과제정보
본 연구는 산업통산자원부의 지원을 받아 수행한 연구 과제(과제번호 20011899)의 일환으로 수행되었습니다.
참고문헌
- G. Song and H. Kim, "Optimization process of type 4 composite pressure vessels using genetic and simulated annealing algorithm", Trans Korean Hydrogen New Energy Soc, Vol. 32, No. 4, 2021, pp. 212-218, doi: https://doi.org/10.7316/KHNES.2021.32.4.212.
- M. S. Kim, J. H. Ryu, S. Y. Jung, S. W. Lee, and S. W. Choi, "Numerical analysis of discharge flow in type III hydrogen tank with different gas models", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 6, 2020, pp. 558-563, doi: https://doi.org/10.7316/KHNES.2020.31.6.558.
- I. H. Choi, "Study on the burst pressure of type 3 cylinders for high-pressure gases [master's thesis]", Cheongju: Chungbuk National University; 2014, p. 1.
- C. K. Kim and S. C. Kim, "Numerical study on the strength safety of high pressure gas cylinder", Journal of the Korean Institute of Gas, Vol. 14, No. 2, 2010, pp. 16. Retrieved from https://scienceon.kisti.re.kr/srch/selectPORSrchArticle.do?cn=JAKO201027463260584&SITE=CLICK. 1027463260584&SITE=CLICK
- T. K. Hwang, J. B. Park, H. K. Kim, and S. W. Lee, "Hoop ring test method to evaluate the fiber material properties of composite motor case", Proceedings of the Korean Society of Propulsion Engineers Conference, Vol. 33, 2009, pp. 429-432. Retrieved from http://koreascience.or.kr/article/CFKO200911764903341.page.
- Y. H. Kim, S. C. Kwon, and C. M. Yim, "A Study on the optimum evaluation method for tensile NOL ring specimen manufactured by filament winding process", Composites Research, Vol. 14, No. 2, 2001, pp. 812. Retrieved from http://www.koreascience.or.kr/article/JAKO200111920913363.pdf.
- W. R. Park, S. K. Jeon, S. M. Kim, and O. H. Kwon, "A study on the design safety of type III high-pressure hydrogen storage vessel", Journal of the Korean Society of Safety, Vol. 34, No. 5, 2019, pp. 7-14, doi: https://doi.org/10.14346/JKOSOS.2019.34.5.7.
- M. G. Park, "Material properties and structure performance evaluation of carbon/epoxy-aluminum type III hydrogen storage vessel [master's thesis]", Seoul: Chung-ang University; 2011.
- H. G. Lee, D. Kim, J. Y. Park, and W. J. Kim, "FEA study on hoop stress of multilayered sic composite tube for nuclear fuel cladding", Journal of the Korean Ceramic Society, Vol. 51, No. 5, 2014, pp. 435-441, doi: https://doi.org/10.4191/kcers.2014.51.5.435.
- A. Onder, O. Sayman, T. Dogan, and N. Tarakcioglu, "Burst failure load of composite pressure vessels", Composite Structures, Vol. 89, No. 1, 2009, pp. 159-166, doi: https://doi.org/10.1016/j.compstruct.2008.06.021.
- Z. Hashin, "Failure criteria for unidirectional fiber composites", Journal of Applied Mechanics, Vol. 47, No. 2, 1980, pp. 329-334, doi: https://doi.org/10.1115/1.3153664.