Acknowledgement
본 연구는 중소벤처기업부의 2022년도 중소기업 기술혁신개발사업 (과제번호 : S3269454) 지원을 받아 수행 된 연구결과 입니다.
References
- Istvan Muka, Antal Huba, "The Comparison of Solid Silicone Rubber Types Manufactured by Diverse Technologies", Materials Science Forum, Vol. 589, No. 23, pp. 123-129, 2008 https://doi.org/10.4028/www.scientific.net/MSF.589.123
- E. Haberstroh, W. Michaeli, E. Henze, "Simulation of the Filling and Curing Phase in Injection Molding of Liquid Silicone Rubber (LSR)",Journal of Reinforced Plastics and Composites, Vol. 21, No. 5, 2002
- Gibson L. Batch, Christopher W. Macosko, Daniel N. Kemp, "Reaction Kinetics and Injection Molding of Liquid Silicone Rubber", Rubber Chemistry and Technology, Vol. 64, No. 2, pp. 218-233, 1991 https://doi.org/10.5254/1.3538554
- Weisser, D. F., Mayer, D., Schmid, J., Deckert, M. H., "Novel approach to characterize the cross-linking effect of liquid silicone rubber via cavity pressure analysis during injection molding",Journal of Applied Polymer Science, e53381, 2022
- Christian Hopmann, Clemens Behmenburg, Ulf Recht & Katja Zeuner, "Injection Molding of Superhydrophobic Liquid Silicone Rubber Surfaces", Silicon, Vol. 6, pp. 35-43, 2014 https://doi.org/10.1007/s12633-013-9164-0
- Park, HP.,Baeg SC.,Lee,JW., Ko YB., Kim SG.,Jung TS., Kim DH., Rhee BO., "Effects of Variation in Process Parameters on Cavity Pressure and Mechanical Strength of Molded Parts in LSR Injection Molding." Journal of Manufacturing Engineering & Technology, Vol. 23, No. 2, pp. 206-212, 2014
- Ou, H., Sahli, M., Barriere, T. et al. "Multiphysics modelling and experimental investigations of the filling and curing phases of bi-injection moulding of thermoplastic polymer/liquid silicone rubbers",The International Journal of Advanced Manufacturing Technology, Vol. 92, pp. 3871-3882, 2007 https://doi.org/10.1007/s00170-017-0425-8
- Kuo, CC., Lin, JX., "A cost-effective method for rapid manufacturing polymer rapid tools used for liquid silicone rubber injection molding", The International Journal of Advanced Manufacturing Technology Vol. 104, pp. 1159-1170, 2019 https://doi.org/10.1007/s00170-019-04000-w
- Kuo, CC., Lin, JX., "Fabrication of the Fresnel lens with liquid silicone rubber using rapid injection mold", The International Journal of Advanced Manufacturing Technology, Vol. 101, pp. 615-625, 2019 https://doi.org/10.1007/s00170-018-2964-z
- Kuo CC. Tasi QZ., Hunag SH., and Song-Hua Hunag., "Development of an Epoxy-Based Rapid Tool with Low Vulcanization Energy Consumption Channels for Liquid Silicone Rubber Injection Molding", Polymers, Vol. 14, No. 21: 4534, 2022
- Haberstroh,, E. and Ronnewinkel,, C.. "LSR THERMOPLASTIC COMBINATION PARTS IN TWO-COMPONENT INJECTION MOLDING" Journal of Polymer Engineering, Vol. 21, No. 2-3, pp. 303-318, 2001 https://doi.org/10.1515/POLYENG.2001.21.2-3.303
- Ghanbari-Siahkali, A., Mitra, S., Kingshott, P., Almdal, K., Bloch, C., Rehmeier, H., "Investigation of the hydrothermal stability of cross-linked liquid silicone rubber (LSR)", Polymer Degradation and Stability, Vol. 90, pp. 471-480, 2005 https://doi.org/10.1016/j.polymdegradstab.2005.04.016
- Geng, C., Zhang, Q., Lei, W., Yu, F. and Lu, A., "Simultaneously reduced viscosity and enhanced strength of liquid silicone rubber/silica composites by silica surface modification", Journal of Applied Polymer Science, Vol. 134, No. 47, 2017
- Zhao, X., Zang, C., Sun, Y. et al., "Borosiloxane oligomers for improving adhesion of addition-curable liquid silicone rubber with epoxy resin by surface treatment", Journal of Materials Science, Vol. 53, pp. 1167-1177, 2018 https://doi.org/10.1007/s10853-017-1589-1
- Sun J., Kong J., He C., "Liquid polyoctahedral silsesquioxanes as an effective and facile reinforcement for liquid silicone rubber",Journal of Applied Polymer Science, Vol. 136, No. 4, 2019
- Sourour, S., Kamal, M. R., "Differential scanning calorimetry of epoxy cure: isothermal cure kinetics", Thermochimica Acta, Vol.14, pp. 41-59. 1976 https://doi.org/10.1016/0040-6031(76)80056-1
- L. Barral, J. Cano, J. LoApez, I. Lopez-Bueno, P. Nogueira, "Cure kinetics of amine-cured diglycidyl ether of bisphenol A epoxy blended with poly(etherimide)", Thermochim. Acta, Vol.344, pp. 127-136, 2000 https://doi.org/10.1016/S0040-6031(99)00335-4
- Ren, R., Xiong, X., Ma, X., Liu, S., Wang, J., Chen, P., Zeng, Y. "Isothermal curing kinetics and mechanism of DGEBA epoxy resin with phthalide-containing aromatic diamine", Thermochimica Acta, Vol. 623, pp. 15-21, 2016 https://doi.org/10.1016/j.tca.2015.11.011