DOI QR코드

DOI QR Code

Numerical study on steel plate-concrete composite walls subjected to projectile impacts

  • Lee, Kyungkoo (Department of Architectural Engineering, Dankook University) ;
  • Shin, Jinwon (Department of Architectural Engineering, Catholic Kwandong University) ;
  • Lee, Jungwhee (Department of Civil and Environmental Engineering, Dankook University) ;
  • Kim, Kapsun (Central Research Institute, Korea Hydro & Nuclear Power Co., LTD)
  • 투고 : 2021.01.08
  • 심사 : 2022.07.05
  • 발행 : 2022.07.25

초록

Local responses of steel plate-concrete composite (SC) walls under impact loads are typically evaluated using design equations available in the AISC N690s1-15. These equations enable design of impact-resistant SC walls, but some essential parts such as the effects of wall size and shear reinforcement ratio have not been addressed. Also, since they were developed for design basis events, improved equations are required for accurate prediction of the impact behaviors of SC walls for beyond design basis impact evaluation. This paper presents a numerical study to construct a robust numerical model of SC walls subjected to impact loads to reasonably predict the SC-wall impact behavior, to evaluate the findings observed from the impact tests including the effects of the key design parameters, and to assess the actual responses of full-scale SC walls. The numerical calculations are validated using intermediate-scale impact tests performed previously. The influences of the fracture energy of concrete and the conservative aspects of the current design equations are discussed carefully. Recommendations are made for design practice.

키워드

과제정보

This research is supported by Korea Hydro & Nuclear Power (KHNP), Republic of Korea. This support is gratefully acknowledged.

참고문헌

  1. Abdel-Kader, M. and Fouda, A. (2014), "Effect of reinforcement on the response of concrete panels to impact of hard projectiles", Int. J. Impact Eng., 63, 1-17. https://doi.org/10.1016/j.ijimpeng.2013.07.005.
  2. AISC. (2015), Specification for Safety-Related Steel Structures for Nuclear Facilities, incl. Supplement No. 1 (ANSI/AISC N690s1-15). American Institute of Steel Construction, Chicago, IL.
  3. Bruhl, J.C., Varma, A.H. and Johnson, W.H. (2015), "Design of composite SC walls to prevent perforation from missile impact", Int. J. Impact Eng., 75, 75-87. https://doi.org/10.1016/j.ijimpeng.2014.07.015.
  4. CEB (1993), CEB-FIP Model Code 1990: Design Code. Comite euro-international du beton, T. Telford, London.
  5. Choung, J., Im, S.-W., and Kim, K.S. (2011), "Plasticity and fracture behaviors of marine structural steel, part V: effects of strain rate and temperature," The Korean Society of Ocean Engineers, 25(3), 73-84. https://doi.org/10.5574/KSOE.2011.25.3.073
  6. Erhart T. (2011), Review of Solid Element Formulations in LSDYNA. Stuttgart, Germany: LS-DYNA Forum, 36.
  7. FIB (2010), Model Code 2010, First Complete Draft, Volume 1. International Federation for Structural Concrete (fib), Lausanne, Switzerland.
  8. Grisaro, H. and Dancygier, A. (2014), "Assessment of the perforation limit of a composite RC barrier with a rear steel liner to impact of a non-deforming projectile", Int J Impact Eng, 64, 122-136. https://doi.org/10.1016/j.ijimpeng.2013.10.002.
  9. Gyliene, V. and Ostasevicius, V. (2011), "Cowper-Symonds material deformation law application in material cutting process using LS-DYNA FE code: turning and milling", Proceedings of the 8th European LS-DYNA Users' Conference, Strasbourg, France.
  10. Kim, K., Lee, K., Shin, J., Lee, J. and Varma, A. (2020), "A study on the resistance of SC walls subjected to missile impact using largescale impact tests", Int. J. Impact Eng., 139, 103507. https://doi.org/10.1016/j.ijimpeng.2020.103507.
  11. Kim, K.S., Moon, I.H., Choi, H.J. and Nam, D.W. (2017a), "A preliminary study on the local impact behavior of Steel-plate Concrete Walls", Annals of Nuclear Energy, 102, 210-219. https://doi.org/10.1016/j.anucene.2016.12.006.
  12. Kim, K., Lee, J., Lee, K., Kim, W., Chung, C. and Varma, A. (2017b), "Resistance of SC walls subjected to missile impact: Part 2. middle-scale tests", Proceedings of the 24th International Conference on Structural Mechanics in Reactor Technology (SMiRT-24), BEXCO, Busan, Korea.
  13. Kim, K., Suh, Y., Moon, I. and Choi, H. (2015), "A study on the local impact behavior of SC walls using actual test and simulation", Proceedings of the 23rd International Conference on Structural Mechanics in Reactor Technology (SMiRT-23), Paper ID 705, Manchester, UK.
  14. Lee, K., Lee, J., Shin, J., Kim, K., Nam, D. and Varma, A. (2017), "Resistance of SC walls subjected to missile impact: Part 1. preliminary analysis", Proceedings of the 24th International Conference on Structural Mechanics in Reactor Technology (SMiRT-24), BEXCO, Busan, Korea.
  15. Lee, K., Shin, J., Kim, K. and Varma, A. (2020), "Local responses of steel-plate composite walls subjected to impact loads: Intermediate scale tests", Eng. Struct., 206, 110131. https://doi.org/10.1016/j.engstruct.2019.110131.
  16. Liew, J.Y.R., Yan, J.B. and Huang, Z.Y. (2017), "Steel-concretesteel sandwich composite structures-recent innovations", J. Construct. Steel Res., 130, 202-221. https://doi.org/10.1016/j.jcsr.2016.12.007.
  17. LSTC. (2017), LS-DYNA Keyword User's Manual. Livermore Software Technology Corporation, Livermore, CA.
  18. Mizuno J, Tanaka E, Nishimura I, Koshika N, Suzuki A, Mihara Y. (2005), "Investigation on impact resistance of steel plate reinforced concrete barriers against aircraft impact part 3: analyses of full-scale aircraft impact", Proceedings of the 18th SMiRT, International Association for Structural Mechanics in Reactor Technology (IASMiRT).
  19. Murray, Y.D. (2007a), Evaluation of LS-DYNA Concrete Material Model 159. Report No. FHWA-HRT-05-063. Federal Highway Administration, DC.
  20. Murray, Y.D. (2007b), User's Manual for LS-DYNA Concrete Material Model 159. Report No. FHWA-HRT-05-063. Federal Highway Administration, DC.
  21. Qin, Y., Li, Y.W., Su, Y.S., Lan, X.Z., Wu, Y.D., and Wang, X.Y. (2019a), "Compressive behavior of profiled double skin composite wall", Steel Compos. Struct., 30(5), 405-416. https://doi.org/10.12989/scs.2019.30.5.405.
  22. Qin, Y., Li, Y.W., Lan, X.Z., Su, Y.S., Wang, X.Y. and Wu Y.D. (2019b), "Structural behavior of the stiffened double-skin profiled composite walls under compression", Steel Compos. Struct., 31(1), 1-12. https://doi.org/10.12989/scs.2019.31.1.001.
  23. Shin, J., Whittaker, A.S. and Aref, A.J. (2015), "Near-field blast assessment of reinforced concrete components", Int. J. Protect. Struct., 6(3), 487-508. https://doi.org/10.1260/2041-4196.6.3.487
  24. Schwer, L. (2011), "The Winfrith concrete model: Beauty or beast ? - insights into the Winfrith concrete model", Proceedings of the 8th European LS-DYNA Users Conference, Strasbourg.
  25. Tsubota, H., Yasai, Y., Noshika, N., Morikawa, H., Uchida, T., Ohno, T. and Kogure, K. (1993), "Quantitative studies on impact resistance of reinforced concrete panels with steel liners under impact loading part 1: scaled model impact tests", Transactions of the 12th SMiRT, International Association for Structural Mechanics in Reactor Technology (IASMiRT).
  26. Walter, T.A. and Wolde-Tinsae, A.M. (1984), "Turbine missile perforation of reinforced concrete", J. Struct. Eng., ASCE 110(10), 2439-55. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:10(2439).
  27. Wei, F., Zheng, Z. and Yu, J. (2019), "Structural behavior of concrete filled double-steel-plate composite walls under fire", Adv. Struct. Eng., 22(8), 1895-1908. https://doi.org/10.1177/1369433218825238.
  28. Wittmann, F.H., Rokugo, K., Bruhwiler, E., Mihashi, H. and Simonin, P. (1988), "Fracture energy and strain softening of concrete as determined by means of compact tension specimens", Mater. Struct., 21, 21-32. https://doi.org/10.1007/BF02472525.
  29. Wittmann, F.H. (2002), "Crack formation and fracture energy of normal and high strength concrete", Sadhana, 27(4), 413-423. https://doi.org/10.1007/BF02706991.
  30. Yan, J.B., Wang, Z., Wang, T. and Wang, X.T. (2018), "Shear and tensile behaviors of headed stud connectors in double skin composite shear wall", Steel Compos. Struct., 26(6), 759-769. https://doi.org/10.12989/scs.2018.26.6.759.
  31. Yan, J.B., Chen, A.Z. and Wang, T. (2019), "Developments of double skin composite walls using novel enhanced C-channel connectors", Steel Compos. Struct., 33(6), 877-889. https://doi.org/10.12989/scs.2019.33.6.877.
  32. Yousefi, M. and Ghalehnovi, M. (2018), "Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors", Steel Compos. Struct., 27(1), 123-133. https://doi.org/10.12989/scs.2018.27.1.123
  33. Youssf, O., Hassanli, R., Mills, J.E., Ma, X. and Zhuge, Y. (2019), "Cyclic performance of steel-concrete-steel sandwich beams with rubcrete and LECA concrete core", J. Compos. Sci., 3(1), 5. https://doi.org/10.3390/jcs3010005.
  34. Zhang K, Varma H, Malushte S, Gallocher S. (2014), "Effect of shear connectors on local buckling and composite action in steel concrete composite walls", Nuc Eng Des, 269, 231-9. https://doi.org/10.1016/j.nucengdes.2013.08.035
  35. Zhao, W., Guo, Q., Dou, X., Zhou, Y. and Ye, Y. (2018) "Impact response of steel-concrete composite panels: Experiments and FE analyses", Steel Compos. Struct., 26(3), 255-263 https://doi.org/10.12989/scs.2018.26.3.255.