DOI QR코드

DOI QR Code

A Design of Vehicle for Mobile 3D Printer

이동형 3D 프린터를 위한 차량 설계

  • 박준영 (남서울대학교 전자공학과) ;
  • 김하연 (남서울대학교 전자공학과) ;
  • 백승훈 (남서울대학교 전자공학과) ;
  • 김민석 (남서울대학교 전자공학과) ;
  • 이승대 (남서울대학교 전자공학과)
  • Received : 2022.12.07
  • Accepted : 2023.02.17
  • Published : 2023.02.28

Abstract

In this paper, based on Arduino, a vehicle is installed at the bottom of the 3D printer so that Arduino controls the vehicle that can expand the moving space. A stepping motor was mounted on the front wheel of the vehicle and precisely controlled using a motor driver. As a result, when moving 5cm, 25cm, and 50cm, the mean value of error rate was 0.6%, 0.04%, and 0.02%, respectively, to enable accurate distance control.

본 논문에서는 아두이노를 기반으로 3D 프린터의 하단부에 차량을 설치하여 3D 프린터의 이동 공간을 확장할 수 있는 차량을 제어할 수 있도록 구현하였다. 차량의 전면부 바퀴에 스테핑 모터를 장착하고 모터 드라이버를 사용하여 정밀 제어하였다. 그 결과 5cm와 25cm, 50cm 이동 시 평균 오차율이 각각 0.6%, 0.04%, 0.02%로 정밀한 거리를 제어할 수 있는 것을 확인하였다.

Keywords

References

  1. H. Jung and J. Kim, "Fabrication of Piezo-Driven Micropositioning Stage using 3D printer," J. Korean Society for Precision Engineering, vol. 31, no. 3, 2014, pp. 277-283. https://doi.org/10.7736/KSPE.2014.31.3.277
  2. D. Jang, H. Lee, and J. Oh, "Design of Individual 3D Printer Remote Safety and Quality Management System Based on IoT Beacon," J. of the Korea Institute of Electronic Communication Sciences, vol. 15, no. 2, Apr. 2020, pp. 225-230.
  3. H. Kim, J. Kim, and S. Baek, "Design and Implementation of Motor-Based Rehabilitation Wearable Robot Hand System using 3D Printing," J. of the Korea Institute of Electronic Communication Sciences, vol. 16, no. 5, Oct. 2021, pp. 941-946.
  4. S. Kim, E. Kim, H. Kim, J. Nam, S. Lee, and S. Baek, "A study on the Improvement of Convenience through Reduction of Printing Time and Material Consumption of 3D Printer," J. of the Korea Institute of Electronic Communication Sciences, vol. 16, no. 5, Oct. 2021, pp. 909-916.
  5. H. Kim, "Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer," J. of the Korean society of Manufacturing Process Engineers, vol. 14, no. 6, Dec. 2015, pp. 63-68. https://doi.org/10.14775/ksmpe.2015.14.6.063
  6. C. Park, D. Kim, and E. Lee, "Standard Specimen Design, Fabrication and Precision Analysis for the Three Dimension Printer," In Proc. of the Korean Society of Manufacturing Technology Engineers(KSMTE), Jeju, Korea, Oct. 2015, pp. 100.
  7. Y. Kim, K. Kim, and C. Lee, "Accuracy Improvement of Output in Projection Stereolithography by Optimizing Projection Resolution," J. of the Korean Society of Manufacturing Technology Engineers, vol. 24, no. 6, 2015, pp. 710-717. https://doi.org/10.7735/ksmte.2015.24.6.710
  8. D. Jang, H. Lee, and J. Oh, "Design of IoT System for 3D Printer Multi-Management," J. of the Korea Institute of Electronic Communication Sciences, vol. 15, no. 4, Aug. 2020, pp. 759-764.
  9. S. Kim, E. Kim, H. Kim, J. Nam, S. Lee, and S. Baek, "A Study on the Improvement of Convenience through Reduction of Printing Time and Material Consumption of 3D Printer," J. of the Korea Institute of Electronic Communication Sciences, vol. 16, no. 5, Oct. 2021, pp. 909-916.
  10. K. Huh, Arduino who learns by Copying. Seoul: Hanbit Academy, 2013.
  11. H. Lim, S. Lee, S. Kim, and S. Choi, "Real-Time Power Quality Monitoring System using Bluetooth Module and Android App," In Proc. of the Institute of Electronics and Information Engineers, Jeju, Korea, June 2012, pp. 1618-1621.