DOI QR코드

DOI QR Code

보일러 급수펌프용 1500lb 고차압 제어밸브 국산화 개발에 관한 연구

A Study on the Localization of 1500lb High-Pressure Drop Control Valve for Boiler Feedwater Pump

  • 이권일 (경상국립대학교 대학원) ;
  • 장훈 ((주)TES) ;
  • 이치우 (경상국립대학교 자동차공학과)
  • Lee, Kwon-Il (Graduate School of Gyeongsang National University) ;
  • Jang, Hoon (Total Engineering Solution) ;
  • Lee, Chi-Woo (Department of Automotive Engineering, Gyeongsang National University)
  • 투고 : 2022.05.27
  • 심사 : 2022.07.25
  • 발행 : 2022.08.31

초록

We developed a prototype from the design of a trim, which is the most important in the localization development of a 1500 Ib high-differential pressure-control valve used for boiler feedwater, and measured the flow coefficient, the most basic design data for valves. The following conclusions were drawn. The comparison of the design values of the flow coefficients for the existing X-trim and the multicore trim designed for localization development showed that they were almost identical, and the X-trim value was slightly lower. The comparison of the X-trim and multicore trim based on the valve flow coefficient test showed that they were generally similar, indicating no problem with the design. In the future, we plan to compare and analyze the flow paths for the X-trim and multicore trim via flow analysis.

키워드

참고문헌

  1. Kang, C. W., Yi, C. S., Jang, S. M., Lee, C. W., "A Study of the Measurement of the Flow Coefficient Cv of a Ball Valve for Instrumentation", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18 No. 3, pp. 103~108, 2019. https://doi.org/10.14775/ksmpe.2019.18.3.103
  2. Byeon, J. U., Kim, C. H., Park, S. H., Lee, M. W., Kang, M. C., "Effects of Flow Rate and Discharge Pressure with Compressing Spring in Non-diaphragm Type Stem of Water Pressure Reducing Valve", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 5, pp. 103~109, 2019.
  3. Kang, C. W., Yi, C. S., Lee, C. W., "Experiment and Flow Analysis of the Flow Coefficient Cv of a 1 inch Ball Valve for a Thermal Power Plant", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 3, pp. 109~115, 2019. https://doi.org/10.14775/ksmpe.2019.18.3.109
  4. Jeong, H. S., Nam, J. W., "Experimental Analysis of the Static and Dynamic Characteristics for a Pilot Proportional Pressure Control Valve" Proceedings of KSPE Autumn Conference, Vol. 8, No. 4, pp. 9-16, 2011.
  5. Lee, J. H. and Sung, J. K., "A Comparative Study on the Improvement of the Performance of Swivel Valve Tube Couplers," Journal of Korean Society of Manufacturing Process Engineers, Vol. 9, No. 5, pp. 20-27, 2010.
  6. Kim, J. W., "Safety Estimation of High Pressure Drop Control Valve for Offshore Structures", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20, No. 5, pp. 553-558, 2011.
  7. Ahn, Y. J., Kim, B. J. and Shin, B. R., "Numerical Analysis on Flow Characteristics of High Pressure Drop Control Valve with Anti-Cavitation Trim," Journal of Fluid Machinery, Vol. 10, No. 4, pp. 61-70, 2007. https://doi.org/10.5293/KFMA.2007.10.4.061
  8. Kwak, K. M., Cho, J. S., Kim, J. D. and Lee, J. H., "A Study on Flow Coefficient and Flow Characteristics for Butterfly Valve by Numerical Analysis," Journal of Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 62-65, 2012.
  9. Park, S. W., Choi, I. S., Noh, K. C., Ryu, S. P. and Yoon, K. S., "An Experimental Study on Measurement of Flow Coefficient Using the Steady-Flow Test Rig," Journal of the Korean Society of Marine Engineering, Vol. 36, No. 4, pp. 423-429, 2012.