Acknowledgement
This research was supported by the research funds of Mokpo National University in 2020.
References
- Ahn, J.H., Kim, J.H., Kim, J.D., Park, S.K., Park, K.H., Byun, J.S., & Lee, J.M. (2018). Development and Mechanical and Thermal Performance Evaluation of Polyurethane foam Composites Reinforced with Glass Bubbles. Journal of the Korean Society of Marine Engineering, 42(9), 708-714. http://doi.org/10.5916/jkosme.2018.42.9.708
- Denay, A.G., Castagnet, S., Roy, A., Alise1, G., & Thenard, N. (2013). Compression Behavior of Glass-fiber-reinforced and Pure Polyurethane Foams at Negative Temperatures Down to Cryogenic Ones. Journal of Cellular Plastics, 49(3), 209-222. https://doi.org/10.1177/0021955X13477672
- Jang, C.W., Shim, C.S., Song, H.C., & Song, C.Y. (2013). Study on Cryogenic Behavior of Reinforced Polyurethane Foam for Membrane Type LNG Carrier. Journal of Ocean Engineering and Technology, 27(1), 74-79. https://doi.org/10.5574/KSOE.2013.27.1.074
- Han, D.S., Park, I.B., Kim, M.H., Noh, B.J., Kim, W.S., & Lee, J.M. (2010). The Effects of Glass Fiber Reinforcement on the Mechanical Behavior of Polyurethane Foam. Journal of Mechanical Science and Technology, 24, 263-266. https://doi.org/10.1007/s12206-009-1136-3
- Kim, M.S., Kim, J.H., Kim, S.K., & Lee, J.M. (2019a). Effect of Repetitive Impacts on the Mechanical Behavior of Glass Fiber-reinforced Polyurethane Foam. Journal of Ocean Engineering and Technology 33(1), 85-91. https://doi.org/10.26748/KSOE.2018.068
- Kim, J.Y., Kim, J.D., & Lee, J.M. (2019b). Mechanical and Thermal Characteristics of Polyurethane Foam with Tow Different Reinforcements and the Effects of Ultrasonic Dispersion in Manufacturing. Journal of the Society of Naval Architects of Korea, 56(6), 515-522. http://doi.org/10.3744/SNAK.2019.56.6.515
- Lee, C.S., Kim, M.S., Park, S.B., Kim, J.H., Bang, C.S., & Lee, J.M. (2015). A Temperature- and Strain-rate-dependent Isotropic Elasto-viscoplastic Model for Glass-fiber-reinforced Polyurethane Foam. Materials and Design, 84, 163-172. https://doi.org/10.1016/j.matdes.2015.06.086
- Oh, J.H., Bea, J.H., & Lee, J.M. (2018). The Effects of Kevlar Pulp on Polyurethane Foam for Cryogenic Temperature. Journal of the Society of Naval Architects of Korea, 55(6), 514-520. https://doi.org/10.3744/SNAK.2018.55.6.514
- Park, S.B., Kim, J.H., & Lee, J.M. (2014). Comparative Study on Mechanical Behavior of Low Temperature Characteristics of Polymeric Foams for Ships and Offshore Structures. Journal of the Society of Naval Architects of Korea, 51(6), 495-502. https://doi.org/10.3744/SNAK.2014.51.6.495
- Park, S.B., Lee, C.S., Choi, S.W., Kim, J.H., Bang, C.S., & Lee, J.M. (2016). Polymeric Foams for Cryogenic Temperature Application: Temperature Range for Non-recovery and Brittle-fracture of Microstructure. Composite Structures, 136, 258-269. https://doi.org/10.1016/j.compstruct.2015.10.002