DOI QR코드

DOI QR Code

Cavitation optimization of single-orifice plate using CFD method and neighborhood cultivation genetic algorithm

  • Received : 2021.03.31
  • Accepted : 2021.10.30
  • Published : 2022.05.25

Abstract

Single-orifice plate is wildly utilized in the piping system of the nuclear power plant to throttle and depressurize the fluid of the pipeline. The cavitation induced by the single-orifice plate may cause some serious vibration of the pipeline. This study aims to find the optimal designs of the single-orifice plates that may have weak cavitation possibilities. For this purpose, a new single-orifice plate with a convergent-flat-divergent hole was modeled, a multi-objective optimization method was proposed to optimize the shape of a single-orifice plate, while computational fluid dynamics method was adopted to obtain the fluid physical quantities. The reciprocal cavitation number and the developmental integral were treated as cavitation indexes (e.g., objectives for the optimization algorithm). Two non-dominant designs ultimately achieved illustrated obvious reduction in the cavitation indexes at a Reynolds number Re = 1 ×105 defined based on fluid velocity. Besides, the sensitivity analysis and temperature effects were also performed. The results indicated that the convergent angle of the single-orifice plate dominants the cavitation behavior globally. The optimal designs of single-orifice plates result in lower downstream jet areas and lower upstream pressure. For a constant Reynolds number, the higher temperature of liquid water, the easier it is to undergo cavitation. Whereas there is a diametric phenomenon for a constant fluid velocity. Moreover, the regression models were carried out to establish the mathematical relation between temperature and cavitation indexes.

Keywords

References

  1. F. Shan, A. Fujishiro, T. Tsuneyoshi, Y. Tsuji, Particle image velocimetry measurements of flow field behind a circular square-edged orifice in a round pipe, Exp. Fluid 54 (2013) 1553. https://doi.org/10.1007/s00348-013-1553-z
  2. M.R. Harris, Orifice design, in: Orifice Plates and Venture Tube. Experimental Fluid Mechanics, Springer, Cham, 2015.
  3. B. Ebrahimi, G. He, Y. Tang, M. Franchek, D. Liu, j. Pickett, F. Springett, D. Franklin, Characterization of high pressure cavitating flow through a thick orifice plate in a pipe of constant cross section, Int. J. Therm. Sci. 114 (2017) 229-240. https://doi.org/10.1016/j.ijthermalsci.2017.01.001
  4. W.Z. Ai, J.H. Wu, Comparison on hydraulic characteristics between orifice plate and plug, J. Shanghai Jiaot. Univ. 19 (4) (2014) 476-480. https://doi.org/10.1007/s12204-014-1527-1
  5. M. Li, A. Bussonniere, M. Bronson, Z. Xu, Q. Liu, Study of venture tube geometry on the hydrodynamic cavitation for the generation of microbubbles, Miner. Eng. 132 (2019) 268-274. https://doi.org/10.1016/j.mineng.2018.11.001
  6. G.H. Gan, S.B. Riffat, Pressure loss characteristics of orifice and perforated plates, Exp. Therm. Fluid Sci. 14 (1997) 160-165. https://doi.org/10.1016/S0894-1777(96)00041-6
  7. S. Malavasi, G. Messa, U. Fratino, A. Pagano, On the pressure losses through perforated plates, Flow Meas. Instrum. 28 (2012) 57-66. https://doi.org/10.1016/j.flowmeasinst.2012.07.006
  8. S. Shaaban, On the performance of perforated plate with optimized hole geometry, Flow Meas. Instrum. 46 (2015) 44-50. https://doi.org/10.1016/j.flowmeasinst.2015.08.012
  9. A.A. Araoye, H.M. Badr, W.H. Ahmed, Investigation of fow through multi-stage restricting orifices, Ann. Nucl. Energy 104 (2017) 75-90. https://doi.org/10.1016/j.anucene.2017.02.002
  10. H. Kim, T. Setoguchi, S. Matsuo, S.R. Raghunathan, Pressure drop control using multiple orifice system in compressible pipe flows, J. Therm. Sci. 10 (4) (2001) 309-317. https://doi.org/10.1007/s11630-001-0037-2
  11. K. Angele, Prediction of cavitation in orifice plates-A novel and simple rule-of-thumb, Experimental and Computational Multiphase Flow 3 (1) (2021) 68-76. https://doi.org/10.1007/s42757-020-0059-1
  12. Y. Wang, S. Zhuang, H. Liu, Z. Zhao, M. Dular, J. Wang, Image post-processed approaches for cavitating flow in orifice plate, J. Mech. Sci. Technol. 31 (7) (2017) 3305-3315. https://doi.org/10.1007/s12206-017-0621-3
  13. M. Liu, L. Tan, S. Cao, Dynamic mode decomposition of cavitating flow around ALE 15 hydrofoil, Renew. Energy 139 (2019) 214-227. https://doi.org/10.1016/j.renene.2019.02.055
  14. W. Sun, L. Tan, Cavitation-vortex-pressure fluctuation interaction in a centrifugal pump using bubble rotation modified cavitation model under partial load, J. Fluid Eng. 142 (2020), 051206. https://doi.org/10.1115/1.4045615
  15. M. Liu, L. Tan, S. Cao, Cavitation-vortex-turbulence interaction and one-dimensional model prediction of pressure for hydrofoil ALE 15 by large eddy simulation, J. Fluid Eng. 141 (2019), 021103. https://doi.org/10.1115/1.4040502
  16. O.A.P. Cappa, T.V.R. Soeira, A.L.A. Simoes, G.B.L. Junior, J.C.S.I. Goncalves, Experimental and computational analyses for induced cavitating flows in orifice plates, Braz. J. Chem. Eng. 37 (2020) 89-99. https://doi.org/10.1007/s43153-019-00007-8
  17. X. Li, B. Huang, T. Chen, Y. Liu, S. Qiu, J. Zhao, Combined experimental and computational investigation of the caviating flow in an orifice plate with special emphasis on surrogate-based optimization method, J. Mech. Sci. Technol. 31 (1) (2017) 269-279. https://doi.org/10.1007/s12206-016-1229-8
  18. T. Tang, L. Gao, B. Li, L. Liao, Y. Xi, G. Yang, Cavitation optimization of the throttle orifice plate based on three-dimensional genetic algorithm and topology optimization, Struct. Multidiscip. Optim. 60 (2019) 1227-1244. https://doi.org/10.1007/s00158-019-02249-z
  19. A. Simpson, V.V. Ranade, Modelling of hydrodynamic cavitation with orifice: influence of different orifice designs, Chem. Eng. Res. Des. 136 (2018) 698-711. https://doi.org/10.1016/j.cherd.2018.06.014
  20. A. Erdal, H.I. Andersson, Numerical aspects of flow computations through orifices, Flow Meas. Instrum. 8 (1) (1997) 27-37. https://doi.org/10.1016/S0955-5986(97)00017-4
  21. J.A.B. Filho, A.A.C. Santos, M.A. Navarro, E. Jordao, Effect of chamfer geometry on the pressure drop of perforated plates with thin orifices, Nucl. Eng. Des. 284 (2015) 74-79. https://doi.org/10.1016/j.nucengdes.2014.12.009
  22. S.S. Manish, J.B. Joshi, A.S. Kalsi, C.S.R. Prasad, D.S. Shukla, Analysis of flow through an orifice meter: CFD simulation, Chem. Eng. Sci. 71 (2012) 300-309. https://doi.org/10.1016/j.ces.2011.11.022
  23. P. Kumar, M. Wong, M. Bing, A CFD study of wet gas metering using slotted orifice meters, Flow Meas. Instrum. 22 (2011) 33-42. https://doi.org/10.1016/j.flowmeasinst.2010.12.002
  24. F.R. Menter, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA J. 32 (8) (1994) 1598-1605. https://doi.org/10.2514/3.12149
  25. S. Watanabe, T. Hiroyasu, M. Miki, Neighborhood cultivation genetic algorithm for multi-objective optimization problems, in: Proceedings of the 4th Asia-Pacific Conference on Simulated Evolution and Learning, SEAL-2002, 2002, pp. 198-202.
  26. M. Moosa, M.H. Hekmat, Numerical investigation of turbulence characteristics and upstream disturbance of flow through standard and multi-hole orifice flowmeters, Flow Meas. Instrum. 65 (2019) 203-218. https://doi.org/10.1016/j.flowmeasinst.2019.01.002
  27. B. Ebrahimi, G. He, Y. Tang, M. Franchek, D. Liu, J. Pickett, F. Springett, D. Franklin, Characterization of high-pressure cavitating flow through a thick orifice plate in a pipe of constant cross section, Int. J. Therm. Sci. 114 (2017) 229-240. https://doi.org/10.1016/j.ijthermalsci.2017.01.001