DOI QR코드

DOI QR Code

On compressive behavior of large welded hollow spherical joints with both internal and external stiffeners

  • Tingting Shu (Department of Civil Engineering, Zhejiang University) ;
  • Xian Xu (Department of Civil Engineering, Zhejiang University) ;
  • Yaozhi Luo (Department of Civil Engineering, Zhejiang University)
  • 투고 : 2022.02.28
  • 심사 : 2022.12.21
  • 발행 : 2023.01.25

초록

Welded hollow spherical joints are commonly used joints in space grid structures. An internal stiffener is generally adopted to strengthen the joints when large hollow spheres are used. To further strengthen it, external stiffeners can be used at the same time. In this study, axial compression tests are conducted on four full-scale 550 mm spherical joints. The failure modes and strengths of the tested joints are investigated. It shows that the external stiffeners are able to increase the strength of the joint up to 25%. A numerical model for large spherical joints with stiffeners is established and verified against the experimental results. Parametric studies are executed considering six main design factors using the verified model. It is found that the strength of the spherical joint increases as the thickness, height and number of the external stiffeners increase, and the hollow sphere's diameter has a neglectable effect on the enhancement caused by the external stiffeners. Based on the experimental and numerical results, a practical formula for the compressive bearing capacity of large welded hollow spherical joints with both internal and external stiffeners is proposed. The proposed formula gives a conservative prediction on the compressive capacity of large welded hollow spherical joints with both internal and external stiffeners.

키워드

과제정보

The research described in this paper was financially supported by the Natural Science Foundation of China (Grant No. 52178175) and a research grant from Center for Balance Architecture of Zhejiang University. The authors also thank Mr. Ru-Hao Wang, Si-Yuan Zhu, Tong-Hui Liang and Xiong-Jun Yang for their help in the implementation of the experiment.

참고문헌

  1. JG/T 11-2009 (2009), Welded Hollow Spherical Joint of Space Grid Structures, China Institute of Building Standard Design & Research, Beijing, China.
  2. JGJ7-2010 (2010), China Technical Specification for Space Frame Structures, China Academy of Building Research, Beijing, China.
  3. GB/T228.1-2010 (2010), Metallic Material-Tensile testing-Part 1: Method of Test at Room Temperature, Central Iron & Steel Research Institute; Beijing, China.
  4. GB 50661-2011 (2011), Code for Welding of Steel Structures, Central Research Institute of Building and Construction Co., LTD. MCC GROUP; Beijing, China.
  5. ANSYS (2018), ANSYS, I., v.19 1, Canonsburg, PA, USA.
  6. Chen, Y., Wang, J., Guo, Y., Guan, S., Yang, L. and Sun, B. (2019), "Mechanical behavior of welded hollow spherical joints with diameter exceeding 1.0 m", J. Construct. Steel Res., 159, 21-33. https://doi.org/10.1016/j.jcsr.2019.04.023.
  7. Feng, P., Qiang, H. and Ye, L. (2017), "Discussion and definition on yield points of materials, members and structures", Eng. Mech., 34(03), 36-46. https://doi.org/10.6052/j.issn.1000-4750.2016.03.0192
  8. Gao, F., Shao, Y.B. and Gho, W.M. (2007), "Stress and strain concentration factors of completely overlapped tubular joints under lap brace IPB load", J. Construct. Steel Res., 63(3), 305-316. https://doi.org/10.1016/j.jcsr.2006.05.007.
  9. Guo, Q., Xing, Y., Lei, H., Jiao, J. and Chen, Q. (2020), "Fatigue performance and life prediction methods research on steel tube-welded hollow spherical joint", Steel Compos. Struct., 36(1), 75-86. https://doi.org/10.12989/scs.2020.36.1.075.
  10. Han, Q. and Liu, X. (2004), "Ultimate bearing capacity of the welded hollow spherical joints in spatial reticulated structures", Eng. Struct., 26(1), 73-82. https://doi.org/10.1016/j.engstruct.2003.08.012.
  11. Han, Q., Liu, Y. and Xu, Y. (2016), "Stiffness characteristics of joints and influence on the stability of single-layer latticed domes", Thin Wall. Strruct., 107 514-525. https://doi.org/10.1016/j.tws.2016.07.013.
  12. Han, Q., Zhou, Q., Chen, Y. and Yu, B. (2007), "Ultimate bearing capacity of hollow spherical joints welded with circular pipes under eccentric loads", Trans. Tianjin Univ., 13(1), 28-34.
  13. Jiao, J., Lei, H. and Chen, Y.F. (2018), "Experimental study on variable-amplitude fatigue of welded cross plate-hollow sphere joints in grid structures", Adv. Mater. Sci. Eng., 2018, 1-15. https://doi.org/10.1155/2018/8431584.
  14. Lignos, D.G. and Krawinkler, H. (2011), "Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading", J. Struct. Eng., 137(11), 1291-1302. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000376.
  15. Liu, H., Ying, J., Chen, Z., Zhou, Y. and Yan, X. (2018), "Ultimate tensile and compressive performances of welded hollow spherical joints with H-beam", J. Construct. Steel Res., 150, 195-208. https://doi.org/10.1016/j.jcsr.2018.08.018.
  16. Soh, C.K., Fung, T.C., Qin, F. and Gho, W.M. (2001), "Behavior of completely overlapped tubular joints under cyclic loading", J. Struct. Eng.-ASCE., 127(2), 122-128. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(122).
  17. Wen, S., Liu, H., Chen, Z. and Ying, J. (2020), "Ultimate bearing behavior of H-beam welded hollow spheres under eccentric compression", Eng. Strcut., 212, 110522. https://doi.org/10.1016/j.engstruct.2020.110522.
  18. Xing, L. (2010), "Load-carrying capacity and practical design method of welded hollow spherical joints in space latticed structures", Adv. Steel Construct., 6(4), 976-1000. https://doi.org/10.18057/ijasc.2010.6.4.4.
  19. Xu, X., Shu, T., Zheng, J. and Luo, Y. (2022), "Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners", J. Construct. Steel Res., 188, 107034. https://doi.org/10.1016/j.jcsr.2021.107034.
  20. Xu, X., You, J., Wang, Y. and Luo, Y. (2023), "Analysis and assessment of life-cycle carbon emissions of space frame structures", J Clean Prod., https://doi.org/10.1016/j.jclepro.2022.135521.
  21. Xue, W. and Zhang, Q. (2009), "Influential parameter and experimental research on compressive bearing capacity of welded hollow spherical joints connected with circular steel tubes", Shanghai International Conference on Technology of Architecture and Structure, Shanghai, China.
  22. Yan, X., Duan, Y., Zhang, Y., Chen, Z. and Zhang, Q. (2020), "Study on compressive bearing capacity and axial stiffness of welded hollow spherical joints with H-shaped steel member", Eng. Struct., 203, 109821. https://doi.org/10.1016/j.engstruct.2019.109821.
  23. Yin, Y., Che, X., Li, Z., Li, J. and Han, Q. (2019), "Ductile fracture analysis of welded hollow spherical joints subjecting axial forces with micromechanical fracture models", Int. J. Steel Struct., 19(6), 2010-2023. https://doi.org/10.1007/s13296-019-00261-z.
  24. Zhao, Z., Zhu, H. and Chen, Z. (2016), "Mechanical behavior of single-layer reticulated shell connected by welded hollow spherical joints with considering welding residual stress", Weld World, 60(1), 61-69. https://doi.org/10.1007/s40194-015-0273-9.