과제정보
This study was supported by 2021 Academic Research Support Program in Gangneung-Wonju National University.
참고문헌
- Galante R, Figueiredo-Pina CG, Serro AP. Additive manufacturing of ceramics for dental applications: A review. Dent Mater 2019;35:825-46. https://doi.org/10.1016/j.dental.2019.02.026
- Hull CW. Apparatus for production of three dimensional objects by stereolithography. US-6027324-A, 2000.
- Methani MM, Revilla-Leon M, Zandinejad A. The potential of additive manufacturing technologies and their processing parameters for the fabrication of all-ceramic crowns: A review. J Esthet Restor Dent 2020;32:182-92. https://doi.org/10.1111/jerd.12535
- ASTM F2792-12A. Standard terminology for additive manufacturing technologies. West Conshohocken, PA: ASTM International; 2012.
- Azari A, Nikzad S. The evolution of rapid prototyping in dentistry: a review. Rapid Prototyp J 2009;15:216-25. https://doi.org/10.1108/13552540910961946
- Jockusch J, Ozcan M. Additive manufacturing of dental polymers: An overview on processes, materials and applications. Dent Mater J 2020;39:345-54. https://doi.org/10.4012/dmj.2019-123
- Li H, Song L, Sun J, Ma J, Shen Z. Stereolithography-fabricated zirconia dental prostheses: concerns based on clinical requirements. Adv Appl Ceram 2020;119:236-43. https://doi.org/10.1080/17436753.2019.1709687
- Chartier T, Chaput C, Doreau F, Loiseau M. Stereolithography of structural complex ceramic parts. J Mater Sci 2002;37:3141-7. https://doi.org/10.1023/A:1016102210277
- Furtado de Mendonca A, Shahmoradi M, Gouvea CVD, De Souza GM, Ellakwa A. Microstructural and mechanical characterization of CAD/CAM materials for monolithic dental restorations. J Prosthodont 2019;28:e587-e594. https://doi.org/10.1111/jopr.12964
- Guilardi L, Soares P, Werner A, de Jager N, Pereira G, Kleverlaan C. Fatigue performance of distinct CAD/CAM dental ceramics. J Mech Behav Biomed Mater 2020;103:103540. https://doi.org/10.1016/j.jmbbm.2019.103540
- El Zhawi H, Kaizer MR, Chughtai A, Moraes RR, Zhang Y. Polymer infiltrated ceramic network structures for resistance to fatigue fracture and wear. Dent Mater 2016;32:1352-61. https://doi.org/10.1016/j.dental.2016.08.216
- Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26. https://doi.org/10.1016/j.dental.2013.01.002
- Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, Finger WJ, Arksornnukit M. Mechanical properties of composite resin blocks for CAD/ CAM. Dent Mater J 2014;33:705-10. https://doi.org/10.4012/dmj.2014-208
- Branco AC, Silva R, Santos T, Jorge H, Rodrigues AR, Fernandes R. Suitability of 3D printed pieces of nanocrystalline zirconia for dental applications. Dent Mater 2020;36:442-55. https://doi.org/10.1016/j.dental.2020.01.006
- Baumgartner S, Gmeiner R, Schonherr JA, Stampfl J. Stereolithography-based additive manufacturing of lithium disilicate glass ceramic for dental applications. Mater Sci Eng C Mater Biol Appl 2020;116:111180. https://doi.org/10.1016/j.msec.2020.111180
- ISO 20795-1. Dentistry-Base polymers-Part 1: Denture base polymers. 2nd ed. International Standard Organization (ISO); Geneva; Switzerland, 2013.
- Al-Dwairi ZN, Tahboub KY, Baba NZ, Goodacre CJ. A Comparison of the flexural and impact strengths and flexural modulus of CAD/CAM and conventional heatcured polymethyl methacrylate (PMMA). J Prosthodont 2020;29:341-9. https://doi.org/10.1111/jopr.12926
- Dehurtevent M, Robberecht L, Hornez JC, Thuault A, Deveaux E, Behin P. Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing. Dent Mater 2017;33:477-85. https://doi.org/10.1016/j.dental.2017.01.018
- Johansson E, Lidstrom O, Johansson J, Lyckfeldt O, Adolfsson E. Influence of resin composition on the defect formation in alumina manufactured by stereolithography. Materials (Basel) 2017;10:138. https://doi.org/10.3390/ma10020138
- Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9. https://doi.org/10.1016/j.dental.2014.02.019
- Ilie N, Hickel R, Valceanu AS, Huth KC. Fracture toughness of dental restorative materials. Clin Oral Investig 2012;16:489-98. https://doi.org/10.1007/s00784-011-0525-z
- Hampe R, Theelke B, Lumkemann N, Eichberger M, Stawarczyk B. Fracture toughness analysis of ceramic and resin composite CAD/CAM material. Oper Dent 2019;44:E190-201. https://doi.org/10.2341/18-161-L
- Wang H, Cui B, Li J, Li S, Lin Y, Liu D. Mechanical properties and biocompatibility of polymer infiltrated sodium aluminum silicate restorative composites. J Adv Ceram 2017;6:73-9. https://doi.org/10.1007/s40145-016-0214-0
- Fischer H, Waindich A, Telle R. Influence of preparation of ceramic SEVNB specimens on fracture toughness testing results. Dent Mater 2008;24:618-22. https://doi.org/10.1016/j.dental.2007.06.021
- Swain MV, Coldea A, Bilkhair A, Guess PC. Interpenetrating network ceramic-resin composite dental restorative materials. Dent Mater 2016;32:34-42. https://doi.org/10.1016/j.dental.2015.09.009
- Kruzic JJ, Arsecularatne JA, Tanaka CB, Hoffman MJ, Cesar PF. Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics. J Mech Behav Biomed Mater 2018;88:504-33. https://doi.org/10.1016/j.jmbbm.2018.08.008
- Sun C, Xu D, Hou C, Zhang H, Li Y, Zhang Q, Wang H, Zhu M. Core-shell structured SiO2@ZrO2@SiO2 filler for radiopacity and ultra-low shrinkage dental composite resins. J Mech Behav Biomed Mater 2021;121:104593. https://doi.org/10.1016/j.jmbbm.2021.104593
- Wang Z, Chiang MYM. System compliance dictates the effect of composite filler content on polymerization shrinkage stress. Dent Mater 2016;32:551-60. https://doi.org/10.1016/j.dental.2016.01.006
- Digholkar S, Madhav VN, Palaskar J. Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods. J Indian Prosthodont Soc 2016;16:328-34. https://doi.org/10.4103/0972-4052.191288