과제정보
This work was supported by the Research on key technology and safety verification of primary circuit, Grant No. 2020YFB1902104, the Experimental study on thermal hydraulics of fuel rod bundle, Grant No. Y828020XZ0 and the National Natural Science Foundation-Outstanding Youth Foundation, Grant No.12122512.
참고문헌
- T. Abram, S. Ion, Generation-IV nuclear power: a review of the state of the science, Energy Pol. 36 (2008) 4323-4330. https://doi.org/10.1016/j.enpol.2008.09.059
- X.-K. Su, X.-W. Li, L. Zhang, L. Gu, D.-J. Fan, Thermal-hydraulic study in a wire-wrapped 19-rod bundle based on an isotropic four-equation model, Ann. Nucl. Energy 178 (2022), 109343.
- X.J. Liu, D.M. Yang, Y. Yang, X. Chai, J.B. Xiong, T.F. Zhang, X. Cheng, Computational fluid dynamics and subchannel analysis of leadebismuth eutecticcooled fuel assembly under various blockage conditions, Appl. Therm. Eng. 164 (2020), 114419.
- S. He, M. Wang, J. Zhang, W. Tian, S. Qiu, G.H. Su, Numerical simulation of three-dimensional flow and heat transfer characteristics of liquid leadebismuth, Nucl. Eng. Technol. 53 (2021) 1834-1845. https://doi.org/10.1016/j.net.2020.12.025
- X. Cheng, N. Tak, Investigation on turbulent heat transfer to lead-bismuth eutectic flows in circular tubes for nuclear applications, Nucl. Eng. Des. 236 (2006) 385-393. https://doi.org/10.1016/j.nucengdes.2005.09.006
- R. da Via, S. Manservisi, F. Menghini, A k-Ω-kθ-Ωθ four parameter logarithmic turbulence model for liquid metals, Int. J. Heat Mass Tran. 101 (2016) 1030-1041. https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.084
- X. Su, X. Li, X. Wang, Y. Liu, Q. Chen, Q. Shi, X. Sheng, L. Gu, Development and assessment of an isotropic four-equation model for heat transfer of low Prandtl number fluids, Front, Application of Plant Secondary Metabolites to Pain Neuromodulation, Volume II 10 (2022), 890795034.
- S. Manservisi, F. Menghini, A CFD four parameter heat transfer turbulence model for engineering applications in heavy liquid metals, Int. J. Heat Mass Tran. 69 (2014) 312-326. https://doi.org/10.1016/j.ijheatmasstransfer.2013.10.017
- K. Abe, T. Kondoh, Y. Nagano, A new turbulence model for predicting fluid flow and heat transfer in separating and reattaching flows-II. Thermal field calculations, Int. J. Heat Mass Tran. 38 (1995) 1467-1481. https://doi.org/10.1016/0017-9310(94)00252-Q
- D. Cerroni, R. da Via, S. Manservisi, F. Menghini, G. Pozzetti, R. Scardovelli, Numerical validation of a k-ω-kθ-ωθ heat transfer turbulence model for heavy liquid metals, in: J Phys Conf Ser, IOP Publishing, 2015, 012046.
- B. Deng, W. Wu, S. Xi, A near-wall two-equation heat transfer model for wall turbulent flows, Int. J. Heat Mass Tran. 44 (2001) 691-698. https://doi.org/10.1016/S0017-9310(00)00131-9
- Y. Nagano, M. Shimada, Development of a two-equation heat transfer model based on direct simulations of turbulent flows with different Prandtl numbers, Phys. Fluids 8 (1996) 3379-3402. https://doi.org/10.1063/1.869124
- S. Manservisi, F. Menghini, Triangular rod bundle simulations of a CFD k-ε-kθ-εθ heat transfer turbulence model for heavy liquid metals, Nucl. Eng. Des. 273 (2014) 251-270. https://doi.org/10.1016/j.nucengdes.2014.03.022
- S. Manservisi, F. Menghini, CFD simulations in heavy liquid metal flows for square lattice bare rod bundle geometries with a four parameter heat transfer turbulence model, Nucl. Eng. Des. 295 (2015) 251-260. https://doi.org/10.1016/j.nucengdes.2015.10.006
- J. Khalesi, N. Sarunac, Numerical analysis of flow and conjugate heat transfer for supercritical CO2 and liquid sodium in square microchannels, Int. J. Heat Mass Tran. 132 (2019) 1187-1199. https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.071
- H.A. Johnson, J.P. Hartnett, W. Clabaugh, Heat transfer to molten lead-bismuth eutectic in turbulent pipe flow, Trans. Am. Soc. Mech. Eng. 75 (1953) 1191-1198. https://doi.org/10.1115/1.4015579
- M. Darwish, F. Moukalled, The Finite Volume Method in Computational Fluid Dynamics: an Advanced Introduction with OpenFOAM® and Matlab®, Springer, 2021.
- X. Li, X. Su, L. Gu, L. Zhang, X. Sheng, Numerical study of low Pr flow in a bare 19-rod bundle based on an advanced turbulent heat transfer model, Front. Energy Res. (2022) 743.
- M. Duponcheel, L. Bricteux, M. Manconi, G. Winckelmans, Y. Bartosiewicz, Assessment of RANS and improved near-wall modeling for forced convection at low Prandtl numbers based on LES up to Reτ= 2000, Int. J. Heat Mass Tran. 75 (2014) 470-482. https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.080
- L.-B. Handbook, Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-Hydraulics and Technology, Nuclear Energy Agency, NEA, 2007.
- B.E. Launder, D.B. Spalding, Lectures in Mathematical Models of Turbulence, 1972.
- B.E. Launder, D.B. Spalding, The numerical computation of turbulent flows, in: Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion, Elsevier, 1983, pp. 96-116.
- A. Hellsten, Some improvements in Menter's k-omega SST turbulence model, in: 29th Aiaa, Fluid Dynamics Conference, 1998, p. 2554.
- F. Menter, T. Esch, Elements of industrial heat transfer predictions, in: 16th Brazilian Congress of Mechanical Engineering, COBEM), 2001, p. 650.
- F.R. Menter, M. Kuntz, R. Langtry, Ten years of industrial experience with the SST turbulence model, Turbulence, Heat and Mass Transfer 4 (2003) 625-632.
- B.E. Launder, B.I. Sharma, Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc, Lett. Heat Mass Tran. 1 (1974) 131-137. https://doi.org/10.1016/0094-4548(74)90150-7
- D.C. Wilcox, Turbulence Modeling for CFD, DCW industries La Canada, CA, 1998.
- V. Yakhot, S.A. Orszag, S. Thangam, T.B. Gatski, C. Speziale, Development of turbulence models for shear flows by a double expansion technique, Phys. Fluid. Fluid Dynam. 4 (1992) 1510-1520. https://doi.org/10.1063/1.858424
- J.K. Fink, L. Leibowitz, Thermodynamic and Transport Properties of Sodium Liquid and Vapor, Argonne National Lab., 1995.
- J. Pacio, L. Marocco, T. Wetzel, Review of data and correlations for turbulent forced convective heat transfer of liquid metals in pipes, Heat Mass Tran. 51 (2015) 153-164. https://doi.org/10.1007/s00231-014-1392-3
- S.S. Kutateladze, V.M. Borishanskii, I.I. Novikov, Heat transfer in liquid metals, Soviet J. Atom. Energy 4 (1958) 555-571. https://doi.org/10.1007/BF01497931
- V.I. Subbotin, A.K. Papovyants, Pl. Kirillov, N.N. Ivanovskii, A study of heat transfer to molten sodium in tubes, Sov. Atom. Energy 13 (1963) 991-994. https://doi.org/10.1007/BF01480861
- C. Ching-Jen, J.S. Chiou, Laminar and turbulent heat transfer in the pipe entrance region for liquid metals, Int. J. Heat Mass Tran. 24 (1981) 1179-1189. https://doi.org/10.1016/0017-9310(81)90167-8
- E. Skupinski, J. Tortel, L. Vautrey, Determination des coefficients de convection d'un alliage sodium-potassium dans un tube circulaire, Int. J. Heat Mass Tran. 8 (1965) 937-951. https://doi.org/10.1016/0017-9310(65)90077-3
- R.H. Notter, C.A. Sleicher, A solution to the turbulent Graetz problem-III Fully developed and entry region heat transfer rates, Chem. Eng. Sci. 27 (1972) 2073-2093. https://doi.org/10.1016/0009-2509(72)87065-9