Acknowledgement
본 연구는 과학기술정보통신부 한국건설기술연구원 연구운영비지원(주요사업)사업으로 수행되었습니다(과제번호 20220124-001, 극한건설 환경 구현 인프라 및 TRL6 이상급 극한건설 핵심기술 개발).
References
- Agrawal, D. (2006), "Microwave Sintering of Ceramics Composites and Metallic Materials and Melting of Glasses", Trans. Indian Ceram. Soc., Vol.65, No.3, pp.129-144. https://doi.org/10.1080/0371750X.2006.11012292
- Ahn, S.H. and Lee, W.S. (2020), "Uniform Microwave Heating System Design and Evaluation with an Orthogonally Slot-loaded Array Waveguide", Microw. Opt. Technol. Lett., Vol.62, pp.3419- 3424. https://doi.org/10.1002/mop.32467
- Ahn, S.H., Jeong, C.H., Lim, D.M., and Lee, W.S. (2020), "Kilowattlevel Power-controlled Microwave Applicator with Multiple Slotted Waveguides for Improving Heating Uniformity", IEEE Trans. Microw. Theory Tech., Vol.68, No.7, pp.2867-2875. https://doi.org/10.1109/tmtt.2020.2977645
- ASTM International (2019), "Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass", ASTM International, West Conshohocken, PA, USA.
- Bae, S.H., Jeong, M.G., Kim, J.H., and Lee, W.S. (2017), "A Continuous Power-controlled Microwave Belt Drier Improving Heating Uniformity", IEEE Microw. Wirel. Compon. Lett., Vol.27, No.5, pp.527-529. https://doi.org/10.1109/LMWC.2017.2690849
- Balla, V.K., Roberson, L.B., O'Connor, G.W., Trigwell, S., Bose, S., and Bandyopadhyay, A. (2012), "First Demonstration on Direct Laser Fabrication of Lunar Regolith Parts", Rapid Prototyping J., Vol.18, No.6, pp.451-457. https://doi.org/10.1108/13552541211271992
- Bansal, A. and Sharma, A.K. (2014), "3D Electromagnetic Field Simulation of Silicon Carbide and Grap hite Plate in Microwave Oven", Int. J. Mech. Eng. Rob. Res., Specieal Issue, Vol.1, No.1, pp.7-12. https://doi.org/10.14445/23488360/IJME-V1I2P102
- Brent, S. (2019), "Principles for a Practical Moon base", Acta Astronaut., Vol.160, pp.116-124. https://doi.org/10.1016/j.actaastro.2019.04.018
- Christian, S., Lukas, W., and Thomas, R. (2018), "Sustainable Challenges on the Moon", Curr. Opin. Green Sust., Vol.9, pp. 8-12. https://doi.org/10.1016/j.cogsc.2017.10.002
- Colozza, A.J (1991), "Analysis of Lunar Regolith Thermal Energy Storage", Lewis Research Center Group in Sverdrup Technology, Inc., NASA Contractor Report 189073, Cleveland, Ohio, USA.
- Comsol Inc, Comsol Multiphysics User's Manual Ver. 5.5, 2020. USA.
- Cremers, C.J. (2012), "Thermophysical Properties of Apollo 14 Fines", J. Geophys. Res., Vol.80, No.32, pp.4466-4470. https://doi.org/10.1029/JB080i032p04466
- Fateri, M. and Gebhardt, A. (2015), "Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-site Manufacturing Applications", Int. J. Appl. Ceram. Tec., Vol.12, No.1, pp.46-52. https://doi.org/10.1111/ijac.12326
- Gao, X., Liu, X., Yan, P., Li, X., and Li, H. (2019), "Numerical Analysis and Optimization of the Microwave Inductive Heating Performance of Water Film", Int. j. heat mass transf., Vol.139, pp.17-30. https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.122
- Goulas, A., Binner, J.G.P., Harris, R.A., and Friel, R.J. (2017), "Assessing Extraterrestrial Regolith Material Simulants for In-situ Resource Utilisation based 3D Printing", Appl. Mater. Today, Vol.6, pp.54-61. https://doi.org/10.1016/j.apmt.2016.11.004
- Halim, S.A. (2016), "Biomass pyrolysis using microwave technology", Univ. Sheffield, PhD thesis, Sheffield, UK.
- Halim, S.A. and Swithenbank, J. (2019), "Simulation Study of Parameters Influencing Microwave Heating of Biomass", J. Energy Inst., Vol.92, pp.1191-1212. https://doi.org/10.1016/j.joei.2018.05.010
- Hintze, P.E., Curran, J., and Back, T. (2009), "Lunar Surface Stabilization via Sintering or the Use of Heat Cured Polymers", 47th AIAA Aerospace Science Meeting including The New Horizons Forum and Aerospace Exposition.
- Jeong, C.H., Ahn, S.H., and Lee, W.S. (2019), "Four-kilowatt Homogeneous Microwave Heating System Using a Power-controlled Phase-shifting Mode for Improved Heating Uniformity", Electron. Lett., Vol.55, No.8, pp.465-467. https://doi.org/10.1049/el.2019.0060
- Jin, H., Kim, Y., Ryu, B.H., and Lee, J. (2020), "Experimental Assessment of Manufacturing System Efficiency and Hydrogen Reduction Reaction for Fe(0) Simulation for KLS-1", J. Korean Geotech. Soc., Vol.36, No.8, pp.17-25. https://doi.org/10.7843/KGS.2020.36.8.17
- Jin, H., Lee, J., Ryu, B.H., Shin, H.S., and Kim, Y.J. (2021), "The Experimental Assessment of Influence Factors on KLS-1 Microwave Sintering", J. Korean Geotech. Soc., Vol.37, No.2, pp.5-17. https://doi.org/10.7843/KGS.2021.37.2.5
- Kang, Y. and Morita, K. (2006), "Thermal Conductivity of the CaO-Al2O3-SiO2 system", ISIJ Int., Vol.46, No.3, pp.420-426. https://doi.org/10.2355/isijinternational.46.420
- Kim, Y.J., Ryu, B.H., Jin, H., Lee, J., and Shin, H.S. (2021), "Microstructural, Mechanical, and Thermal Properties of Microwave-sintered KLS-1 Lunar Regolith Simulant", Ceram. Int., Vol.47, pp.26891-26897. https://doi.org/10.1016/j.ceramint.2021.06.098
- Langseth, M.G., Clark, S.P., Chute, J.L., Keihm, S.J., and Wechsler, A.E. (1972), "The Apollo 15 Lunar heat-flow measurement", The Moon, Vol.4, No.3, pp.390-410. https://doi.org/10.1007/BF00562006
- Li, S., Lucey, P.G., Milliken, R.E., Hayne, P.O., Fisher, E., Williams, J.P., Hurley, D.M., and Elphic, R.C. (2018), "Direct Evidence of Surface Exposed Water Ice in the Lunar Polar Regions", Proc. Nat. Acad. Sci., USA.
- Lim, S., Anand, M., and Rouse, T. (2015), "Estimation of Energy and Material Use of Sintering-based Construction for a Lunar Outpost - with the Example of SinterHab Module Design", 46th Lunar. Planet. Sci. Conf., UK, No. 1076.
- Lim, S., Prabhu, V.L., Anand, M., and Taylor, L.A. (2017), "Extraterrestrial Construction Processes - Advancements, Opportunities and Challenges", Adv. Space Res., Vol.60, No.7, pp.1413-1429. https://doi.org/10.1016/j.asr.2017.06.038
- Lim, S. and Anand, M. (2019), "Numerical Modelling of the Microwave Heating behaviour of Lunar Regolith", Planet Space Sci., Vol.179, No.104723. https://doi.org/10.1016/j.pss.2019.104723
- Lin, T.D., Skaar, S.B., and O'Gallagher, J.J. (1997), "Proposed Remote-control, Solar-powered Concrete Production Experiment on the Moon", J. Aerospace Eng., Vol.10, No.2, pp.104.109. https://doi.org/10.1061/(ASCE)0893-1321(1997)10:2(104)
- Meurisse, A., Cowley, A., Cristoforetti, S., Makaya, A., Pambaguian, L., and Sperl, M. (2018), "Solar 3D Printing of Lunar Regolith", Acta Astronaut., Vol.152, pp.800-810. https://doi.org/10.1016/j.actaastro.2018.06.063
- Nozette, S., Lichtenberg, C.L., Spudis, P., Bonner, R., Ort, W., Malaret, E., Robinson, M., and Shoemaker, E.M. (1996), "The Clementine Bistatic Radar Experiment", Sci., Vol.274, No.5292, pp.1495-1498. https://doi.org/10.1126/science.274.5292.1495
- Nozette, S., Spudis, P.D., Robinson, M.S., Bussey, D.B.J., Lichtenberg, C., and Bonner, R. (2001), "Integration of Lunar Polar Remotesensing Data Sets: Evidence for Ice at the Lunar South Pole", J. Geophys. Res.-Planet, Vol.106, No.E10, pp.23253-23266. https://doi.org/10.1029/2000JE001417
- Pert, E., Carmel, Y., Birnboim, A., Olorunyolemi, T., Gershon, D., Calame, J., Lloyd, I.K., and Wilson Jr., O.C. (2001), "Temperature Measurements during Microwave Processing: The Significance of Thermocouple Effects", J. Am. Ceram. Soc., Vol.84, No.9, pp. 1981-1986. https://doi.org/10.1111/j.1151-2916.2001.tb00946.x
- Ryu, B.H., Baek, Y., Kim, Y.S., and Chang, I. (2015), "Basic Study for a Korean Lunar Simulant (KLS-1) Development", J. Korean Geotech. Soc., Vol.31, No.7, pp.53-63. https://doi.org/10.7843/KGS.2015.31.7.53
- Ryu, B.H., Wang, C.C., and Chang, I. (2018), "Development and Geotechnical Engineering Properties of KLS-1 Lunar Simulant", J. Aerosp. Eng., Vol.31, No.1, pp.0417083-1-11.
- Sato, M., Muton, T., Shimotuma, T., Ida, K., Motojima, O., Fujiwara, M., Takayama, S., Mizuno, M., Obata, S., Ito, K., Hirai, T., and Shimada, T. (2003), "Recent Development of Microwave Kilns for Industries in Japan", Proceedings of 3rd World Congress on Microwave and Radio Frequency Applications.
- Sauerborn, M., Neumann, A., Seboldt, W., and Diekmann, B. (2004), "Solar Heated Vacuum Pyrolysis of Lunar Soil", 35th COSPAR Scientific Assembly.
- Schreiner, S.S., Dominguez, J.A., Sibille, L., and Hoffman, J.A. (2016), "Thermophysical Property Models for Lunar Regolith", Adv. Space Res., Vol.57, No.5, pp.1209-1222. https://doi.org/10.1016/j.asr.2015.12.035
- Sikalidis, C. (2011), "Advances in ceramics: Synthesis and characterization, processing and specific applications", IntechOpen.
- Taylor, L.A. and Meek, T.T. (2005), "Microwave Sintering of Lunar Soil: Properties, Theory, and Practice", J. Aerosp. Eng., Vol.18, No.3, pp.188-196. https://doi.org/10.1061/(ASCE)0893-1321(2005)18:3(188)
- Taylor, L.A., Pieters, C., Patchen, A., Taylor, D.-H.S., Morris, R.V., Keller, L.P., and McKay, D.S. (2010), "Mineralogical and Chemical Characterization of Lunar Highland Soils: Insights into the Space Weathering of Soils on Airless Bodies", J. Geophys. Res.-Planet, Vol.115, E02002, pp.1-14.
- Weiren, W., Chunlai, L., Wei, Z., Hongbo, Z., Jianjun, L., Weibin, W., Yan, S., Xin, R., Jun, Y., Dengyun, Y., Guangliang, D., Chi, W., Zezhou, S., Enhai, L., Jianfeng, Y., and Ziyuan, O. (2019), "Lunar Farside to be Explored by Chang'e-4", Nat. Geosci., Vol.12, pp.222-223. https://doi.org/10.1038/s41561-019-0341-7