DOI QR코드

DOI QR Code

Discrete sizing and layout optimization of steel truss-framed structures with Simulated Annealing Algorithm

  • Bresolin, Jessica M. (Faculty of Engineering and Architecture, Graduate Program in Civil and Environmental Engineering (PPGEng), University of Passo Fundo (UPF)) ;
  • Pravia, Zacarias M.C. (Faculty of Engineering and Architecture, Graduate Program in Civil and Environmental Engineering (PPGEng), University of Passo Fundo (UPF)) ;
  • Kripka, Moacir (Faculty of Engineering and Architecture, Graduate Program in Civil and Environmental Engineering (PPGEng), University of Passo Fundo (UPF))
  • 투고 : 2021.08.06
  • 심사 : 2022.08.30
  • 발행 : 2022.09.10

초록

Structural design, in general, is developed through trial and error technique which is guided by standards criteria and based on the intuition and experience of the engineer, a context that leads to structural over-dimensioning, with uneconomic solutions. Aiming to find the optimal design, structural optimization methods have been developed to find a balance between cost, structural safety, and material performance. These methods have become a great opportunity in the steel structural engineering domain since they have as their main purpose is weight minimization, a factor directly correlated to the real cost of the structure. Assuming an objective function of minimum weight with stress and displacement constraints provided by Brazilian standards, the present research proposes the sizing optimization and combined approach of sizing and shape optimization, through a software developed to implement the Simulated Annealing metaheuristic algorithm. Therefore, two steel plane frame layouts, each admitting four typical truss geometries, were proposed in order to expose the difference between the optimal solutions. The assessment of the optimal solutions indicates a notable weight reduction, especially in sizing and shape optimization combination, in which the quantity of design variables is increased along with the search space, improving the efficiency of the optimal solutions achieved.

키워드

참고문헌

  1. Croce, E.S., Ferreira, E.G., Lemonge, A.C., Fonseca, L.G. and Barbosa, H.J. (2004), "A genetic algorithm for structural optimization of steel truss roofs. In XXV CILAMCE", 25th Iberian Latin-American Congress on Computational Methods in Engineering, UFPE, Recife, PE, Brasil.
  2. DEGERTEKIN, S.O. and HAYALIOGLU, M.S. (2013), "Sizing truss structures using teaching-learning-based optimization", Comput. Struct., 119, 177-188. https://doi.org/10.1016/j.compstruc.2012.12.011.
  3. Degertekin, S.O., Lamberti, L. and Ugur, I.B. (2019), "Discrete sizing/layout/topology optimization of truss structures with an advanced Jaya algorithm", Appl. Soft Comput., 79, 363-390. https://doi.org/10.1016/j.asoc.2019.03.058.
  4. Fiore, A., Marano, G.C., Greco, R. and Mastromarino, E. (2016), "Structural optimization of hollow-section steel trusses by differential evolution algorithm", Int. J. Steel Struct., 16(2), 411-423. https://doi.org/10.1007/s13296-016-6013-1.
  5. Gholizadeh, S., Davoudi, H. and Fattahi, F. (2017), "Design of steel frames by an enhanced moth-flame optimization algorithm", Steel Compos. Struct., 24(1). 129-140. https://doi.org/10.12989/scs.2017.24.1.129.
  6. Goncalves, M.S., Lopez, R.H. and Miguel, L.F.F. (2015), "Search group algorithm: A new metaheuristic method for the optimization of truss structures", Comput. Struct., 153, 165-184. http://doi.org/10.1016/j.compstruc.2015.03.003.
  7. Hasancebi, O.G.U.Z.H.A.N. and Carbas, S. (2014), "Bat inspired algorithm for discrete size optimization of steel frames", Adv. Eng. Softw., 67(2), 173-185. https://doi.org/10.1016/j.advengsoft.2013.10.003.
  8. HASANCEBI, O. and AZAD, S.K. (2015), "Adaptive dimensional search: A new metaheuristic algorithm for discrete truss sizing optimization", Comput. Struct., 154, 1-16. https://doi.org/10.1016/j.compstruc.2015.03.014.
  9. Haydar, H., Far, H. and Saleh, A. (2018), "Portal steel trusses vs. portal steel frames for long-span industrial buildings", Steel Construct., 11(3), 205-217. https://doi.org/10.1002/stco.201700011.
  10. Kaveh, A. and Khayatazad, M. (2013), "Ray optimization for size and shape optimization of truss structures", Comput. Struct., 117, 82-94. https://doi.org/10.1016/j.compstruc.2012.12.010.
  11. Kaveh, A. and Talatahari, S. (2010), "An improved ant colony optimization for the design of planar steel frames", Eng. Struct., 32(3), 864-873. https://doi.org/10.1016/j.engstruct.2009.12.012.
  12. Kayabekir, A.E., Bekdas, G. and Nigdeli, S.M. (2021), "Developments on metaheuristic-based optimization in structural engineering", In Advances in Structural Engineering-Optimization, 1-22. Springer, Cham.
  13. Kirkpatrick, S., Gelatt Jr, C.D. and Vecchi, M.P. (1983), "Optimization by simulated annealing", Science, 220(4598), 671-680. https://doi.org/10.1126/science.220.4598.671.
  14. Kravanja, S. and Zula, T. (2010), "Cost optimization of industrial steel building structures", Adv. Eng. Softw., 41(3), 442-450. https://doi.org/10.1016/j.advengsoft.2009.03.005.
  15. Kripakaran, P., Gupta, A. and Baugh Jr, J.W. (2007), "A novel optimization approach for minimum cost design of trusses", Comput. Struct., 85(23-24), 1782-1794. https://doi.org/10.1016/j.compstruc.2007.04.006.
  16. Kripka, M. (2004), "Discrete optimization of trusses by simulated annealing", J. Brazil. Soc. Mech. Sci. Eng., 26(2), 170-173. https://doi.org/10.1590/S1678-58782004000200008.
  17. Le, L.A., Bui-Vinh, T., Ho-Huu, V. and Nguyen-Thoi, T. (2017), "An efficient coupled numerical method for reliability-based design optimization of steel frames", J. Construct. Steel Res., 138, 389-400. https://doi.org/10.1016/j.jcsr.2017.08.002.
  18. Metropolis, N., Rosenbluth, A.W., Rosenbluth, M.N., Teller, A. H. and Teller, E. (1953), "Equation of state calculations by fast computing machines", J. Chemical Phys., 21(6), 1087-1092. https://doi.org/10.1063/1.1699114.
  19. Mortazavi, A. and Togan, V. (2021), "Metaheuristic algorithms for optimal design of truss structures", In Advances in Structural Engineering-Optimization, 199-220. Springer, Cham.
  20. NBR 6123 (1998), Forces Due to Wind in Buildings, Brazilian Association of Technical Standards; Rio de Janeiro, RJ, Brazil.
  21. NBR 8681 (2003), Actions and Safety in Structures - Procedure. Brazilian Association of Technical Standards; Rio de Janeiro, RJ, Brazil.
  22. NBR 8800 (1986), Calculation and Execution of Steel Structures, Brazilian Association of Technical Standards; Rio de Janeiro, RJ, Brazil.
  23. NBR 8800 (2008), Design of Steel Structures and Composite Structures for Buildings, Brazilian Association of Technical Standards; Rio de Janeiro, RJ, Brazil.
  24. Petrovic, N., Kostic, N., Marjanovic, N., Zivkovic, J. and Cofaru, I. (2020), "Effects of structural optimization on practical roof truss construction", Appl. Eng. Lett., 5(2), 39-45. https://doi.org/10.18485/aeletters.2020.5.2.1.
  25. Phan, D.T., Lim, J.B., Tanyimboh, T.T. and Sha, W. (2013), "An efficient genetic algorithm for the design optimization of coldformed steel portal frame buildings", Steel Compos. Struct., 15(5), 519-538. https://doi.org/10.12989/scs.2013.15.5.519.
  26. Phan, D.T., Mojtabaei, S.M., Hajirasouliha, I., Ye, J. and Lim, J.B. (2019), "Coupled element and structural level optimization framework for cold-formed steel frames", J. Construct. Steel Res., 168. https://doi.org/10.1016/j.jcsr.2019.105867.
  27. Pierezan, J., dos Santos Coelho, L., Mariani, V.C., de Vasconcelos Segundo, E.H. and Prayogo, D. (2021), "Chaotic coyote algorithm applied to truss optimization problems", Comput. Struct., 242. https://doi.org/10.1016/j.compstruc.2020.106353.
  28. R Core Team (2021). R: A Language and Environment for Statistical Computing. R Foundation for Statistical Computing. Vienna, Austria. https://www.R-project.org/.
  29. Saleem, M.U. (2018), "Design optimization of pre-engineered steel truss buildings", Int. J. Civil Eng. Technol., 9(10), 304-316. http://www.iaeme.com/ijciet/issues.asp?JType=IJCIET&VType=9&IType=10.
  30. Mellaert, R.V., Mela, K., Tiainen, T., Heinisuo, M., Lombaert, G. and Schevenels, M. (2017), "Mixed-integer linear programming reformulation approach for global discrete sizing optimization of trussed steel portal frames", In World Congress of Structural and Multidisciplinary Optimisation, 738-754. Springer, Cham.
  31. Vishwakarma, N. and Tayal, H. (2018), "Optimization of industrial building using pre-engineering building and conventional steel building by fully stressed design", Int. J. Appl. Eng. Res., 13(20), 14573-14590. https://www.ripublication.com/ijaer18/ijaerv13n20_14.pdf.