Acknowledgement
본 논문은 2022년도 소재부품기술개발 소재부품패커지형기술개발사업(산업통상자원부)의 재원으로 한국산업기술평가관리원의 지원을 받아 수행된 연구임(No.20013303, 열가소성 및 열 UV경화형 광학플라스틱 수지의 광학렌즈와 모듈 개발)
References
- Hongtao Han and Keith Main, "Low Cost Camera Modules Using Integration of Wafer-Scale Optics and Wafer-Level Packaging of Image Sensors" Asia Communications and Photonics Conference and Exhibition, Shanghai, Vol. 7631, pp. 1-7, Nov, 2009. DOI: https://doi.org/10.1364/ACP.2009.FH6
- Giles H., Kidron, B. and Kriman, M., "Low Cost Through Silicon Via Solution Compatible with Existing Assembly Infrastructure and Suitable for Single Die and Die Stacked Packages," IEEE International Microsystems, Packaging, Assembly & Circuits Technology Conference, Taipei, pp. 61-64, October, 2008. DOI: https://doi.org/10.1109/EMAP.2008.4784229
- Giles H., "Novel and Low Cost Through Silicon Via Solution for Wafer Scale Packaging of Image Sensors," IEEE Electrical Design of Advanced Packaging and Systems Symposium, Seoul, pp. 179-182, 2008. DOI: https://doi.org/10.1109/EDAPS.2008.4736029
- Dagan, Y., "Wafer-level optics enables low cost camera phones" Integrated Optics: Devices, Materials, and Technologies XIII, Proceedings of SPIE, Vol. 7218, 72180P, 2009. DOI: https://doi.org/10.1117/12.811609
- Park, S.H. and Moon, J.S., Analysis of the shrinkage and warpage of Wafer lens during UV curing, Journal of the Korea Academia-Industrial cooperation Society, Vol. 15:11, pp. 6464-6471, 2014. DOI: https://doi.org/10.5762/KAIS.2014.15.11.6464
- Hideaki N., Masaharu F., Tomoyuki A. Daisuke M., Seiki S., Mami N. and Nobutaka I., "Thermal Stress Simulation Method in Substrate with Cure Shrinkage Reaction of Thermosetting Resin," 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), Taipei, Taiwan, pp. 135-138, 2018. DOI: https://doi.org/10.1109/IMPACT.2018.8625779
- Park, S.H., Hwang, Y. and Kim, D.G., A Study on the Release Characteristics During Wafer-Level Lens Molding Using Thermosetting Materials, Journal of Korea Academia-Industrial cooperation Society, vol. 22:1, pp. 461-467, 2021. DOI: https://doi.org/10.5762/KAIS.2021.22.1.461
- ASTM D2566 "Standard test method for linear shrinkage of cured thermosettings casting resins during cure", 1986.
- Zhang, J., Xu, Y.C. and Hunag P., Effect of cure cycle on curing process and hardness for epoxy resin, eXPRESS Polymer Letters Vol. 3:9, pp. 534-541, 2009. DOI: 10.3144/expresspolymlett.2009.67
- Pingsheng, H., Zhiqiang, Z. and Caiyuan, P. An epoxy resin copolymer with zero shrinkage. J Mater Sci 24, pp. 1528 1532, 1989. DOI: https://doi.org/10.1007/BF01105666
- Yates, B., McCalla, B.A., Phillips, L.N., Kingston-Lee, D.M. and Rogersal, K.F., The thermal expansion of carbon fibre-reinforced plastics J Mater Sci 14, pp. 1207 1217. 1979. DOI: https://doi.org/10.1007/BF00561306
- Snow, A.W. and Armistead, J.P., "Dilatometry on Thermoset Resins", NRL Maeminmdu Report, 1991.
- Chun L., Kevin P., Michael R.W. and Graeme S., In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method Composites Science and Technology,Vol. 64:1, pp. 55-64 2004. DOI: https://doi.org/10.1016/S0266-3538(03)00199-4
- Yu, H., Mhaisalkar, S.G. and Wong, E.H., Observations of Gelation and Vitrification of a Thermosetting Resin during the Evolution of Polymerization Shrinkage, Macromol. Rapid Commun. 26, pp. 1483-1487, 2005. DOI:https://doi.org/10.1002/marc.200500333
- Mohsan H., Pascal H. and Larry L., Cure shrinkage characterization and modeling of a polyester resin containing low profile additives, Composites Part A: Applied Science and Manufacturing, Vol. 38:3, pp. 994-1009, 2007. DOI: https://doi.org/10.1016/j.compositesa.2006.06.020.
- B. Patham, "COMSOL® Implementation of a viscoelastic model with cure-temperature-time superposition for predicting cure stresses and springback in a thermoset resin", Excerpt from the Proceedings of the COMSOL Conference 2009 Bangalore