풍력에너지저널 (Journal of Wind Energy)

  • 제13권4호
  • /
  • Pages.80-89
  • /
  • 2022
  • /
  • 2093-5099(pISSN)
  • /
  • 2733-9467(eISSN)
한국풍력에너지학회 (Korea Wind Energy Association)
권호 표지
DOI QR코드

DOI QR Code

8 MW급 대용량 풍력발전기용 피치감속기 안전성 평가에 관한 연구

A Study on the Safety Evaluation of the Pitch Reducer for 8 MW Large Capacity Wind Turbines

  • 장서원 (중원대학교, 융합공학과 ) ;
  • 박세호 (중원대학교, 융합공학과 ) ;
  • 이형우 (중원대학교, 항공기계공학과 )
  • 투고 : 2022.10.13
  • 심사 : 2022.11.29
  • 발행 : 2022.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a study was conducted to evaluate the safety of pitch reducers for 8 MW class wind turbines. The housing and carrier of the pitch reducer were subjected to structural analysis for the ultimate load by load duration distribution (LDD). As a result of the finite element analysis of the housing parts, the part with the highest stress was the output housing, and the equivalent stress was 522.4 MPa and the safety factor was 1.14. As a result of finite analysis of the carrier, the highest stress occurred at 80.5 MPa in the first carrier, and the safety factor was 10.3. In addition, extreme strength and life analysis by LDD load were performed for gears and bearings included in each stage. The strength analysis of the planetary gear train was conducted based on ISO 6336, and the stability evaluation of the bearings through life analysis based on ISO 281 found all to be safe.

키워드

과제정보

이 논문은 산업통산부 한국에너지기술평가원이 지원한 '신재생에너지 핵심 기술개발 사업'으로 지원을받아 수행된 연구 결과입니다. (No. 20213030020020)

참고문헌

  1. Nam. J. S., Kim. H. S., and Han. J. W., 2012, "Loading Test Results of Wind Turbine Pitch/Yaw Bearing", Journal of Wind Energy, Vol. 3, No. 1 pp. 61~67 (in Korean) 
  2. Kim. Y. C., 2021, A Study on the Gear Train Design for Blade Adjustment of 4MW class Wind Turbine, Master's thesis, Jungwon University (in Korean) 
  3. Kim. J. G., Park. Y. J., and Yang. W. Y., 2014, "Optimum Design of Pitch Reducer for Wind Turbine Using Genetic Algorithm", The Korean Society of Mechanical Engineers, Vol 38, No. 2, pp. 185~192 (in Korean) 
  4. Robert G. Parker., Vinayak Agashe, and Sandeep M. Vijayakar., 2000, "Dynamic Response of a Planetary Gear System using a Finite Element/Contact Mechanics Model", Journal of Mechanical Design, Vol. 122, pp. 304~310 
  5. Lee. K. H., Lee. G. H., and Chong. T. H., 2008, "Analysis of Structural Characteristics of Power-Split Type Planetary Gear Train", Korean Society for New and Renewable Energy, pp. 311~314 (in Korean) 
  6. Kim. Y. J., Moon. S. M., and Cho. Y. J., 2013, "Load Distribution, Contact and Fatigue Life Analysis of Pitch Bearing for Wind Turbine", The Korean Society of Tribologists & Lubrication Engineers, Vol. 29, No. 1, pp. 33~38 (in Korean) 
  7. Peter J. Schubel and Richard J. Crossley, 2012, "Wind Turbine Blade Design", Energies, 5, pp. 3425~3449 
  8. Kim. D. Y., Lee. I. B., and Lyu. S. K., 2014, "A Study on Components Load of 5MW Wind Turbine Pitch Drive", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 115~120 (in Korean) 
  9. Liang. L. J., Choi. C., and Lyu. S. K., 2014, "Study on Bearing Life Calculation for Wind Turbine Gearbox", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5 pp. 21~27 (in Korean) 
  10. ISO 281, 2007, "International Standard, Rolling Bearings-Dynamic Load Rating Life" 
  11. Lee. J. H., Song. M. E., and Min. J. H.,, 2014, "The study for helical gear bending sress", The Korean Society of Mechanical Engineers (in Korean) 
  12. ISO 6336-3, 1996, "International Standard, Calculation of Load Capacity of Spur and Helical Gears-Calculation of Tooth Bending Strength" 
  13. Korean Register, 2011, "Technical Guidelines for Offshore Wind Turbine", p. 197 (in Korean) 
  14. ANSYS Inc., "ANSYS workbench", ver. 22.2, http://www.ansys.com. 
  15. JIS G 5502, 2015, "Japanese Industrial Standard, Spherodial Graphite Iron Castings" 
  16. JIS G 4053, 2015, "Japanese Industrial Standard, Spherodial Graphite Iron Castings" 
  17. ISO 1083, 1987, "International Standard, Spheroidal graphite cast irons-Classification" 
  18. GL Guide Line, 2010, "Guideline for the Cerification of WindTurbines"