DOI QR코드

DOI QR Code

Effect of Water-Containing Conditions on Concrete Substrates on Defects of Polyurethane-based Waterproofing Materials

콘크리트 바탕면의 함수조건이 폴리 우레탄계 방수재 하자에 미치는 영향

  • Lee, Gun-Cheol (Department of Architectural Engineering, Korea National University of Transportation) ;
  • Kim, Jae-Yeob (Department of Architectural Engineering, Korea National University of Transportation) ;
  • Kim, Young-Min (Department of Architectural Engineering, Korea National University of Transportation) ;
  • Hong, Sung-Rok (Construction Material Center, Korea Conformity Laboratories) ;
  • Kim, Young-Sam (Construction Material Center, Korea Conformity Laboratories) ;
  • Shin, Hong-Chol (Construction Material Center, Korea Conformity Laboratories)
  • Received : 2022.11.09
  • Accepted : 2023.01.02
  • Published : 2023.02.20

Abstract

This study is to analyze the cause of the defects in polyurethane waterproofing, a material commonly used on the roof of buildings, and to determine if it has a relation with the curing conditions of humidity and temperature and the moisture content of the base structure. As a result, it was confirmed that the waterproofing coating did not adhere when the moisture content of the base plate was 10% or more. When the temperature and humidity conditions were 20℃ and 80%RH, none of the properties deteriorate but when the temperature was 40℃, 60%RH, air bubbles were formed on the surface, and at 40℃ and 80%RH, the basic properties of the dry coating film were less than the KS F 3211 performance standard.

본 연구에서는 보편적으로 건물의 옥상 등에 사용되는 폴리 우레탄 방수재의 바탕구조물의 함수정도와 시공환경조건에 따른 하자원인을 분석하기 위한 것으로 바탕판의 함수조건에 따른 부착강도, 표면상태를 육안관찰하였고, 온도, 습도의 양생조건에 따라서 방수재 도막의 기계적 성능을 평가하였다. 실험결과 바탕판의 함수상태가 10%이상일 때 도막의 부착이 이뤄지지 않음을 확인하였고, 온습도 조건이 20℃, 80% RH일때는 기초물성이 모두 확보되었으나, 40℃, 60% RH일 때 표면에 기포가 관찰되었으며, 40℃, 80% RH일 때 건조도막 기초물성이 KS F 3211 성능기준이하로, 우레탄 방수재 도포에 있어 시공환경조건의 하자원인 중 바탕판의 함수조건 및 양생 시 절대습도가 중요한 요인임을 확인하였다.

Keywords

Acknowledgement

This research was supported by korea Institute for Advancement of Technology(KIAT) grant funded by the Korea Government(TOTIE)(P0008500, The Competency Development Program for Industry Specialist).

References

  1. Shin HJ. A Study on the defect causes type for poly-urethane waterproofing in roof. Journal of the Korea Institute of Construction Engineering and Management. 2005 Jun;6(3):128-34.
  2. Kim GR. A study on the prevention of defects for the roof waterproofing-focusing on urethane waterproofing [dissertation]. [Kunsan (korea)]: Kunsan National University; 2019. 83 p.
  3. Ko JS, Yun JW, Lee SB, Lee MW. Prevention technology for air pocket of membrane waterproofing in concrete structures. Magazine of the Korea Concrete Institute. 2007 Jul;19(4):59-65. https://doi.org/10.22636/MKCI.2007.19.4.59
  4. Korean construction specification, General waterproofing [Internet]. Goyang (Korea): Korea institute of civil engineering and building technology. 2021 - [cited 2021 Aug 13]. Available from: https://www.kcsc.re.kr/StandardCode/Viewer/40474/414001
  5. KS F 9003 : 2017 Standard coating method of liquid-applied waterproofing membrane [Internet] Eumseong (Korea): Korean Agency for Technology and Standards. 2017 - [cited 2017 Oct 31]. Available from: https://e-ks.kr/streamdocs/view/sd;streamdocsId=72059265886901342
  6. KS F 3211 : 2021 Waterproofing membrane coating for construction [Internet] Eumseong (Korea): Korean Agency for Technology and Standards. 2021 - [cited 2021 Jan 25]. Available from: https://e-ks.kr/streamdocs/view/sd;streamdocsId=72059205343666033
  7. KS F 9001: 2019 Standard coating method of epoxy resin paints for waterproof and anticorrosion of concretes structures [Internet]. Eumseong (Korea): Korean Agency for Technology and Standards. 2019 - [cited 2019 Dec 31]. Available from: https://e-ks.kr/streamdocs/view/sd;streamdocsId=72059198500814254
  8. Chae WB, Choi ES, Park SJ, Oh SK, Seo SK, A study on the performance evaluation of surface finishing material for parking slab mixed with cementitious powder component to polyurethane resin. Journal of the Architectural Institute of Korea Structure & Construction. 2011 Jan;27(1):111-28.