604-608, https://doi.org/10.1016/S0022-3115(96)00209-7.
- J. Linke, J. Du, T. Loewenhoff, et al., Challenges for plasma-facing components in nuclear fusion, Matter Radiat. Extremes 4 (2019), 056201, https://doi.org/10.1063/1.5090100.
- A. Giannattasio, S.G. Roberts, Strain-rate dependence of the brittle-to-ductile transition temperature in tungsten, Philos. Mag. A 87 (2007) 2589e2598, https://doi.org/10.1080/14786430701253197.
- Y.C. Wu, Q.Q. Hou, L.M. Luo, et al., Preparation of ultrafine-grained/nanostructured tungsten materials: an overview, J. Alloys Compd. 779 (2019) 926-941, https://doi.org/10.1016/j.jallcom.2018.11.279.
- X. Ma, F. Feng, X. Zhang, et al., Effect of potassium bubbles on the thermal shock fatigue behavior of large-volume potassium-doped tungsten alloy, Nucl. Fusion 62 (2022), 126062, https://doi.org/10.1088/1741-4326/ac9a5b.
- S.J. Zinkle, A. Moslang, T. Muroga, et al., Multimodal options for materials research to advance the basis for fusion energy in the ITER era, Nucl. Fusion 53 (2013), 104024, https://doi.org/10.1088/0029-5515/53/10/104024.
- M. Rieth, S.L. Dudarev, S.M.G. de Vicente, Review on the EFDA Programme on Tungsten Materials 417 (2011) 463-467.
- Z.M. Xie, R. Liu, T. Zhang, et al., Achieving high strength/ductility in bulk W-Zr-Y2O3 alloy plate with hybrid microstructure, Mater. Des. 107 (2016) 144-152, https://doi.org/10.1016/j.matdes.2016.06.012.
- X. Ma, X. Zhang, T. Wang, et al., Large-scale potassium-doped tungsten alloy with superior recrystallization resistance, ductility and strength induced by potassium bubbles, J. Nucl. Mater. 559 (2022), 153450, https://doi.org/10.1016/j.jnucmat.2021.153450.
- M. Li, S.J. Zinkle, Compr. Nucl. Mater. 4 (2012) 667-690. https://doi.org/10.1016/B978-0-08-056033-5.00122-1
- N. Mou, X. Zhang, Q. Lin, et al., Fabrication and performance tests for ODS Cu/CLF-1 clad plate as divertor heat sink via explosive welding, IEEE Trans. Plasma Sci. 50 (2022) 4753-4758, https://doi.org/10.1109/TPS.2022.3210025.
- S.M.S. Aghamiri, N. Oono, S. Ukai, et al., Microstructure and mechanical properties of mechanically alloyed ODS copper alloy for fusion material application, Nucl. Mater. Energy. 15 (2018) 17-22, https://doi.org/10.1016/j.nme.2018.05.019.
- X. Chen, S. Qin, Q. Wang, et al., Fatigue life prediction of hypervapotron for CFETR divertor, Fusion Eng. Des. 174 (2022), 112985, https://doi.org/10.1016/j.fusengdes.2021.112985, 2022.
- B.C. Odegard, B.A. Kalin, A review of the joining techniques for plasma facing components in fusion reactors, J. Nucl. Mater. 233 (1996) 44-50. https://doi.org/10.1016/S0022-3115(96)00303-0
- N. Mou, L. Han, D. Yao, Study on the heat absorption coefficient of tungsten as the plasma-facing material for the upgraded EAST lower divertor, IEEE Trans. Plasma Sci. 50 (2022) 2455-2459, https://doi.org/10.1109/TPS.2022.3185715.
- T. Hirai, F. Escourbiac, V. Barabash, et al., Status of technology R&D for the ITER tungsten divertor monoblock, J. Nucl. Mater. 463 (2015) 1248-1251, https://doi.org/10.1016/j.jnucmat.2014.12.027.
- K. Ezato, S. Suzuki, Y. Seki, et al., Progress of ITER full tungsten divertor technology qualification in Japan, Fusion Eng. Des. 98 (2015) 1281-1284, https://doi.org/10.1016/j.fusengdes.2015.03.009.