References
- Jung, S. T., Wi, E. C., Kim, H. J., & Baek, S. Y., Reliability verification of cutting force experiment by the 3D-FEM analysis from reverse engineering design of milling tool. J. Korea Society of Die & Mold Engineering, Vol. 13, No. 2, p. 54-59, 2019.
- Baek, S. Y., Jung, S. T., & Park, D. Y., "A Study on Proposal of Flank Wear Criterion by Using a Built-in Current Sensor when Manufacturing the Mold Materials in a Smart Machine Tool", In MATEC Web of Conferences, Vol. 207, p. 03007, EDP Sciences, 2018.
- Jung, S. T., Kim, S. H., Kim, H. J., Baek, S. Y., Prediction and Experiments of Cutting Forces in Down Milling of Hardened Mold Steel. Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 27, No. 4, p. 346-350, 2018. https://doi.org/10.7735/ksmte.2018.27.4.346
- Altintas, Y. "Manufacturing automation. Cambridge University Pres, New York," USA, p. 54-62, 2000.
- Lee, S. T., & Im, Y. M., "Prediction and Experiments of cutting forces in end milling," Transactions of the korean society of machine tool Engineers, Vol. 31, No. 4, p. 9-15, 2004.
- Khorasani, A. M., Yazdi, M. R. S., & Safizadeh, M. S. Tool life prediction in face milling machining of 7075 Al by using artificial neural networks (ANN) and Taguchi design of experiment (DOE). International Journal of Engineering and Technology, Vol. 3, No. 1, p. 30, 2011.
- Bagri, S., Manwar, A., Varghese, A., Mujumdar, S., & Joshi, S. S., Tool wear and remaining useful life prediction in micro-milling along complex tool paths using neural networks. Journal of Manufacturing Processes, Vol. 71, p. 679-698, 2021. https://doi.org/10.1016/j.jmapro.2021.09.055
- He, Z., Shi, T., Xuan, J., & Li, T., Research on tool wear prediction based on temperature signals and deep learning. Wear, Vol. 478, 2021.
- Lee, J. C., & Cho, M. W., (for the 21st century) Manufacturing Process, seoul: Munundang, p. 411-418, 2002.