Acknowledgement
이 연구는 한국연구재단의 한-인도 해외협력기반조성사업(2020K1A3A1A19088692)의 지원으로 수행되었습니다. 지원기간에 감사드립니다.
References
- Z. Lee, T. Kim, S. Park and S. Park, "Review on spray, combustion, and emission characteristics of recent developed direct-injection spark ignition (DISI) engine system with multi-hole type injector", Fuel, Vol. 259, No. 116209, 2020.
- T. V. Johnson, "Review of Vehicular Emissions Trends", SAE International Journal of Engines, Vol. 8, No. 3, 2015, pp. 1152~1167. https://doi.org/10.4271/2015-01-0993
- J. Kazour, B. Befrui, H. Husted, M. Raney and D. Varble, "Innovative Sprays and Particulate Reduction with GDi Injectors", SAE Technical Paper, 2014-01-1441, 2014.
- H. Oh, J. Lee, S. Han, C. Park, C. Bae, J. Lee, I. K. Seo and S. J. Kim, "Effect of injector nozzle hole geometry on particulate emissions in a downsized direct injection gasoline engine", SAE Technical Paper, 2017-24-0111, 2017.
- A. Montanaro, L. Allocca and G. Meccariello, "Effects of Ultra-High Injection Pressures up to 100 MPa on Gasoline Spray Morphology", SAE Technical Paper, 2020-01-0320, 2020.
- F. Leach, T. Knorsch, C. Laidig and W. Wiese, "A Review of the Requirements for Injection Systems and the Effects of Fuel Quality on Particulate Emissions from GDI Engines", SAE Technical Paper, 2018-01-1710, 2018.
- S. Tripathy, S. Sahoo and D. K. Srivastava, "Gasoline Direct Injection-Challenges", Combustion for Power Generation and Transportation, 2017, pp. 367~379.
- S. Mouvanal, A. Burkhardt, S. Bakshi and D. Chatterjee, "Numerical study of purging of a gasoline direct injection nozzle at the end of injection", International Journal of Engine Research, Vol. 22, No. 5, 2021, pp. 1670~1684. https://doi.org/10.1177/1468087420916658
- S. Lee and S. Park, "Spray atomization characteristics of a GDI injector equipped with a group-hole nozzle", Fuel, Vol. 137, 2014, pp. 50~59. https://doi.org/10.1016/j.fuel.2014.07.063
- S. Lee and S. Park, "Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30 MPa", International Journal of Heat and Fluid Flow, Vol. 45, 2014, pp. 14~22. https://doi.org/10.1016/j.ijheatfluidflow.2013.11.005
- K. Nishida, J. Tian, Y. Sumoto, W. Long, K. Sato and M. Yamakawa, "An experimental and numerical study on sprays injected from two-hole nozzles for DISI engines", Fuel, Vol. 88, No. 9, 2009, pp. 1634~1642. https://doi.org/10.1016/j.fuel.2009.01.003
- L. Zhao, R. Torelli, X. Zhu, R. Scarcelli, S. Som, H. Schmidt, J. Naber and S.-Y. Lee, "An Experimental and Numerical Study of Diesel Spray Impingement on a Flat Plate", SAE International Journal of Fuels and Lubricants, Vol. 10, No. 2, 2017, pp. 407~422. https://doi.org/10.4271/2017-01-0854
- M. Chang, J. Park, B. Kim, J. H. Park, S. Park and S. Park, "Effect of sac-volume on the relationship among ball behavior, injection and initial spray characteristics of ultra-high pressure GDI injector", Fuel, Vol. 285, No. 119089, 2021.
- H. Gong, W. Huang, Y. Gao, J. Wang, A. Arioka and Y. Sasaki, "End-of-injection fuel dribbling dynamics of multi-hole GDI injector", Fuel, Vol. 317, No. 123406, 2022.
- S. Wu, A. Gandhi, H. Li and M. Meinhart, "Experimental and numerical study of the effects of nozzle taper angle on spray characteristics of GDI multi-hole injectors at cold condition", Fuel, Vol. 275, No. 117888, 2020.
- J. Park, J. H. Park and S. Park, "Study on individual spray plume characteristics of multi-hole direct injection spark ignition (DISI) injector using cross-sectional area", Fuel, Vol. 262, No. 116329, 2020.
- J. Park and S. Park, "Spray Development Process Utilizing a Multi-Hole GDI Injector with Different Spray Hole Lengths and Step Hole Diameters", International Journal of Automotive Technology, Vol. 23, 2022, pp. 641~649. https://doi.org/10.1007/s12239-022-0058-2