DOI QR코드

DOI QR Code

CNC 자동선반을 이용한 SCM415강의 소형 깊은 내경홀 가공 특성 연구

A Study on the Machining Characteristics of SCM415 Steel with Small Deep Inner Diameter Holes Using CNC Automatic Lathes

  • 최철웅 (한국폴리텍대학 기계시스템과) ;
  • 김진수 (한국폴리텍대학 컴퓨터응용기계과)
  • Choi, Chul-Woong (College of Computer Application Mechanical, Korea Polytechnic UNIV.) ;
  • Kim, Jin-su (College of Mechanical System, Korea Polytechnic UNIV.)
  • 투고 : 2021.12.22
  • 심사 : 2022.03.21
  • 발행 : 2022.04.30

초록

Small-scale production is increasing, and the manufacturing industry is gradually changing into a smart manufacturing industry. Therefore, research on securing optimal cutting conditions for factors affecting machining precision during cutting is very important. Therefore, the purpose of this study is to After machining the inner diameter hole of SCM415 steel with a cermet tool on a CNC automatic lathe, the surface roughness, dimensional accuracy, and dimensional straightness are measured according to the feed rate to analyze the machining characteristics and suggest optimal cutting conditions. The test material was cut using a cermet tool for secondary cutting after a round bar with a diameter of 20 mm was mounted on a CNC automatic lathe. The cutting length was fixed at 0.5 mm, and the cutting speed was fixed at 3200 rpm. When the feed rate was changed to 0.05, 0.1, and 0.15 mm/rev, the respective surface roughness during the 15th test was measured. Consequently, The lower the feed rate, the better is the surface roughness. In addition, the optimum cutting conditions for SCM415 steel were observed to be the most ideal cutting conditions than the condition of 0.05 mm/rev at a cutting speed of 3,200 rpm and a feed rate of 0.1 mm/rev.

키워드

참고문헌

  1. Lee, Y. C., Kwak, T. S., Kim, G. N., Lee, J. R., "High-speed Machining Technology using CNC Machining Center Equipped with Attachment Type High-Speed Spindle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 152-158, 2012.
  2. Doo, S., Hong, J. W., Suh, N. S., "A Study on the Cutting Force and Machining Error on the Inclined Plane in Ball-end Milling", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 7, pp. 112-119, 2001.
  3. Choi, J. G., Kim, H. S. and Kim, S. C., "A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes", Journal of the Korean society of machine tool engineers, Vol. 13, No. 3, pp. 8-14, 2004.
  4. Chung, M. S., "A Study on Transition of Dimension Error and Surface Precision in High Speed Machining of AI-alloy", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 9, No. 3, pp. 96-102, 2000.
  5. Yoon, J. H., Seo, S. W. and Lee, H. C., "A Study on the Effect of Dimensional Errors and Roundness in High Speed Cylindrical Machining of Al-alloy", Journal of the Korean society of machine tool engineers Vol. 10, No. 5, pp. 17-27, 2000.
  6. Shin, M. J., "A Study on the Machined Characteristics of SCM415 Steel Cutting", A Thesis for a Master, Kyeongnam National University, Republic of Korea, 2013.
  7. Hong. B. Y.(2015), " Mechanical load and cutting shape in turning operation", 10, May, 2015 from http://kidd.co.kr/news/179794
  8. Kim, W. I., Lee, Y, K., Wang, D. H., Kim, G. N., Lee, S. B., "The Influence of Surface Roughness according to Density of Cutting Fluids in Turning Operation", A Thesis for a Master, Kyeongnam National University, Republic of Korea, 2013.