Structural Engineering and Mechanics

  • 제83권6호
  • /
  • Pages.789-798
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Push-out tests on stud shear connectors with constrained structure of steel-concrete composite beams

  • Qi, Jingjing (School of Civil Engineering, Hunan University of Science and Technology) ;
  • Xie, Zuwei (School of Civil Engineering, Hunan University of Science and Technology) ;
  • Cao, Hua (Hunan Architectural Design Institute Limited Company) ;
  • Huang, Zhi (School of Civil Engineering, Hunan University of Science and Technology) ;
  • Lv, Weirong (School of Civil Engineering, Hunan University of Science and Technology) ;
  • Shi, Weihua (School of Civil Engineering, Hunan University of Science and Technology)
  • 투고 : 2021.09.23
  • 심사 : 2022.07.25
  • 발행 : 2022.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The stud shear connector is the main force transfer member in the steel-concrete composite member, and the mechanical behavior is very complicated in the concrete. The concrete around the stud is subjected to the pry-out local pressure concentration of the stud, which can easily produce splitting mirco-cracks. In order to solve the problem of pry-out local splitting of stud shear connector, a kind of stud shear connector with constraint measure is proposed in this paper. Through the push-out test, the interface shear behavior of the new stud shear connector between steel and concrete flange plate was studied, and the difference between the new stud shear connector and the traditional stud connector was compared. The results show that the stud shear connector with constraint measure can effectively avoid the adverse effect of local pressure splitting by relying on its own constraint measure. The shear stiffness of the interface between steel and concrete flange plates is greatly improved, which provides a theoretical basis for the design of strong connection coefficient of steel-concrete composite structures.

키워드

과제정보

The research described in this paper was supported by the Research Foundation of Education Bureau of Hunan Province, China (Grant No. 20A184), the Natural Science Foundation of Hunan Province, China (Grant No. 2021JJ30261), the Natural Science Foundation of Hunan Province, China (Grant No. 2019JJ50185), The National Natural Science Foundation of China (Grant No. 51578235) and the Natural Science Foundation of Hunan Province, China (Grant No. 2018JJ2129).

참고문헌

  1. Eurocode 4 (1994), Design of Composite Steel and Concrete Structures-Part 1.1: General Rules and Rules for Buildings, Brussels, CEN.
  2. Feng, Y.L., Jiang, L.Z., Zhou, W.B. and Han, J.P. (2019), "Lateraltorsional buckling of box beam with corrugated steel webs", J. Centr. South Univ., 26(07), 1946-1957. https://doi.org/10.1007/s11771-019-4122-0.
  3. GB50017-2017 (2017), Standard for Design of Steel Structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China.
  4. GB50017-2017 (2017), Standard for Design of Steel Structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China.
  5. GB50917-2013 (2013), Code for Design of Composite Structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China.
  6. GB50917-2013 (2013), Code for Design of Steel and Concrete Composite Bridges, Ministry of Housing and Urban-Rural Development of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China.
  7. Jean, P.L. and Manfred, A.H. (2014), Concept and Structure Design of Steel-Steel-Concrete Combined Bridge, China Communications Press, Beijing, China.
  8. Ji, T.G. (2013), "Experimental study of shear stiffness of shear bolt studs", World Bridge., 41(06), 62-66.
  9. Kou, L.Y. (2010), "Research and perspective of slip property of composite steel-concrete beams", Arch. Struct. Des., 11, 43-46.
  10. Li, Y.Z. (2019), "Shear behavior of GFRP profile-UHPC hybrid beams:experimental study", Master Dissertation, Zhengzhou University, Zhengzhou, China.
  11. Nie, J.G. (2011), Steel-Concrete Composite Structure Bridge, China Communications Press, Beijing, China.
  12. Nie, J.G., Shen, J.M. and Yu, Z.W. (1995), "A reduced rigidity method for calculating deformation of composite steel-concrete beams", China Civil Eng. J., 28(6), 11-17.
  13. Nie, J.G., Shen, J.M. and Yuan, Y.S. (1996), "Research on the actual bearing capacity of shear connectors in steel-concrete composite beams", J. Build. Struct., 17(2), 21-28.
  14. Wan, S.C., Huang, J. and Guan, J.(2019), "Test on flexural behavior of steel-concrete composite beams strengthened with prestressed carbon fiber-reinforced polymer plates", J. Harbin Inst. Technol., 51(3), 80-87
  15. Yao, H.R. (2005), "Deflection deformation analysis and calculation theory research of prestressed steel-concrete composite beam", Master Dissertation, Chang'an University, Xi'an, China.
  16. Yu, Z.W. and Jiang, L.Z. (2015), Seismic Resistance and Stability of Steel-Concrete Composite Structure, Science Press, Beijing, China.
  17. Yu, Z.W., Jiang, L.Z. and Li, J. (2003), "The interface slip and deformation of steel-concrete composite beams under concentrated loads", China Civil Eng. J., 36(8), 1-6
  18. Yuan, W.N., An, Z.H. and Zhang, X. (2009), "Simulation anslysis of push-out test based on ansys software", Indus. Constr., 39, 503-505.
  19. Zeng, X.Z. (2017), "Shear behavior of steel-utra-high performance concrete-steel sandwich composite beams for nuclear facilities", Master Dissertation, Harbin Institute of Technology, Heilongjiang, China.
  20. Zhang, M., Wang, Y. and Zhang, Z. (2014), "Analysis on the ultimate shear capacity of double-nut stud shear connector in composite structures", Prog. Steel Build. Struct., 16(2), 13-22
  21. Zhao, G.N. (2019), "Research on composite beams made of carbon fiber-steel-high performance cementitious composite", Master Dissertation, Jilin Jianzhu University, Jilin, China.
  22. Zhou, H. and Zhang, Y. (2004), "Talking about the shear connectors of steel-concrete composite beams", Sichuan Arch., 24(5), 50-53.
  23. Zhou, W.B., Xu, T.X., Tan, Z.H., Zhong, T.X., Liu, S.H., and Jiang, L.Z. (2021), "Analysis of the flexural bearing capacity of simply supported steel-concrete composite box girders with corrugated steel webs", J. Railw. Sci. Eng., 18(08), 2089-2096.