DOI QR코드

DOI QR Code

Energy harvesting from conducted electromagnetic interference of fluorescent light for Internet of Things application

  • Hyoung, Chang-Hee (Telecommunications and Media Research Laboratory, Electronics and Telecommunications Research Institute) ;
  • Hwang, Jung-Hwan (Telecommunications and Media Research Laboratory, Electronics and Telecommunications Research Institute)
  • Received : 2021.07.21
  • Accepted : 2022.02.05
  • Published : 2022.10.10

Abstract

A novel energy harvesting technique that uses conducted electromagnetic interference as an energy source is presented. Conducted EMI generated from fluorescent light using a switched-mode power supply was measured and modeled as an equivalent voltage source. Two types of rectifier circuits-a bridge rectifier and a voltage doubler-were used as the harvesting devices for conducted EMI source. The matching networks were designed based on the equivalent model, and the harvested power was improved. The implemented energy harvester produces a regulated power over 68.9 mW and current over 15.1 mA while a regulated voltage can be selected between 3.3 V and 5 V. The proposed system shows the highest harvesting power indoor environment and can provide enough power for the Internet of Things devices.

Keywords

Acknowledgement

This work was supported by Institute of Information and Communications Technology Planning and Evaluation (IITP) grant funded by the Korea government (MSIT) (2021-0-00103, "Research and development of technologies for utilization of THz frequency band and evaluation of electromagnetic safety").

References

  1. O. B. Akan, O. Cetinkaya, C. Koca, and M. Ozger, Internet of hybrid energy harvesting things, IEEE Internet Things J. 5 (2018), no. 2, 736-746. https://doi.org/10.1109/JIOT.2017.2742663
  2. S. Zeadally, F. K. Shaikh, A. Talpur, and Q. Z. Sheng, Design architectures for energy harvesting in the Internet of Things, Renew, Sustain. Energy Rev. 128 (2020), no. 2, 736-746.
  3. Y. K. Tan and S. K. Panda, Energy harvesting from hybrid indoor ambient light and thermal energy sources for enhanced performance of wireless sensor nodes, IEEE Trans. Ind. Electron. 58 (2011), no. 9, 4424-4435. https://doi.org/10.1109/TIE.2010.2102321
  4. H. Lhermet, C. Condemine, M. Plissonnier, R. E. Salot, P. Audebert, and M. Rosset, Efficient power management circuit: From thermal energy harvesting to above-IC microbattery energy storage, IEEE J. Solid-State Circuits 43 (2008), no. 1, 246-255. https://doi.org/10.1109/JSSC.2007.914725
  5. N. J. Guilar, R. Amirtharajah, P. J. Hurst, and S. H. Lewis, An energy-aware multiple-input power supply with charge recovery for energy harvesting applications, (IEEE International Solid-State Circuits Conference - Digest of Technical Papers, San Francisco, CA, USA), Feb. 2009. https://doi.org/10.1109/ISSCC.2009.4977426
  6. S. Bandyopadhyay and A. P. Chandrakasan, Platform architecture for solar, thermal, and vibration energy combining with MPPT and single inductor, IEEE J. Solid-State Circuits 47 (2012), no. 9, 2199-2215. https://doi.org/10.1109/JSSC.2012.2197239
  7. A. Nasiri, S. A. Zabalawi, and G. Mandic, Indoor power harvesting using photovoltaic cells for low-power applications, IEEE Trans. Ind. Electron. 56 (2009), no. 11, 4502-4509. https://doi.org/10.1109/TIE.2009.2020703
  8. D. Pubill, J. Serra, and C. Verikoukis, Harvesting artificial light indoors to power perpetually a wireless sensor network node, (IEEE 23rd International Workshop on Computer Aided Modeling and Design of Communication Links and Network, Barcelona, Spain), Sept. 2018. https://doi.org/10.1109/CAMAD.2018.8514995
  9. K. Geissdoerfer, F. Schmidt, and B. Kusy, Demo abstract: Bootstrapping batteryless networks using fluorescent light properties, (ACM/IEEE International Conference on Information Processing in Sensor Networks, Sydney, Australia), Apr. 2020. https://doi.org/10.1109/IPSN48710.2020.000-8
  10. C. H. Hyoung, J. H. Hwang, J. H. Lee, S. W. Kang, and Y. T. Kim, Energy harvesting from electromagnetic interference induced in the human body, Electron. Lett. 52 (2016), no. 22, 1881-1883. https://doi.org/10.1049/el.2016.3049
  11. G. Monti, P. Arcuti, F. Congedo, and L. Tarricone, Power generation by spurious emissions from compact fluorescent lamps, (44th European Microwave Conference, Ome, Italy), Oct. 2014. https://doi.org/10.1109/EuMC.2014.6986550
  12. O. Cetinkaya and O. B. Akan, Electric-field energy harvesting from lighting elements for battery-less Internet of Things, IEEE Access 5 (2017), 7423-7434. https://doi.org/10.1109/ACCESS.2017.2690968
  13. J. Hou, S. Wang, S. Zhang, Q. She, Y. Zhu, and C. Li, Design and application of a CT-based high-reliability energy harvesting circuit for monitoring sensors in power system, IEEE Access 7 (2019), 149039-149051. https://doi.org/10.1109/ACCESS.2019.2946325
  14. F. Yang, L. Du, H. Yu, and P. Huang, Magnetic and electric energy harvesting technologies in power grids: A review, Sensors 20 (2020), no. 5, 1496. https://doi.org/10.3390/s20051496
  15. F. Giezendanner, J. Biela, J. W. Kolar, and S. Zudrell-Koch, EMI noise prediction for electronic ballasts, IEEE Trans. Power Electron. 25 (2010), no. 8, 2133-2141. https://doi.org/10.1109/TPEL.2010.2046424
  16. EN 55015, Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment, CENELEC, Brussels, Belgium, 2006.
  17. L. C. Long, W. E. Sayed, V. Munesswaran, N. Moonen, R. Smolenski, and P. Lezynski, Assessment of conducted emission for multiple compact fluorescent lamps in various grid topology, Electronics 10 (2021), no. 18, 2258. https://doi.org/10.3390/electronics10182258
  18. B. Merabet, F. Costa, H. Takhedmit, C. Vollaire, B. Allard, L. Cirio, and O. Picon, A 2.45-GHz localized elements rectenna, microwave, antenna, (3rd IEEE International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications, Beijing, China), Oct. 2009. https://doi.org/10.1109/MAPE.2009.5355628
  19. T. Le, J. Han, A. Von Jouanne, K. Mayararn, and T. S. Fiez, Piezo-electric power generation interface circuits, (Proceedings of the IEEE 2003 Custom Integrated Circuits Conference, San Jose, CA, USA), Sept. 2003. https://doi.org/10.1109/CICC.2003.1249447
  20. S. Keyrouz, H. J. Visser, and A. G. Tijhuis, Multi-band simultaneous radio frequency energy harvesting, (7th European Conference on Antennas and Propagation, Gothenburg, Sweden), Apr. 2013.
  21. Avago Technologies, HSMS-280x. Available from: http://www.avagotech.com/docs/AV02-0533EN
  22. Coilcraft, LPS6235. Available from: https://www.coilcraft.com/en-us/products/power/shielded-inductors/ferrite-drum/lps/lps6235/
  23. S. Keyrouz, H. Pflug, and H. Visser, Input impedance calculation of a multi-stage rectifier circuit, (IEEE Wireless Power Transfer Conference, London, UK), June 2019. https://doi.org/10.1109/WPTC45513.2019.9055683
  24. Linear Technology, LTC3632. Available from: http://www.linear.com/product/LTC3632
  25. Z. Wu, Y. Wen, and P. Li, A power supply of self-powered online monitoring systems for power cords, IEEE Trans. Energy Convers. 28 (2013), no. 4, 921-928. https://doi.org/10.1109/TEC.2013.2281075
  26. J. Moon, J. Donnal, J. Paris, and S. B. Leeb, VAMPIRE: A magnetically self-powered sensor node capable of wireless transmission, (Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition, Long Beach, CA, USA), Mar. 2013. https://doi.org/10.1109/APEC.2013.6520751