DOI QR코드

DOI QR Code

Stator flux oriented sensorless DTFC for IPMSMs using pseudo-random HF signal injection

  • Junlei Chen (School of Electrical Engineering, Southeast University) ;
  • Xiang Wu (School of Electrical Engineering, China University of Mining and Technology)
  • Received : 2023.03.19
  • Accepted : 2023.07.25
  • Published : 2023.12.20

Abstract

In this article, a stator flux oriented sensorless control method is proposed for interior permanent magnet synchronous motor (IPMSM) drives based on the direct torque and flux control (DTFC) and pseudo-random high-frequency signal injection (PR-HFSI) in the zero-low speed range. The DTFC for IPMSMs is introduced briefly and the conventional high-frequency signal injection (HFSI) method, which requires an additional transformation, is also introduced. Then the stator flux oriented PR-HFSI is proposed comprising injection mode and rotor observation, with the aim of noise reduction and easy implementation. Furthermore, the high-frequency noise in HFSI and the mechanisms of noise suppression in PR-HFSI are analyzed based on current spectrums. Meanwhile, the optimal noise reduction frequency combination of n kinds frequency injections is also analyzed. Finally, the performance of the proposed stator flux oriented PR-HFSI method is confirmed with experiments on a 60 kW IPMSM test bench.

Keywords

Acknowledgement

National Natural Science Foundation of China, 52007190, Xiang Wu

References

  1. Mohammed, S., Lee, K.B.: Improved adaptive iterative learning current control approach for IPMSM drive. J Power Electron 23, 284-295 (2023) https://doi.org/10.1007/s43236-022-00581-0
  2. Zhong, L., Rahman, M.F., Hu, W.Y., Lim, K.W.: Analysis of direct torque control in permanent magnet synchronous motor drives. IEEE Trans. Power Electron. 12(3), 528-536 (1997) https://doi.org/10.1109/63.575680
  3. Li, C., Shi, T., Yan, Y., Zhou, Z., Xia, C.: Predictive control with optimal vector sequence for permanent magnet synchronous motors. J Power Electron 20, 553-565 (2020) https://doi.org/10.1007/s43236-020-00039-1
  4. Liu, P., Liu, D., Shen, Y., Liu, A., Yang, X., Zhao, J.: Full speed range position-sensorless compound control scheme for PMSMs. J Power Electron 22, 1302-1312 (2022) https://doi.org/10.1007/s43236-022-00441-x
  5. Chen, J., Fan, Y., Wang, W., Lee, C.H.T., Wang, Y.: Sensorless control for SynRM drives using a pseudo-random high-frequency triangular-wave current signal injection scheme. IEEE Trans. Power Electron. 37(6), 7122-7131 (2022) https://doi.org/10.1109/TPEL.2022.3140829
  6. Yu, K., Wang, Z.: Position sensorless control of ipmsm using adjustable frequency setting square-wave voltage injection. IEEE Trans. Power Electron. 37(11), 12973-12979 (2022) https://doi.org/10.1109/TPEL.2022.3179611
  7. P. Landsmann, D. Paulus, A. Dotlinger, R Kennel, (2013) Silent injection for saliency based sensorless control by means of current oversampling. presented at the 2013 IEEE International Conference on Industrial Technology (ICIT).
  8. Ma, Z., Gao, J., Kennel, R.: FPGA implementation of a hybrid sensorless control of SMPMSM in the whole speed range. IEEE Trans. Industr. Inf. 9(3), 1253-1261 (2013) https://doi.org/10.1109/TII.2012.2221132
  9. Kim, S., Ha, J.-I., Sul, S.-K.: PWM switching frequency signal injection sensorless method in IPMSM. IEEE Trans. Ind. Appl. 48(5), 1576-1587 (2012) https://doi.org/10.1109/TIA.2012.2210175
  10. Basic, D., Malrait, F., Rouchon, P.: Current controller for low-frequency signal injection and rotor flux position tracking at low speeds. IEEE Trans. Industr. Electron. 58(9), 4010-4022 (2011) https://doi.org/10.1109/TIE.2010.2100336
  11. Tse, K.K., Chung, H.S.H., Huo, S.Y., So, H.C.: Analysis and spectral characteristics of a spread-spectrum technique for conducted EMI suppression. IEEE Trans. Power Electron. 15(2), 399-410 (2000) https://doi.org/10.1109/63.838113
  12. Boudoudaa, A., Boudjerdaa, N., Drissib, K.E.K., Kerroumb, K.: Spread spectrum in full bridge DC-DC/DC-AC converter by optimized dual RPWM scheme. The Mediterranean J Electron Communications 10(1), 666-673 (2014)
  13. T. Shun, Y. Kazuya, and Y. Kazuaki. Noise Reduction Method by Injected Frequency Control for Position Sensorless Control of Permanent Magnet Synchronous Motor. presented at the The 2014 International Power Electronics Conference, (2014).
  14. J. Hui and S. Mark. Sensorless torque control of a PM motor using modified HF injection method for audible noise reduction. presented at the European Conference on Power Electronics and Applications, (2011).
  15. Wang, G., Yang, L., Yuan, B., Wang, B., Zhang, G., Xu, D.: Pseudo-random high-frequency square-wave voltage injection based sensorless control of IPMSM drives for audible noise reduction. IEEE Trans. Industr. Electron. 63(12), 7423-7433 (2016) https://doi.org/10.1109/TIE.2016.2594171
  16. Chen, J., Wu, X., Chen, S., Tan, G.: Sensorless flux adaption DTFC of an IPMSM based on an active flux-based MTPA and an adaptive second-order sliding mode observer. IET Power Electronics 13(9), 1875-1884 (2020) https://doi.org/10.1049/iet-pel.2019.1242