DOI QR코드

DOI QR Code

Design and Development of a Public Waste Battery Diagnostic Device

  • Received : 2022.08.01
  • Accepted : 2022.09.05
  • Published : 2022.09.30

Abstract

In this study, design of an intuitive internal resistance diagnostic device is to diagnose the residual capacity and aging of the battery regardless of the model and the internal protocol of the waste battery through the method of measuring the internal resistance of a waste battery. In this paper, charging and discharging were continuously performed with 2A charging and 5A discharging in order to secure data on impedance changes that may occur in the charging and discharging process of various methods. As a result of the final experiment, it was confirmed that the impedance change occurred during charging and discharging, and the amount of change increased as the charging/discharging C-rate increased. In addition, it was confirmed that the waste battery aged or abnormal cell had a large change in the impedance value.

Keywords

Acknowledgement

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2022R1G1A1013300).

References

  1. IEA, CO2 Emissions from Fuel Combustion, pp. 58, 2017.
  2. J. Kim, S. Lee, J. Lee and B. Cho, "The Characteristics Analysis of Li-Ion Fresh Battery for Temperature," in Proc. KIPE Conference, pp. 66-68, Nov.30, 2007.
  3. D.H. Shin, J.B. Jeong, R.H. Kim, and H.J. Kim, "Modeling of Lithium Battery Cells for Plug-In Hybrid Vehicles", The Journal of the Institute of Power Electronics(JPE), Vol. 13, No. 3, pp.429-436, May 2013.
  4. J. Park and C. Lee, "Electric vehicle waste battery management plan," Kyungnam Development Institute, 2018.
  5. S.B. Kim and S.H. Lee, "Development of Aging Diagnosis Device Through Real-time Battery Internal Resistance Measurement," The Journal of the Institute of Internet, Broadcasting and Communication (JIIBC), Vol. 14, No. 2, pp. 129-135, May 2022. DOI: http://dx.doi.org/10.7236/IJIBC.2022.14.2.129
  6. S.B. Kim and S.H. Lee, "Design and development of less than 1Kw Lithium rechargeable battery pack," The Journal of the Institute of Internet, Broadcasting and Communication(JIIBC), Vol. 10, No. 3, pp. 104-108, July 2018. DOI: https://doi.org/10.7236/IJIBC.2018.10.3.104
  7. S.B. Kim and S.H. Lee, "Battery Balancing Algorithm for an Agricultural Drone Using a State-of-ChargeBased Fuzzy Controller," The Journal of the Institute of Applied Sciences-Basel(JIASB), Vol. 10, No. 15, special issue 5277, Aug 2020. DOI: https://doi.org/10.3390/app10155277.
  8. J. Schmitt, A. Maheshwari, M. Heck, S. Lux, and M. Vetter, "Impedance change and capacity fade of lithium nickel manganese cobalt oxide-based batteries during calendar aging," The Journal of the Institute of Power Sources(JIPS), Vol. 353, No. 15, pp. 183-194, Jun. 2017. https://doi.org/10.1016/j.jpowsour.2017.03.090