과제정보
This work was partly supported by Korea Evaluation Institute of Industrial Technology (KEIT) grant funded by the Korea government (MOTIE) (Project No. 20015917).
참고문헌
- S. G. Kandlikar, S. Colin, Y. Peles, S. Garimella, R.F. Pease, J. J. Brandner, and D. B. Tuckerman, "Heat transfer in microchannels-2012 status and research needs", J. Heat Transfer, Vol. 135, No. 9, 2013, pp. 091001, doi: https://doi.org/10.1115/1.4024354.
- M. H. Kim and C. W. Bullard, "Performance evaluation of a window room air conditioner with microchannel condensers", J. Energy Resour. Technol., Vol. 124, No. 1, 2002, pp. 47-55, doi: https://doi.org/10.1115/1.1446072.
- J. C. S. Garcia, H. Tanaka, N. Giannetti, Y. Sei, K. Saito, M. Houfuku, and R. Takafuji, "Multiobjective geometry optimization of microchannel heat exchanger using real-coded genetic algorithm", Appl. Therm. Eng., Vol. 202, 2022, pp. 117821, doi: https://doi.org/10.1016/j.applthermaleng.2021.117821.
- C. H. Kim, H. S. Kim, H. S. Lim, J. W. Choi, I. H. Choi, and N. H. Kim, "Two-phase refrigerant distribution for a horizontal header/horizontal mini-channel tube config- uration", Heat Mass Transf., Vol. 58, 2022, pp. 587-600, doi: https://doi.org/10.1007/s00231-021-03135-5.
- A. Saleem and M. H. Kim, "Air-side thermal hydraulic perform ance of m icrochannel heat exchangers w ith different fin configurations", Appl. Therm. Eng., Vol. 125, 2017, pp. 780-789, doi: https://doi.org/10.1016/j.applthermaleng.2017.07.082.
- H. Lim, U. Han, and H. Lee, "Design optimization of bare tube heat exchanger for the application to mobile air conditioning systems", Appl. Therm. Eng., Vol. 165, 2020, pp. 114609, doi: https://doi.org/10.1016/j.applthermaleng.2019.114609.
- Z. Li, J. Ling, V. Aute, and R. Radermacher, "Investigation of port level refrigerant flow maldistribution in microchannel heat exchanger", 12th IEA Heat Pump Conference, 2017, pp. 1-11. Retrieved from http://hpc2017.org/wp-content/uploads/2017/05/O.3.1.4-Investigation-of-Port-Level-Flow-Maldistribution-in-Microchannel-Heat-Exchanger.pdf.
- E. Da Riva and D. Del Col, "Effect of gravity during condensation of R134a in a circular minichannel : VOF simulation of annular condensation", Microgravity Sci. Techn., Vol. 23, No. Suppl 1, 2011, pp. 87-97, doi: https://doi.org/10.1007/s12217-011-9275-4.
- E. Da Riva and D. Del Col, "Numerical simulation of laminar liquid film condensation in a horizontal circular minichannel", J. Heat Transfer, Vol. 134, No. 5, 2012, pp. 051019, doi: https://doi.org/10.1115/1.4005710.
- H. Ganapathy, A. Shooshtari, K. Choo, S. Dessiatoun, M. Alshehhi, and M. Ohadi, "Volume of fluid-based numerical modeling of condensation heat transfer and fluid flow characteristics in microchannels", Int. J. Heat and Mass Transfer, Vol. 65, 2013, pp. 62-72, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2013.05.044.
- S. Bortolin, E. Da Riva, and D. Del Col, "Condensation in a square minichannel: application of the VOF method", Heat Transfer Eng., Vol. 35, No. 2, 2014, pp. 193-203, doi: https://doi.org/10.1080/01457632.2013.812493.
- P. Gunnasegaran, H. A. Mohammed, N. H. Shuaib, and R. Saidur, "The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes", International Communications in Heat and Mass Transfer, Vol. 37, No. 8, 2010, pp. 1078-1086, doi: https://doi.org/10.1016/j.icheatmasstransfer.2010.06.014.
- H. Wang, Z. Chen, and J. Gao, "Influence of geometric parameters on flow and heat transfer performance of micro -channel heat sinks", Applied Thermal Engineering, Vol. 107, 2016, pp. 870-879, doi: https://doi.org/10.1016/j.applthermaleng.2016.07.039.
- Y. Chen, C. Zhang, M. Shi, and J. Wu, "Three-dimensional numerical simulation of heat and fluid flow in noncircular microchannel heat sinks", International Communications in Heat and Mass Transfer, Vol. 36, No. 9, 2009, pp. 917-920, doi: https://doi.org/10.1016/j.icheatmasstransfer.2009.06.004.
- D. Jing and L. He, "Numerical studies on the hydraulic and thermal performances of microchannels with different crosssectional shapes", International Journal of Heat and Mass Transfer, Vol. 143, 2019, pp. 118604, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118604.
- M. H. Kim and C. W. Bullard, "Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers", International Journal of Refrigeration, Vol. 25, No. 3, 2002, pp. 390-400, doi: https://doi.org/10.1016/S0140-7007(01)00025-1.
- M. H. Kim, S. Y. Lee, S. S. Mehendale, and R. L. Webb, "Microchannel heat exchanger design for evaporator and condenser applications", Advances in Heat Transfer, Vol. 37, 2003, pp. 297-429, doi: https://doi.org/10.1016/S0065-2717(03)37004-2.
- M.V M. Shah, "Improved correlation for heat transfer during condensation in conventional and mini/micro channels", International Journal of Refrigeration, Vol. 98, 2019, pp. 222-237, doi: https://doi.org/10.1016/j.ijrefrig.2018.07.037.
- M. H. Kim and C. W. Bullard, "Development of a micro-channel evaporator model for a CO2 air conditioning system", Energy, Vol. 26, No. 10, 2001, pp. 931-948, doi: https://doi.org/10.1016/S0360-5442(01)00042-1.