DOI QR코드

DOI QR Code

Development of Automated Welding System for Construction: Focused on Robotic Arm Operation for Varying Weave Patterns

  • Doyun Lee (Department of Civil, Construction, and Environmental Engineering, North Carolina State University) ;
  • Guang-Yu Nie (Department of Civil, Construction, and Environmental Engineering, North Carolina State University) ;
  • Aman Ahmed (Department of Electrical and Computer Engineering, North Carolina State University) ;
  • Kevin Han (Department of Civil, Construction, and Environmental Engineering, North Carolina State University)
  • 발행 : 2022.06.01

초록

Welding is a significant part of the construction industry. Since most high-rise building construction structures rely on a robust metal frame welded together, welding defect can damage welded structures and is critical to safety and quality. Despite its importance and heavy usage in construction, the labor shortage of welders has been a continuous challenge to the construction industry. To deal with the labor shortage, the ultimate goal of this study is to design and develop an automated robotic welding system composed of a welding machine, unmanned ground vehicle (UGV), robotic arm, and visual sensors. This paper proposes and focuses on automated weaving using the robotic arm. For automated welding operation, a microcontroller is used to control the switch and is added to a welding torch by physically modifying the hardware. Varying weave patterns are mathematically programmed. The automated weaving is tested using a brush pen and a ballpoint pen to clearly see the patterns and detect any changes in vertical forces by the arm during weaving. The results show that the weave patterns have sufficiently high consistency and precision to be used in the actual welding. Lastly, actual welding was performed, and the results are presented.

키워드

참고문헌

  1. Ali, M. H., Aizat, K., Yerkhan, K., Zhandos, T. & Anuar, O. (2018). Vision-based Robot Manipulator for Industrial Applications. International Conference on Robotics and Smart Manufacturing (RoSMa2018), 133, 205-212. https://doi.org/10.1016/j.procs.2018.07.025 
  2. American Welding Society. (2005). AWS B2.1 - Specification for Welding Procedure and Performance Qualification. 
  3. Asadi, K., Jain, R., Qin, Z., Sun, M., Noghabaei, M., Cole, J., Han, K. & Lobaton, E. (2019). Vision-Based Obstacle Removal System for Autonomous Ground Vehicles Using a Robotic Arm. Computing in Civil Engineering, 328-335. https://doi.org/10.48550/arXiv.1901.08180 
  4. Chen, Y., He, Y., Chen, H., Zhang, H. & Chen, S. (2014). Effect of weave frequency and amplitude on temperature field in weaving welding process. International Journal of Advanced Manufacturing Technology, 75(5-8), 803-813. https://doi.org/10.1007/s00170-014-6157-0 
  5. Chu, B., Kim, D. & Hong, D. (2008). Robotic automation technologies in Construction: A Review. International Journal of Precision Engineering and Manufacturing, 9(3), 85-91. https://www.koreascience.or.kr/article/JAKO200824556527779.pdf 
  6. Chu, H. H. & Wang, Z. Y. (2016). A vision-based system for post-welding quality measurement and defect detection. International Journal of Advanced Manufacturing Technology, 86(9-12), 3007-3014. https://doi.org/10.1007/s00170-015-8334-1 
  7. Fang, B., Ma, X., Wang, J. & Sun, F. (2020). Vision-based posture-consistent teleoperation of robotic arm using multi-stage deep neural network. Robotics and Autonomous Systems, 131. https://doi.org/10.1016/j.robot.2020.103592 
  8. Instructional Materials Service. (2002). ARC WELDING - BASIC STEPS. https://pdfslide.net/documents/arc-weldingbasic-steps-reading.html 
  9. Iowa Valley Community College. (2021, March 11). What are the 4 Types of Welding? https://www.iavalley.edu/blog/2021/03/11/what-are-the-4-types-of-welding/ 
  10. Kim, K. Y. & Ahmed, F. (2018). Semantic weldability prediction with RSW quality dataset and knowledge construction. Advanced Engineering Informatics, 38, 41-53. https://doi.org/10.1016/j.aei.2018.05.006 
  11. Koestler, A. (2012). Terms, Joints,& Edge Preparation. Metal Arts Press. https://www.metalartspress.com/books/chapters/chapter-3-terms-joints-edge-preparation 
  12. Lee, D., Nie, G. & Han, K. (2022). (Accepted) Real-time and Automatic Detection of Welding Joints Using Deep Learning. Construction Research Congress 2022: Project Management and Controls, Materials, and Contracts. 
  13. Lombardi, D. A., Pannala, R., Sorock, G. S., Wellman, H., Courtney, T. K., Verma, S. & Smith, G. S. (2005). Welding related occupational eye injuries: A narrative analysis. Injury Prevention, 11(3), 174-179. https://doi.org/10.1136/ip.2004.007088 
  14. Mao, Z. W., Pan, J. L. & Zhang, H. (2010). Mobile welding robot system based on rotating arc sensor applied for large fillet welding seam tracking. 6th International Conference on Natural Computation, ICNC 2010, 1, 394-397. https://doi.org/10.1109/ICNC.2010.5583304 
  15. Moore, A. J. (2010). Essential vs. Non-essential Variables. https://app.aws.org/itrends/2010/07/it201007/it0710-20.pdf 
  16. Nagata, M., Baba, N., Tachikawa, H., Shimizu, I. & Aoki, T. (1997). Steel Frame Welding Robot Systems and Their Application at the Construction Site. Microcomputers in Civil Engineering, 12, 15-30. https://doi.org/https://doi.org/10.1111/0885-9507.00043 
  17. Red-D-Arc Welderentals. (2020, May 27). Welding in the Construction Industry. https://blog.red-d-arc.com/welding/welding-in-construction/ 
  18. Sekkat, H., Tigani, S., Saadane, R. & Chehri, A. (2021). Vision-based robotic arm control algorithm using deep reinforcement learning for autonomous objects grasping. Applied Sciences (Switzerland), 11(17). https://doi.org/10.3390/app11177917 
  19. Shaikat, A. S., Akter, S. & Salma, U. (2020). Computer Vision Based Industrial Robotic Arm for Sorting Objects by Color and Height. Journal of Engineering Advancements, 01(04), 116-122. https://doi.org/10.38032/ jea.2020.04.002 
  20. Tavares, P., Costa, C. M., Rocha, L., Malaca, P., Costa, P., Moreira, A. P., Sousa, A. & Veiga, G. (2019). Collaborative Welding System using BIM for Robotic Reprogramming and Spatial Augmented Reality. Automation in Construction, 106. https://doi.org/10.1016/j.autcon.2019.04.020 
  21. Tradesmen International. (2019, June 3). What Is the Welder Shortage? https://www.tradesmeninternational.com/construction-management/welder-shortage/ 
  22. Universal Robots. (2022). Real-Time Data Exchange (RTDE). https://s3-eu-west-1.amazonaws.com/ur-support-site/22229/Real_Time_Data_Exchange_(RTDE)_Guide.pdf 
  23. Wen, Z., Wang, Y., Luo, J., Kuijper, A., Di, N. & Jin, M. (2017). Robust, fast and accurate vision-based localization of a cooperative target used for space robotic arm. Acta Astronautica, 136, 101-114. https://doi.org/10.1016/j.actaastro.2017.03.008 
  24. Zhan, X., Liu, X., Wei, Y., Chen, J., Chen, J. & Liu, H. (2017). Microstructure and property characteristics of thick Invar alloy plate joints using weave bead welding. Journal of Materials Processing Technology, 244, 97-105. https://doi.org/10.1016/j.jmatprotec.2017.01.014