DOI QR코드

DOI QR Code

Estimating quantiles of extreme wind speed using generalized extreme value distribution fitted based on the order statistics

  • Liu, Y.X. (Department of Civil and Environmental Engineering, University of Western Ontario) ;
  • Hong, H.P. (Department of Civil and Environmental Engineering, University of Western Ontario)
  • 투고 : 2021.09.26
  • 심사 : 2022.03.17
  • 발행 : 2022.06.25

초록

The generalized extreme value distribution (GEVD) is frequently used to fit the block maximum of environmental parameters such as the annual maximum wind speed. There are several methods for estimating the parameters of the GEV distribution, including the least-squares method (LSM). However, the application of the LSM with the expected order statistics has not been reported. This study fills this gap by proposing a fitting method based on the expected order statistics. The study also proposes a plotting position to approximate the expected order statistics; the proposed plotting position depends on the distribution shape parameter. The use of this approximation for distribution fitting is carried out. Simulation analysis results indicate that the developed fitting procedure based on the expected order statistics or its approximation for GEVD is effective for estimating the distribution parameters and quantiles. The values of the probability plotting correlation coefficient that may be used to test the distributional hypothesis are calculated and presented. The developed fitting method is applied to extreme thunderstorm and non-thunderstorm winds for several major cities in Canada. Also, the implication of using the GEVD and Gumbel distribution to model the extreme wind speed on the structural reliability is presented and elaborated.

키워드

과제정보

The financial support received from the Natural Sciences and Engineering Research Council of Canada (RGPIN-2016-04814, for HPH) is acknowledged.

참고문헌

  1. Arnell, N.W., Beran, M. and Hosking, J.R.M. (1986), "Unbiased plotting positions for the general extreme value distribution", J. Hydrology, 86(1-2), 59-69. https://doi.org/10.1016/0022-1694(86)90006-5.
  2. Bartlett, F.M., Hong, H.P. and Zhou, W. (2003a), "Load factor calibration for the proposed 2005 edition of the National Building Code of Canada: Statistics of loads and load effects", Canadian J. Civil Eng., 30(2) 429-439. https://doi.org/10.1139/l02-087.
  3. Bartlett, F.M., Hong, H.P. and Zhou, W. (2003b), "Load Factor Calibration for the Proposed 2005 Edition of the National Building Code of Canada: Companion-action load combinations", Canadian J. Civil Eng., 30(2), 440-448. https://doi.org/10.1139/l02-086.
  4. Blom, G. (1958), Statistical Estimates and Transformed Beta-Variables, Ph.D. Dissertation, Stockholm College, Stockholm.
  5. Boehlert, B. and Vogel, R.M. (2015), Goodness-of-Fit can be Misleading, A Critical Evaluation of the Application of Natural Hazard and Climate Models, Ph.D. Dissertation, Tufts University, Medford.
  6. Castillo, E., Hadi, A.S., Balakrishnan, N. and Sarabia, J.M. (2005), Extreme Value and Related Models with Applications in Engineering and Science, John Wiley & Sons, New York, U.S.A.
  7. Cook, N.J. and Harris, R.I. (2013), "The Gringorten estimator revisited", Wind Struct., 16(4), 355-372. https://doi.org/10.12989/was.2013.16.4.355.
  8. David H.A. and H.N. Nagaraja (2004), Order Statistics, John Wiley & Sons, New York, U.S.A.
  9. Draper, N.R. and Smith, H. (1998), Applied Regression Analysis, Wiley, New York, U.S.A.
  10. Filliben, J.J. (1975), "The probability plot correlation coefficient test for normality", Technometrics, 17(1), 111-117. https://doi.org/10.1080/00401706.1975.10489279
  11. Gu, J.Y., Sheng, C. and Hong, H.P. (2020), "Comparison of tropical cyclone wind field models and their influence on estimated wind hazard", Wind Struct., 31(4), 321-334. https://doi.org/10.12989/was.2020.31.4.321.
  12. Holmes, J.D. and Moriarty, W.W. (1999), "Application of the generalized Pareto distribution to extreme value analysis in wind engineering", J. Wind Eng. Ind. Aerod., 83(1-3), 1-10. https://doi.org/10.1016/S0167-6105(99)00056-2.
  13. He, Y., Li, Q., Chan, P., Zhang, L., Yang, H. and Li, L. (2020), "Observational study of wind characteristics from 356-meter-high Shenzhen Meteorological Tower during a severe typhoon", Wind Struct., 30(6), 575-595. https://doi.org/10.12989/was.2020.30.6.375.
  14. Hong, H.P., Huang, Q., Jiang, W.J., Tang, Q. and Jarrett, P. (2021), "Tornado wind hazard mapping and equivalent tornado design wind profile for Canada", Struct.Safety, 91, 102078. https://doi.org/10.1016/j.strusafe.2021.102078.
  15. Hong, H.P. and Li, S.H. (2014), "Plotting positions and approximating first two moments of order statistics for Gumbel distribution: estimating quantiles of wind speed", Wind Struct., 19(4), 371-387. https://doi.org/10.12989/was.2014.19.4.371.
  16. Hong, H.P., Li, S.H. and Mara, T.G. (2013), "Performance of the generalized least-squares method for the Gumbel distribution and its application to annual maximum wind speeds", J. Wind Eng. Ind. Aerod., 119, 121-132. https://doi.org/10.1016/j.jweia.2013.05.012.
  17. Hong, H.P., Mara, T.G., Morris, R., Li, S.H. and Ye, W. (2014), "Basis for recommending an update of wind velocity pressures in Canadian design codes", Canadian J. Civil Eng., 41(3), 206-221. https://doi.org/10.1139/cjce-2013-0287.
  18. Hosking, J., Wallis, J. and Wood, E. (1985), "Estimation of the generalized extreme-value distribution by the method of probability-weighted moments", Technometrics, 27(3), 251-261. https://doi.org/10.1080/00401706.1985.10488049
  19. Hosking, J.R. (1990), "L-moments: Analysis and estimation of distributions using linear combinations of order statistics", J. Roy. Stat. Soc. B Met., 52(1), 105-124. https://doi.org/10.1111/j.2517-6161.1990.tb01775.x.
  20. Isyumov, N. (2012). "Alan G. Davenport's mark on wind engineering", J. Wind Eng. Ind. Aerod., 104, 12-24. https://doi.org/10.1016/j.jweia.2012.02.007.
  21. Jenkinson, A.F. (1955), "The frequency distribution of the annual maximum (or minimum) values of meteorological elements", Quart. J. Royal Meteorol. Soc., 81(348), 158-171. https://doi.org/10.1002/qj.49708134804.
  22. Kasperski, M. (2002), "A new wind zone map of Germany", J. Wind Eng. Ind. Aerod., 90(11), 1271-1287. https://doi.org/10.1016/S0167-6105(02)00257-X.
  23. Katz, R.W., Parlange, M.B. and Naveau, P. (2002), "Statistics of extremes in hydrology", Adv. Water Resoure., 25(8-12), 1287-1304. https://doi.org/10.1016/S0309-1708(02)00056-8.
  24. Kim, S., Shin, H., Joo, K. and Heo, J.H. (2012), "Development of plotting position for the general extreme value distribution", J. Hydrology, 475, 259-269. https://doi.org/10.1016/j.jhydrol.2012.09.055.
  25. Li, J., Shen, Z., Xing, S. and Gao, G. (2020), "Buffeting response of a free-standing bridge pylon in a trumpet-shaped mountain pass", Wind Struct., 30(1), 85-97. https://doi.org/10.12989/was.2020.30.1.085.
  26. Lieblein, J. (1976), "Efficient methods of extreme-value methodology (No. NEA-CSNI-R--1976-10)", Meeting of a Task Force on Problems of Rare Events in the Reliability Analysis of Nuclear Power Plants, Warrington, United Kingdom, June.
  27. Madsen, H.O., Krenk, S. and Lind, N.C. (2006), Meth. Struct. Safety, Courier Corporation, Mineola, U.S.A.
  28. Madsen, H., Rasmussen, P.F. and Rosbjerg, D. (1997), "Comparison of annual maximum series and partial duration series methods for modeling extreme hydrologic events: 1. At-site modeling", Water Resource. Res., 33(4), 747-757. https://doi.org/10.1016/j.jhydrol.2012.09.055.
  29. NRC (2010), National Building Code of Canada, Institute for Research in Construction, National Research Council of Canada, Ottawa, Canada.
  30. NRC (2015), National Building Code of Canada, Institute for Research in Construction, National Research Council of Canada, Ottawa, Canada.
  31. Pozos-Estrada, A. (2018), "A simple procedure to evaluate the wind-induced acceleration in tall buildings: An application to Mexico", Wind Struct., 27(5), 337-345. https://doi.org/10.12989/was.2018.27.5.337.
  32. Shampine, L.F. (2008), "Vectorized adaptive quadrature in MATLAB", J. Comput. Appl. Math., 211(2), 131-140. https://doi.org/10.1016/j.cam.2006.11.021.
  33. Peterka, J.A. and Shahid, S. (1998), "Design gust wind speeds in the United States", J. Struct. Eng., 124(2), 207-214. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(207).
  34. Simiu, E. and Filliben, J.J. (1975), Statistical Analysis of Extreme Winds, Department of Commerce, National Bureau of Standards, Washington, D.C, U.S.A.
  35. Singh, V.P. (1998), Entropy-Based Parameter Estimation in Hydrology, Springer Science Business Media, Dordrecht, Netherlands.
  36. Soukissian, T.H. and Tsalis, C. (2015), "The effect of the generalized extreme value distribution parameter estimation methods in extreme wind speed prediction", Nat. Hazards, 78(3), 1777-1809. https://doi.org/10.1007/s11069-015-1800-0.
  37. Tang, Q. (2020), Reliability-Based Calibration of Design Wind Load, Snow Load and Companion Load Factors Considering Climate Change Effect, Ph.D. Dissertation, University of Western Ontario, London.
  38. Vogel, R.W. and McMartin, D.E. (1991), "Probability plot goodness-of-fit and skewness estimation procedures for the Pearson type 3 distribution", Water Resources Res., 27(12), 3149-3158. https://doi.org/10.1029/91WR02116.
  39. Wang, Q.J. (1996), "Direct sample estimators of L moments", Water Resource. Res., 32(12), 3617-3619. https://doi.org/10.1029/96WR02675.