Acknowledgement
이 논문은 해양수산부 재원으로 해양수산과학기술진흥원의 지원을 받아 수행된 연구임(선박 배출 대기오염물질 동시저감 후처리시스템 실증 및 인증체계 구축).
References
- P. S. Maiya and D. E. Busch, Effect of surface roughness on low-cycle fatigue behavior of type 304 stainless steel, Metallurgical Transactions A, 6, 1761 (1975). Doi: https://doi.org/10.1007/BF02642305
- T. Ogawa, K. Tokaji and K. Ohya, The effect of microstructure and fracture surface roughness on fatigue crack propagation in a Ti-6A1-4V alloy, Fatigue & Fracture of Engineering Materials & Structures, 16, 973 (1993). Doi: https://doi.org/10.1111/j.1460-2695.1993.tb00132.x
- I. Gibson, D. W. Rosen and B. Stucker, Photopolymerization Processes, Additive manufacturing technologies, 4, 78 (2010). Doi: https://doi.org/10.1007/978-1-4419-1120-9_4
- H. Zhao, J. V. Humbeeck, J. Sohier and I. D Scheerder, Electrochemical polishing of 316L stainless steel slotted tube coronary stents, Journal of Materials Science-Materials in Medicine, 13, 911 (2002). Doi: https://doi.org/10.1023/A:1019831808503
- S. H. Kim, S. H. Lee, J. H. Cho, D. H. Lim, J. S. Choi and C. H. Park, Process Optimization for Life Extension of Electropolishing Solution using Half Round Bus Bar, The Korean Institute of Surface Engineering, 49, 447 (2016). Doi: https://doi.org/10.5695/JKISE.2016.49.5.447
- F. Nazneen,, P. Galvin, D. W. M. Arrigan, M. Thompson, P. Benvenuto and G. Herzog, Electropolishing of medical-grade stainless steel in preparation for surface nano-texturing, Journal of Solid State Electrochemistry, 16, 1389 (2012). Doi: https://doi.org/10.1007/s10008-011-1539-9
- M. Baumers, P. Dickens, C. Tuck and P. Hague, The cost of additive manufacturing: machine productivity, economies of scale and technology-push, Technological Forecasting and Social Change, 102, 193 (2016). https://doi.org/10.1016/j.techfore.2015.02.015
- R. J. Hebert, Viewpoint: metallurgical aspects of powder bed metal additive manufacturing, Journal of Materials Science, 51, 1165 (2016). Doi: https://doi.org/10.1007/s10853-015-9479-x
- M. Baumers, P. Dickens, C. Tuck, and P. Hague, The cost of additive manufacturing: machine productivity, economies of scale and technology-push, Technological Forecasting and Social Change, 102, 193 (2016). Doi: https://doi.org/10.1016/j.techfore.2015.02.015
- S.C. Tam, N.L. Loh, C.P.A. Mah, N.H. Loh, Electrochemical polishing of biomedical titanium orifice rings, Journal of Materials Processing Technology, 35, 83 (1992). Doi: https://doi.org/10.1016/0924-0136(92)90303-A
- C.C Lin, C. C. Hu, Electropolishing of 304 stainless steel: Surface roughness control using experimental design strategies and a summarized electropolishing model, Electrochimica Acta, 53, 3356 (2008). Doi: https://doi.org/10.1016/j.electacta.2007.11.075
- D. Landolt, Fundamental aspects of electropolishing, Electrochimica Acta, 32, 1 (1987). Doi: https://doi.org/10.1016/0013-4686(87)87001-9
- D. Brent, T. A. Saunder, F. G. Moreno, P. Tyagi, Taguchi Design of Experiment for the Optimization of Electrochemical Polishing of Metal Additive Manufacturing Components, Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, 2, 1 (2017). Doi: https://doi.org/10.1115/IMECE2016-67492
- J. Y. Jang, J. S. Song and J. S. Nah, Effect of polishing solution temperature and times by electro-polishing in dental casting Co-Cr-Mo alloy, Journal of Korean Acedemy of Dental Technology, 34, 145 (2012). Doi: https://doi.org/10.14347/kadt.2012.34.2.145
- S. H. Kim, Process Optimization for Life Extension of Electropolishing Solution for Semiconductor Piping Tube, A thesis for a doctorate, KWANGWOON University (2016).
- K. H. Jung, Investigation on the Prediction of Electrochemical and Mechanical Characteristics of Stainless Steel for Marine Environments using Machine Learning and Experimental Design, A thesis for a doctorate, Mokpo National Maritime University (2020).
- G. Taguchi, Introduction to quality engineering: designing quality into products and processes, The National Academies of Sciences, Engineering and Medicine, 191 (1986). http://worldcat.org/isbn/9283310845 10845
- S. B. Lee, Minitab example-driven design of experiments, ERETECH, 9 (2018).
- S. G. Nahm, Understanding Effect Sizes, Hanyand Medical Reviews, 35, 40 (2015). Doi: http://dx.doi.org/10.7599/hmr.2015.35.1.40
- C. Clerc, M. Datta, and D. Landolt, On the theory of anodic levelling: Model experiments with triangular nickel profiles in chloride solution, Electrochimica Acta, 29, 1477 (1984). Doi: https://doi.org/10.1016/0013-4686(84)87031-0
- E. J. Taylor, and M. Inman, Electrochemical Surface Finishing, The Electrochemical Society Interface, 23, 57 (2014). Doi: https://doi.org/10.1149/2.F05143if
- E. L. Widla, P. Lochynski and G Nawrat, Electrochemical Polishing of Austenitic Stainless Steels, Materials, 13, 2557 (2020). Doi: https://doi.org/10.3390/ma13112557
- E. L. Smith, A. P. Abbott and K. S Ryder, Deep Eutectic Solvents (DESs) and Their Applications, Chemical Reviews, 114, 11060 (2014). Doi: https://doi.org/10.1021/cr300162p
- S. J. Lee, Y. H. Chen, J. H. Hung, The Investigation of Surface Morphology Forming Mechanisms in Electropolishing Process, International Journal of Electrochemical Science, 7, 12495 (2012). https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.657.9335&rep=rep1&type=pdf https://doi.org/10.1.1.657.9335&rep=rep1&type=pdf
- M. Datta and D. Landolt, Fundamental aspects and applications of electrochemical microfabrication, Electrochimca Acta, 45, 2535 (2000). Doi: https://doi.org/10.1016/S0013-4686(00)00350-9
- S. T. Kim, Y. S. Park and H. J. Kim, Effects of copper and sulfur Additions on corrosion resistance and machinability of austenitic stainless steel, Corrosion Science and Technology, 31, 122 (2002). https://www.j-cst.org/data/issue/CST/C000102/C00010200122.pdf 102/C00010200122.pdf
- Y. Wang and P. M. Singh, Corrosion Behavior of Austenitic and Duplex Stainless Steels in Thiosulfateand Chloride-Containing Environments, CORROSION, 71, 937 (2015). Doi: https://doi.org/10.5006/1694
- I, C. Park and S. J. Kim, Electrochemical Damage Characteristics of Anodized 5083 Aluminum Alloy with Flow Rate in Seawater, Journal of the Korean institute of surface engineering, 49, 349 (2016). Doi: https://doi.org/10.5695/JKISE.2016.49.4.349
- H. K. Hwang and S. J. Kim, Electrochemical Properties of Austenitic Stainless Steel with Initial Delay Time and Surface Roughness in Electropolishing Solution, Corrosion Science and Technology, 21, 158 (2022). Doi: https://doi.org/10.14773/cst.2022.21.2.158
- D. H. Shin, S. J. Kim, Corrosion Characteristics of 316L Stainless Steel with Chloride Concentrations in Cathode Operating Conditions of Metallic Bipolar Plate for PEMFC. Corrosion Science and Technology, 20, 435 (2021). Doi: https://doi.org/10.14773/cst.2021.20.6.435