Acknowledgement
본 연구는 한국생산기술연구원 기관주요사업 "Add-on 모듈 탑재를 통한 지능형 뿌리 공정 기술 개발(KITECH EO-23-0007)"의 지원으로 수행한 연구입니다.
References
- J.D. Kim and Y.M. Heo, "An Experimental Study of V-Ring Position on the Die Roll Height in the Fine Blanking of Special Part with Corner Shapes", Applied Mechanics and Materials, Vol. 184-185, pp. 49-54, 2021. https://doi.org/10.4028/www.scientific.net/AMM.184-185.49
- T.S. Kwak, Y.J. Kim and W.B. Bae, "Finite element analysis on the effect of die clearance on shear planes in fine blanking", J. Mater. Process. Technol, Vol. 130-131, No. pp. 462-468, 2002. https://doi.org/10.1016/S0924-0136(02)00767-7
- W.F. Fan and J.H. Li, "An investigation on the damage of AISI-1045 and AISI-1025 steels in fine-blanking with negative clearance", Mater. Sci. Eng. A, Vol.499, Issues. 1-2, pp. 248-251, 2009. https://doi.org/10.1016/j.msea.2007.11.108
- S. Thipprakmas, M. Jin and M. Murakawa, "An investigation of material flow analysis in fineblanking process.", J. Mater. Process. Technol, Vol. 192-193, pp. 237-242, 2007. https://doi.org/10.1016/j.jmatprotec.2007.04.065
- F. Klocke, K. Sweeney and H.-W. Raedt, "Improved tool design for fine blanking through the application of numerical modeling techniques", J. Mater. Process. Technol, Vol. 115, Issue. 1, pp. 70-75, 2001. https://doi.org/10.1016/S0924-0136(01)00771-3
- S. Thipprakmas, "Finite-element analysis of V-ring indenter mechanism in fine-blanking process", Materials & Design, Vol. 30, Issue. 3, pp. 526-531, 2009. https://doi.org/10.1016/j.matdes.2008.05.072
- T.S Kwak, Y.J Kim, M.K Seo, W.B Bae, "The effect of V-ring indenter on the sheared surface in the fine-blanking process of pawl", J. Mater. Process. Technol, Vol. 143-144, pp. 656-661, 2003. https://doi.org/10.1016/S0924-0136(03)00311-X
- Y. Liu, B. Tang, L. Hua, H. Mao, "Investigation of a novel modified die design for fine-blanking process to reduce the die-roll size", J. Mater. Process. Technol, Vol. 260, pp. 30-37, 2018. https://doi.org/10.1016/j.jmatprotec.2018.04.029
- Y. Liu, T, Cheng, L, Hua and H, Mao, "Research on the effect of ultrasonic vibration on the roll-over during the fine blanking process", J. Mech. Sci. Tech., Vol. 31, pp. 835-843, 2017. https://DOI10.1007/s12206-017-0135-z
- C. Luo, Z. Chen, K. Zhou, X. Yang, X. Zhang, "A novel method to significantly decrease the die roll during fine-blanking process with verification by simulation and experiments", J. Mater. Process. Technol, Vol. 250, pp. 254-260, 2017. https://doi.org/10.1016/j.jmatprotec.2017.07.024