DOI QR코드

DOI QR Code

저분진 케이블 POD 생산을 위한 히팅 롤러의 열전도 분석

Thermal Conductivity Analysis of Heating Rollers for Cable Low Dust POD Production

  • 송영준 (경상국립대학교 대학원 기계항공공학부) ;
  • 임종학 (경상국립대학교 대학원 기계항공공학부) ;
  • 변영일 (경상국립대학교 대학원 기계항공공학부) ;
  • 홍성민 (L 전선) ;
  • 정영환 (L 전선) ;
  • 박장용 (삼원절연) ;
  • 송철기 (경상국립대학교 기계공학부, 공학연구원)
  • 투고 : 2021.09.16
  • 심사 : 2021.10.30
  • 발행 : 2022.01.31

초록

The heating roller of an actual pulse output device (POD) production facility is composed of a steel roller and a rubber roller. The time to reach a specific temperature and the temperature distribution on the roller surface were analyzed and compared according to the change in the number of cartridge heaters inside the heating roller. In this analysis, a steady-state thermal analysis of a steel roller was performed for the cases of a 5-cartridge heater and 9-cartridge heater. Finite element analysis was applied with reference to the surface temperature data of the heating roller during operation and the calorific value of the cartridge heater. Using the 9-cartridge heater, faster target temperature achievement and more uniform temperature distribution were confirmed than for the 5-cartridge heater.

키워드

과제정보

본 연구는 한국산업기술진흥원 2020년도 소재·부품·장비·양산성능평가지원사업과 경상국립대학교 대학원 기계항공공학부의 지원을 받아 수행되었음.

참고문헌

  1. Lee, Y. U., "A Study on the Cooling Performance of Hot Forming Process using Finite Element Analysis", Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 5, pp. 711-717, 2017. https://doi.org/10.17958/KSMT.19.5.201710.711
  2. Min, B. K., Park, C. H., and Chung, S. C., "Thermal Analysis of a Ball Screw by ADI Finite Difference Method," The Korean Society of Mechanical Engineers A, Vol. 42, No. 11, pp. 975-984, 2018. https://doi.org/10.3795/KSME-A.2018.42.11.975
  3. Yoon, J. I., "Predicting Thermo-mechanical Characteristics from the 2nd Phase Fraction of AI-AIN Composites for LED Heat Sinks with FEM," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 5, pp. 137-142, 2018. https://doi.org/10.14775/ksmpe.2018.17.5.137
  4. Song, M. J., Cha, B. S., Hong, S. K., and Ko, Y. B., "Optimum design of injection mold heater ofr uniform curing of LSR seal for waterproof connector," Journal of the Korea Academy Industrial Cooperation Society, Vol. 18, No. 7, pp. 310-315, 2017. https://doi.org/10.5762/KAIS.2017.18.1.310
  5. Choi, D. S., and Kang, H. B., "Finite Element Analysis of Multistage Hot Forging Process During Mold Cooling," Journal of the Korean Society Manufacturing Process Engineers, Vol. 19, No. 5, pp. 75-81, 2020. https://doi.org/10.14775/ksmpe.2020.19.05.075
  6. Jung, S. H., Shin, Y. I., and Song, C. K., "Finite Element Analysis of an Elongation Rolling Process for Manufacturing Seamless Pipes," Journal of the Korean Society for Precision Engineering, Vol. 31, No. 10, pp. 923-928, 2014. https://doi.org/10.7736/KSPE.2014.31.10.923
  7. Kim, K. S., Bang, S. K., Seo, I. H., Lee. S. Y., and Yi. C. S., "Thermal and Flow Analysis of Organic Rankine Cycle System Pipe Line for 250 kW Grade Waste Gas Heat Recovery," Journal of Korean Society of Manufacturing Process Engineers, Vol. 18, No. 4, pp. 26-33, 2019.
  8. Kang, C. W., Kim, T. J., and Lee, C. W., "Numerical Analysis on the Characteristics of Thermal Flow in an Automobile Radiator," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 6, pp. 55-61, 2019. https://doi.org/10.14775/ksmpe.2019.18.6.055