Acknowledgement
본 연구는 2021년 양산부산대학교병원 임상연구비 지원으로 이루어졌음.
References
- Brocx S, Cleaver H. When and how to use a syringe driver in palliative care. Best Practice J. 2012;48:28-35.
- Kim GH, Yun SU, Ro JH, Nam KW. A new injection rate estimation technique for on-site screening test of medication infusion pump by nurses. P I Mech Eng H. 2020;234(4):370-6. https://doi.org/10.1177/0954411919894082
- Batliner M, Weiss M, Dual SA, Grass B, Meboldt M, Daners MS. Evaluation of a novel flow-controlled infusion pump for precise and continuous drug delivery at low flow rates: a laboratory study. Anaesthesia. 2019;74(11):1425-31. https://doi.org/10.1111/anae.14784
- Health Insurance Review & Assessment Service. Health insurance treatment statistics for inpatients in intensive care units. Healthcare Bigdata Hub. 2022 Oct. https://opendata.hira.or.kr/op/opc/selectOpenData.mo?sno=11913, accessed on Jan 10, 2023.
- Lin L, Vicente KJ, Doyle DJ. Patient safety, potential adverse drug events, and medical device design: a human factors engineering approach. J Biomed Inform. 2001;34(4):274-84. https://doi.org/10.1006/jbin.2001.1028
- Vicente KJ, Kada-Bekhaled K, Hillel G, Cassano A, Orser BA. Programming errors contribute to death from patient-controlled analgesia: case report and estimate of probability. Can J Anaesth. 2003;50(4):328-32. English, French. https://doi.org/10.1007/BF03021027
- Syed S, Paul JE, Hueftlein M, Kampf M, McLean RF. Morphine overdose from error propagation on an acute pain service. Can J Anaesth. 2006;53(6):586-90. https://doi.org/10.1007/BF03021849
- Park HJ, Jang JS. Establish Selection Process of Performance Management Medical Devices and Test items Based on Risk Management. Journal of Biomedical Engineering Research. 2019;28:40(1):20-31.
- International Electrotechnical Commission, IEC 60601-2-24: Medical electrical equipment-Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers, 2012;17-34.
- Batliner M, Weiss M, Dual SA, Grass B, Meboldt M, Schmid Daners M. Evaluation of a novel flow-controlled syringe infusion pump for precise and continuous drug delivery at low flow rates: a laboratory study. Anaesthesia. 2019;74(11):1425-1431. https://doi.org/10.1111/anae.14784
- AnJani AG, Sunarto PG, Royan R, Winowo KM, Romadhona G, Sapundani R, Mulyanto A, Setiawan I, Jumrianto J, Prasath N. Application of IoT using nodeMCU ESP8266 on the Syringe Pump Device to Increase Patient Safety. Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics. 2022;4(1):23-27. https://doi.org/10.35882/ijeeemi.v4i1.4
- Das S, Chakraborty B. A Pencil Drawn Capacitive Sensor used for Liquid Drug Volume Measurement in Syringe Pump. 2020 IEEE Applied Signal Processing Conference (ASPCON). 2020;85-88.
- Hagihghi R, Razmjou A, Orooji Y, Warkiani ME, Asadnia M. A miniaturized piezoresistive flow sensor for real-time monitoring of intravenous infusion. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2020;108(2):568-576. https://doi.org/10.1002/jbm.b.34412
- Shen Z, Kottapalli AGP, Subramaniam V, Asadnia M, Miao J, Triantafyllou M. Biomimetic flow sensors for biomedical flow sensing in intravenous tubes. 2016 IEEE SENSORS. 2016;1-3.
- Islam MR, Zahid Rusho R, Islam SMR. Design and Implementation of Low Cost Smart Syringe Pump for Telemedicine and Healthcare. 2019 International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST). 2019;440-444.
- Rajasekwaran S, Aishwarya SV, Gowtham S, Suguna R, Vasunthera V, Sathes S. Iot based low cost syringe pump for telemedicine and health care. International Research Journal of Modernization in Engineering Technology and Science. 2022;4(6):4222-4229.