Acknowledgement
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2019M2D2A2048296).
References
- U.S. Nuclear Regulatory Commission, Standard Review Plan for Spent Fuel Dry Storage Systems and Facilities, 2020.
- U.S. Nuclear Regulatory Commission, Load Combinations for the Structural Analysis of Shipping Casks for Radioactive Material, 1989.
- ASME B&PV Code Committee, ASME B&PV Code, Sec. III, Appendices, Nonmandatory Appendix F, Rules for Evaluation of Service Loadings with Level D Service Limits, 2019.
- ASME B&PV Code Committee, ASME B&PV Code, Sec. III, Appendices, Nonmandatory Appendix FF, Strain-Based Acceptance Criteria for Energy-Limited Events, 2019.
- S.D. Snow, D.K. Morton, R. Keating, Strain-based acceptance criteria for energy-limited events, in: Proc. ASME PVP 2009, PVP2009-77122, 2009. Prague, Czech Republic, July.
- C.C. Huang, T.Y. Wu, A study on dynamic impact of vertical concrete cask tipover using explicit finite element analysis procedures, Ann. Nucl. Energy 36 (2009) 213-221, https://doi.org/10.1016/j.anucene.2008.11.014.
- M. Lin, Y. Li, Analysis of the interactions between spent fuel pebble bed and storage canister under impact loading, Nucl. Eng. Des. 361 (2020) 110548, https://doi.org/10.1016/j.nucengdes.2020.110548.
- T.L. Teng, Y.A. Chu, F.A. Chang, H.S. Chin, M.C. Lee, The dynamic analysis of nuclear waste cask under impact loading, Ann. Nucl. Energy 30 (2003) 1473-1485, https://doi.org/10.1016/S0306-4549(03)00080-X.
- Y.S. Lee, C.H. Ryu, H.S. Kim, Y.J. Choi, A study on the free drop impact of a cask using commercial FEA codes, Nucl. Eng. Des. 235 (2005) 2219-2226, https://doi.org/10.1016/j.nucengdes.2005.03.009.
- K. Sharma, D.N. Pawaskar, A. Guha, R.K. Singh, Optimization of cask for transport of radioactive material under impact loading, Nucl. Eng. Des. 273 (2014) 190-201, https://doi.org/10.1016/j.nucengdes.2014.03.021.
- D.H. Kim, K.S. Seo, J.C. Lee, K.S. Bang, C.H. Cho, S.J. Lee, C.Y. Baeg, Finite element analyses and verifying tests for a shock-absorbing effect of a pad in a spent fuel storage cask, Ann. Nucl. Energy 34 (2007) 871-882, https://doi.org/10.1016/j.anucene.2007.04.012.
- K.S. Kim, J.S. Kim, K.S. Choi, T.M. Shin, H. Do Yun, Dynamic impact characteristics of KN-18 SNF transport cask - Part 1: an advanced numerical simulation and validation technique, Ann. Nucl. Energy 37 (2010) 546-559, https://doi.org/10.1016/j.anucene.2009.12.023.
- K.S. Kim, J.S. Kim, K.S. Choi, T.M. Shin, H. Do Yun, Dynamic impact characteristics of KN-18 SNF transport cask - Part 2: sensitivity analysis of modeling and design parameters, Ann. Nucl. Energy 37 (2010) 560-571, https://doi.org/10.1016/j.anucene.2009.12.024.
- C.Y. Lin, T.Y. Wu, C.C. Huang, Nonlinear dynamic impact analysis for installing a dry storage canister into a vertical concrete cask, Int. J. Pres. Ves. Pip. 131 (2015) 22-35, https://doi.org/10.1016/j.ijpvp.2015.04.006.
- T.Y. Wu, H.Y. Lee, L.C. Kang, Dynamic response analysis of a spent-fuel dry storage cask under vertical drop accident, Ann. Nucl. Energy 42 (2012) 18-29, https://doi.org/10.1016/j.anucene.2011.12.016.
- S.P. Kim, J. Kim, D. Sohn, H. Kwon, M. Shin, Stress-based vs. Strain-based safety evaluations of spent nuclear fuel transport casks in energy-limited events, Nucl. Eng. Des. 355 (2019) 110324, https://doi.org/10.1016/j.nucengdes.2019.110324.
- G.R. Johnson, W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech. 21 (1985) 31-48, https://doi.org/10.1016/0013-7944(85)90052-9.
- G.R. Cowper, P.S. Symonds, Strain-Hardening and Strain-Rate Effects in the Impact Loading of Cantilever Beams, Brown Univ Provid. Ri., 1957.
- F.J. Zerilli, R.W. Armstrong, Dislocation-mechanics-based constitutive relations for material dynamics calculations, J. Appl. Phys. Appl. Phys. 61 (1987) 1816-1825, https://doi.org/10.1063/1.338024.
- H. Huh, W.J. Kang, Crash-worthiness assessment of thin-walled structures with the high-strength steel sheet, Int. J. Veh. Des. 30 (2002) 1-21, https://doi.org/10.1504/IJVD.2002.002022.
- H. Zhao, G. Gary, The testing and behaviour modelling of sheet metals at strain rates from 10-4 to 104 s-1, Mater. Sci. Eng. 207 (1996) 46-50, https://doi.org/10.1016/0921-5093(95)10017-2.
- J.M. Seo, S.S. Jeong, Y.J. Kim, J.W. Kim, C.Y. Oh, H. Tokunaga, T. Kumagai, Modification of the Johnson-Cook Model for the Strain Rate Effect on Tensile Properties of 304/316 Austenitic Stainless Steels, J. Press. Vessel Technol., 2022, https://doi.org/10.1115/1.4050833 to be published.
- J.Q. Tan, M. Zhan, S. Liu, T. Huang, J. Guo, H. Yang, A modified Johnson-Cook model for tensile flow behaviors of 7050-T7451 aluminum alloy at high strain rates, Mater. Sci. Eng. 631 (2015) 214-219, https://doi.org/10.1016/j.msea.2015.02.010.
- G. Geng, D. Ding, L. Duan, H. Jiang, A modified Johnson-Cook model of 6061-T6 Aluminium profile, Aust. J. Mech. Eng. (2020) 1-11, https://doi.org/10.1080/14484846.2020.1721966,00.
- T. Kim, H. Dho, C.Y. Baeg, G.U. Lee, Preliminary safety analysis of criticality for dual-purpose metal cask under dry storage conditions in South Korea, Nucl. Eng. Des. 278 (2014) 414-421, https://doi.org/10.1016/j.nucengdes.2014.08.008.
- J.H. Ko, J.H. Park, I.S. Jung, G.U. Lee, C.Y. Baeg, T.M. Kim, Shielding analysis of dual purpose casks for spent nuclear fuel under normal storage conditions, Nucl. Eng. Technol. 46 (2014) 547-556, https://doi.org/10.5516/NET.08.2013.039.
- Dassault Systemes, SIMULIA User Assistance, Dassault Systems, Simulia Corp. Provid. RI, 2018, 2018.