DOI QR코드

DOI QR Code

Hysteretic performance of the all-steel buckling-restrained brace with LY315 steel core

  • Wei, Xuan (The Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology) ;
  • Yang, Lu (The Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology) ;
  • Chen, Yohchia Frank (School of Civil Engineering, Chongqing University) ;
  • Wang, Meng (School of Civil Engineering, Beijing Jiaotong University)
  • 투고 : 2020.12.23
  • 심사 : 2022.09.16
  • 발행 : 2022.09.25

초록

To study the seismic performance of the all-steel buckling-restrained brace (BRB) using the novel soft steel LY315 for core member, a total of three identical BRBs were designed and a series of experimental and numerical studies were conducted. First, monotonic and cyclic loading tests were carried out to obtain the mechanical properties of LY315 steel. In addition, the parameters of the Chaboche model were calibrated based on the test results and then verified using ABAQUS. Second, three BRB specimens were tested under cyclic loads to investigate the seismic performance. The failure modes of all the specimens were identified and discussed. The test results indicate that the BRBs exhibit excellent energy dissipation capacity, good ductility, and excellent low-cycle fatigue performance. Then, a finite element (FE) model was established and verified with the test results. Furthermore, a parametric study was performed to further investigate the effects of gap size, restraining ratio, slenderness ratio of the yielding segment, and material properties of the core member on the load capacity and energy dissipation capacity of BRBs.

키워드

과제정보

This work was supported by National Natural Science Foundation of China (Grant No. 51922001), and the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 51421005).

참고문헌

  1. ABAQUS. Standard user's manual version 6.10. Pawtucket, RI: Hibbitt, Karlsson & Sorensen, Inc.; 2010.
  2. AISC, Seismic provisions for structural steel buildings, Chicago, 2010.
  3. Ariyaratana, C. and Fahnestock, L.A. (2011), "Evaluation of buckling-restrained braced frame seismic performance considering reserve strength", Eng Struct. 33(1), 77-89. https://doi.org/10.1016/j.engstruct.2010.09.020
  4. Beiraghi, H. (2018), "Energy demands in reinforced concrete wall piers coupled by buckling restrained braces subjected to nearfault earthquake", Steel Compos Struct. 27(6), 703-716. https://doi.org/10.12989/scs.2018.27.6.703
  5. Beiraghi, H. (2019), "Fragility assessment of shear walls coupled with buckling restrained braces subjected to near-field earthquakes", Steel Compos Struct. 33(3), 389-402. https://doi.org/10.12989/scs.2019.33.3.389
  6. Black, C.J., Makris, N. and Aiken, I.D. (2004), "Component testing, seismic evaluation and characterization of bucklingrestrained braces", J Struct Eng-Asce. 130(6), 880-894. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(880)
  7. Cahis, X., Simon, E., Piedrafita, D. and Catalan, A. (2018), "Core behavior and low-cycle fatigue estimation of the Perforated Core Buckling-Restrained Brace", Eng Struct. 174 126-138. https://doi.org/10.1016/j.engstruct.2018.07.044
  8. Chaboche, J.L. (1986), "Time-Independent Constitutive Theories for Cyclic Plasticity", Int J Plasticity. 2(2), 149-188. https://doi.org/10.1016/0749-6419(86)90010-0
  9. Chen, J.L., Shu, W.Y., Li, J.W. (2016), "Experimental study on dynamic mechanical property of Q235 steel at different strain rates", J Tongji University. 44(7), 2071-2075. (In Chinese)
  10. Chou, C.C. and Chen, S.Y. (2010), "Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces", Eng Struct. 32(8), 2108-2121. https://doi.org/10.1016/j.engstruct.2010.03.014
  11. Dusicka, P. and Tinker, J. (2013), "Global Restraint in UltraLightweight Buckling-Restrained Braces", J Compos Constr. 17(1), 139-150. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000320
  12. Eatherton, M.R., Fahnestock, L.A. and Miller, D.J. (2014), "Computational study of self-centering buckling-restrained braced frame seismic performance", Earthq Eng Struct D. 43(13), 1897-1914. https://doi.org/10.1002/eqe.2428
  13. Guo, Y.L., Tong, J.Z., Wang, X.A. and Zhou, P. (2018), "Subassemblage tests and design of steel channels assembled buckling-restrained braces", B Earthq Eng. 16(9), 4191-4224. https://doi.org/10.1007/s10518-018-0337-5
  14. Hadianfard, M.A., Eskandari, F. and JavidSharifi, B. (2018), "The effects of beam-column connections on behavior of bucklingrestrained braced frames", Steel Compos Struct. 28(3), 309-318. https://doi.org/10.12989/scs.2018.28.3.309
  15. JGJ297-2013, Technical specification for seismic energy dissipation of buildings, China Architecture & Building Press, Beijing, 2013 (In Chinese).
  16. JGJ99-2015, Technical specification for steel structure of tall buildings, China Architecture & Building Press, Beijing, (In Chinese).
  17. Jia, L.J., Ge, H.B., Xiang, P. and Liu, Y. (2018a), "Seismic performance of fish-bone shaped buckling-restrained braces with controlled damage process", Eng Struct. 169 141-153. https://doi.org/10.1016/j.engstruct.2018.05.040
  18. Jia, L.J., Li, R.W., Xiang, P., Zhou, D.Y. and Dong, Y. (2018b), "Resilient steel frames installed with self-centering dual-steel buckling-restrained brace", J Constr Steel Res. 149 95-104. https://doi.org/10.1016/j.jcsr.2018.07.001
  19. Kim, S.H. and Choi, S.M. (2015), "Structural behavior of inverted V-braced frames reinforced with non-welded buckling restrained braces", Steel Compos Struct. 19(6), 1581-1598. https://doi.org/10.12989/scs.2015.19.6.1581
  20. Razavi, S.A., Kianmehr, A., Hosseini, A. and Mirghaderi, S.R. (2018), "Buckling-restrained brace with CFRP encasing: Mechanical behavior & cyclic response", Steel Compos Struct. 27(6), 675-689. https://doi.org/10.12989/scs.2018.27.6.675
  21. Shi, G., Gao, Y., Wang, X. and Zhang, Y. (2018), "Mechanical properties and constitutive models of low yield point steels", Constr Build Mater. 175 570-587. https://doi.org/10.1016/j.conbuildmat.2018.04.219
  22. Shi, Q.X., Wang, F., Wang, P. and Chen, K. (2018), "Experimental and numerical study of the seismic performance of an all-steel assembled Q195 low-yield buckling-restrained brace", Eng Struct. 176 481-499. https://doi.org/10.1016/j.engstruct.2018.09.039
  23. Shin, J., Lee, K., Jeong, S.H., Lee, H.S. and Kim, J. (2012), "Experimental and Analytical Studies on Buckling-Restrained Knee Bracing Systems with Channel Sections", Int J Steel Struct. 12(1), 93-106. https://doi.org/10.1007/s13296-012-1009-Y
  24. Tong, J.Z. and Guo, Y.L. (2018), "Numerical investigations on elastic buckling and hysteretic behavior of steel angles assembled buckling-restrained braces", J Constr Steel Res. 144 21-39. https://doi.org/10.1016/j.jcsr.2018.01.015
  25. Usami, T., Wang, C.L. and Funayama, J. (2012), "Developing high-performance aluminum alloy buckling-restrained braces based on series of low-cycle fatigue tests", Earthq Eng Struct D. 41(4), 643-661. https://doi.org/10.1002/eqe.1149
  26. Wang, H.S., Nie, X. and Pan, P. (2017), "Development of a selfcentering buckling restrained brace using cross-anchored prestressed steel strands", J Constr Steel Res. 138 621-632. https://doi.org/10.1016/j.jcsr.2017.07.017
  27. Wu, A.C., Lin, P.C. and Tsai, K.C. (2014), "High-mode buckling responses of buckling-restrained brace core plates", Earthq Eng Struct D. 43(3), 375-393. https://doi.org/10.1002/eqe.2349
  28. Xie, Q. (2005), "State of the art of buckling-re strained braces in Asia", J Constr Steel Res. 61(6), 727-748. https://doi.org/10.1016/j.jcsr.2004.11.005
  29. Xu, F., Chen, J., Shu, K. and Su, M.N. (2018), "Cyclic behaviour of double-tube buckling-restrained braces for boiler steel plant structures", J Constr Steel Res. 150 556-569. https://doi.org/10.1016/j.jcsr.2018.08.022
  30. Yan, H., Pan, P., Wang, Y.Q., Makino, T. and Qi, X. (2012), "Tests of Buckling-Restrained Braces Using Low-yield point Steel as Core Material", Appl Mech Mater. 166-169 3159-+. https://doi.org/10.4028/www.scientific.net/AMM.166-169.3159
  31. Yang, L., Wang, M., Sun, Y., Li, Z.L. and Li, Y.J. (2020), "Experimental and numerical study of LY315 steel moment connection with bolted cover plates", Thin-Walled Struct. 159 107277. https://doi.org/10.1016/j.tws.2020.107277
  32. Zhang, D.B., Nie, X., Pan, P., Wang, M.Z., Deng, K.L. and Chen, Y.B. (2016), "Experimental study and finite element analysis of a buckling-restrained brace consisting of three steel tubes with slotted holes in the middle tube", J Constr Steel Res. 124 1-11. https://doi.org/10.1016/j.jcsr.2016.05.003