한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제37권6호
  • /
  • Pages.273-281
  • /
  • 2023
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지
DOI QR코드

DOI QR Code

Structural Response Analysis for Multi-Linked Floating Offshore Structure Based on Fluid-Structure Coupled Analysis

  • Kichan Sim (Department of Ship & Ocean Engineering, University of Science & Technology) ;
  • Kangsu Lee (Department of Ship & Ocean Engineering, University of Science & Technology) ;
  • Byoung Wan Kim (Department of Ship & Ocean Engineering, University of Science & Technology)
  • 투고 : 2023.08.09
  • 심사 : 2023.10.18
  • 발행 : 2023.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, offshore structures for eco-friendly energy, such as wind and solar power, have been developed to address the problem of insufficient land space; in the case of energy generation, they are designed on a considerable scale. Therefore, the scalability of offshore structures is crucial. The Korea Research Institute of Ships & Ocean Engineering (KRISO) developed multi-linked floating offshore structures composed of floating bodies and connection beams for floating photovoltaic systems. Large-scale floating photovoltaic systems are mainly designed in a manner that expands through the connection between modules and demonstrates a difference in structural response with connection conditions. A fluid-structure coupled analysis was performed for the multi-linked floating offshore structures. First, the wave load acting on the multi-linked offshore floating structures was calculated through wave load analysis for various wave load conditions. The response amplitude operators (RAOs) for the motions and structural response of the unit structure were calculated by performing finite element analysis. The effects of connection conditions were analyzed through comparative studies of RAOs and the response's maximum magnitude and occurrence location. Hence, comparing the cases of a hinge connection affecting heave and pitch motions and a fixed connection, the maximum bending stress of the structure decreased by approximately 2.5 times, while the mooring tension increased by approximately 20%, confirmed to be the largest change in bending stress and mooring tension compared to fixed connection. Therefore, the change in structural response according to connection condition makes it possible to design a higher structural safety of the structural member through the hinge connection in the construction of a large-scale multi-linked floating offshore structure for large-scale photovoltaic systems in which some unit structures are connected. However, considering the tension of the mooring line increases, a safety evaluation of the mooring line must be performed.

키워드

과제정보

This research was supported by a grant from the Endowment Project of "Core Technology Development of Hydro-elasticity Based Structural Damage Assessment for Offshore Structures Considering Uncertainty (4/5)" funded by the Korea Research Institute of Ships and Ocean Engineering (PES4770).

참고문헌

  1. Chen, C., Duffour, P., Fromme, P., & Hua, X. (2021). Numerically efficient fatigue life prediction of offshore wind turbines using aerodynamic decoupling. Renewable Energy, 178, 1421-1434. https://doi.org/10.1016/j.renene.2021.06.115
  2. Ghigo, A., Faraggiana, E., Sirigu, M., Mattiazzo, G., & Bracco, G. (2022). Design and analysis of a floating photovoltaic system for offshore installation: The case study of Lampedusa. Energies, 15(23), 8804. https://doi.org/10.3390/en15238804
  3. Kim, H.-S., Kim, B. W., & Lee, K. (2022a). Parametric Study on Effect of Floating Breakwater for Offshore Photovoltaic System in Waves. Journal of the Computational Structural Engineering Institute of Korea, 35(2), 109-117. https://doi.org/10.7734/COSEIK.2022.35.2.109
  4. Kim, H., Min, E.-H., Heo, S., & Koo, W. C. (2022b). Motion Analysis of A Wind-Wave Energy TLP Platform Considering Second-order Wave Forces. Journal of Ocean Engineering and Technology, 36(6), 390-402. https://doi.org/10.26748/KSOE.2022.030
  5. Kim, B. W., Sung, H. G., Kim, J. H., & Hong, S. Y. (2013). Comparison of linear spring and nonlinear FEM methods in dynamic coupled analysis of floating structure and mooring system. Journal of Fluid & Structure, 42, 205-227. https://doi.org/10.1016/j.jfluidstructs.2013.07.002
  6. Kim, H.-S. (2023). Efficient wave load calculation methods for estimating structural responses of highly numerous floating bodies with connection beams [Doctoral dissertation, University of Science & Technology].
  7. Na, K. W., Choo, J. H., & Lee, B. J. (2021). Field performance test of unit platform development for offshore floating photovoltaic power structure. New & Renewable Energy, 17(3), 16-23. https://doi.org/10.7849/ksnre.2021.0012
  8. Park, S., & Choung, J. (2023). Structural design of the substructure of a 10 MW floating offshore wind turbine system using dominant load parameter. Journal of Marine Science and Engineering, 11(5), 1048. https://doi.org/10.3390/jmse11051048
  9. Song, J.-S., Rim, C. -W., Moon, S.-J. & Nam, Y.-Y. (2014). Effect of initial conditions on transient response in dynamic simulation of FOWT. Journal of Ocean Engineering and Technology, 28(4), 288-293. https://doi.org/10.5574/KSOE.2014.28.4.288
  10. Yoon, D. H. & Choung, J. (2023). Collision simulation of a floating offshore wind turbine considering ductile fracture and hydrodynamics using hydrodynamic plug-in HydroQus. Journal of Ocean Engineering and Technology, 37(3), 111-121. https://doi.org/10.26748/KSOE.2023.004