DOI QR코드

DOI QR Code

Potential use of local waste scoria as an aggregate and SWOT analysis for constructing structural lightweight concrete

  • Islam, A.B.M. Saiful (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University) ;
  • Walid, Walid (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University) ;
  • Al-Kutti, A. (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University) ;
  • Nasir, Muhammad (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University) ;
  • Kazmi, Zaheer Abbas (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University) ;
  • Sodangi, Mahmoud (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University)
  • Received : 2021.06.12
  • Accepted : 2022.01.03
  • Published : 2022.06.25

Abstract

This study aims to investigate the influence of scoria aggregate (SA) and silica fume (SF) as a replacement of conventional aggregate and ordinary Portland cement (OPC), respectively. Three types of concrete were prepared namely normal weight concrete (NWC) using limestone aggregate (LSA) and OPC (control specimen), lightweight concrete (LWC) using SA and OPC, and LWC using SA and partial SF (SLWC). The representative workability and compressive strength properties of the developed concrete were evaluated, and the results were correlated with non-destructive ultrasonic pulse velocity and Schmidt hammer tests. The LWC and SLWC yielded compressive strength of around 30 MPa and 33 MPa (i.e., 78-86% of control specimens), respectively. The findings indicate that scoria can be beneficially utilized in the development of structural lightweight concrete. Present renewable sources of aggregate will preserve the natural resources for next generation. The newly produced eco-friendly construction material is intended to break price barriers in all markets and draw attraction of incorporating scoria based light weight construction in Saudi Arabia and GCC countries. Findings of the SWOT analysis indicate that high logistics costs for distributing the aggregates across different regions in Saudi Arabia and clients' resistant to change are among the major obstacles to the commercialized production and utilization of lightweight concrete as green construction material. The findings further revealed that huge scoria deposits in Saudi Arabia, and the potential decrease in density self-weight of structural elements are the major drivers and enablers for promoting the adoption of lightweight concrete as alternative green construction material in the construction sector.

Keywords

Acknowledgement

The authors are thankful to the Deanship of Scientific Research (DSR) (Project 2017-212-Eng), Imam Abdulrahman Bin Faisal University (IAU) for assisting in the study.

References

  1. ACI Committee (2014), Building code requirements for structural concrete (ACI 318M-14) and commentary (ACI 318RM-14).
  2. Ahmmad, R., Jumaat, M.Z., Bahri, S. and Islam, A.B.M.S. (2014), "Effect of water-cement ratios on oil palm shell (OPS) lightweight concrete for ecofriendly construction", Int. J. Adv. Comput. Sci. Applicat., 4(4), 246-249.
  3. Al-Azzawi, A.A. and Al-Aziz, M. (2018), "Behavior of reinforced lightweight aggregate concrete hollowcore slabs", Comput. Concrete, Int. J., 21(2), 117-126. https://doi.org/10.12989/cac.2018.21.2.117
  4. Ali, T.K.M. (2018), "Modulus of Elasticity of Lightweight Concrete Containing Different Ratios of PET as an Aggregate and Fiber", J. Mater. Eng. Struct., 5(1), 51-72.
  5. Al-Kutti, W., Saiful Islam, A.B.M. and Nasir, M. (2019a), "Potential use of date palm ash in cement-based materials", J. King Saud Univ. - Eng. Sci., 31(1), 26-31. https://doi.org/10.1016/j.jksues.2017.01.004
  6. Al-Kutti, W.A., Islam, A.B.M.S. and Nasir, M. (2019b), US Patent No. 10,221,097 B1, United States Patent & Trademark Office.
  7. Bell, G.G. and Rochford, L. (2016), "Rediscovering SWOT's integrative nature: A new understanding of an old framework", Int. J. Manag. Edu., 14(3), 310-326. https://doi.org/10.1016/j.ijme.2016.06.003
  8. Bideci, A., Bideci, O.S., Oymael, S., Gultekin, A.H. and Yildirim, H. (2017), "Lightweight aggregates coated with colemanite", Comput. Concrete, Int. J., 19(5), 451-455. https://doi.org/10.12989/cac.2017.19.5.451
  9. BS8110 (1997), Structural use of concrete, Part I: Code of practice for design and construction, British Standards Institution, UK.
  10. Chandra, S. and Berntsson, L. (2002), Lightweight Aggregate Concrete, Elsevier.
  11. Devi, K., Saini, B. and Aggarwal, P. (2018), "Effect of accelerators with waste material on the properties of cement paste and mortar", Comput. Concrete, Int. J., 22(2), 153-159. https://doi.org/10.12989/cac.2018.22.2.153
  12. Duzgun, O.A., Gul, R. and Aydin, A.C. (2005), "Effect of steel fibers on the mechanical properties of natural lightweight aggregate concrete", Mater. Lett., 59(27), 3357-3363. https://doi.org/10.1016/j.matlet.2005.05.071
  13. Fares, G., Alhozaimy, A., Al-Negheimish, A. and Alawad, O.A. (2014), "Effect of Powdered Scoria Rocks on the Fresh and Hardened Properties of High Performance Concrete", Proceedings of ATINER's Conference Paper Series CIV2014-0974.
  14. Hosen, M.A., Jumaat, M.Z., Alengaram, U.J., Sulong, N.H.R. and Islam, A.B.M.S. (2019), "Structural performance of lightweight concrete beams strengthened with side-externally bonded reinforcement (SEBR) technique using CFRP fabrics", Compos. Part B: Eng., 176, 107323. https://doi.org/10.1016/j.compositesb.2019.107323
  15. Huda, M.N., Jumaat, M.Z., Islam, A.B.M.S. and Soeb, M.R. (2015), "Ductility Performnce of High Strength Lightweight Concrete Produced from a Mixture of Oil Palm Shell and Palm Oil Clinker", Proceedings of First International Conference on Advances in Civil Infrastructure and Construction Materials, MIST, Dhaka, Bangladesh.
  16. Huda, M.N., Jumat, M.Z.B. and Islam, A.B.M.S. (2016), "Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam", Constr. Build. Mater., 127, 18-25 http://doi.org/10.1016/j.conbuildmat.2016.09.106
  17. Huda, M.N., Jumat, M.Z.B., Islam, A.B.M.S., Darain, K.M.U., Obaydullah, M. and Hosen, M.A. (2017), "Palm oil industry's bi-products as coarse aggregate in structural lightweight concrete", Comput. Concrete, Int. J., 19(5), 515-526. https://doi.org/10.12989/cac.2017.19.5.515
  18. Islam, A. and Al-Kutti, W.A. (2018), "Seismic response variation of multistory base-isolated buildings applying lead rubber bearings", Comput. Concrete, Int. J., 21(5), 495-504. https://doi.org/10.12989/cac.2018.21.5.495
  19. Islam, A.B.M.S., Al-Kutti, W., Alsaidan, M.N., Alharbi, F.S., Nasir, M. and Anwar, F. (2018a), "Potential of volcanic waste Scoria as an eco-friendly aggregate to produce Lightweight Concrete", Proceedings of Smart Cities Symposium 2018, Bahrain, April.
  20. Islam, A.B.M.S., Al-Kutti, W., Nasir, M., Alharbi, F.S. and Alsaidan, M.N. (2018b), "Development of lightweight concrete using Saudi Scoria aggregate - A preliminary study", Proceedings of the Smart Cities Symposium 2018, Bahrain, April.
  21. Jiang, R., Mao, C., Hou, L., Wu, C. and Tan, J. (2018), "A SWOT analysis for promoting off-site construction under the backdrop of China's new urbanisation", J. Cleaner Product., 173, 225-234. https://doi.org/10.1016/j.jclepro.2017.06.147
  22. Jumaat, M.Z., Alengaram, U.J., Ahmmad, R., Bahri, S. and Islam, A.B.M.S. (2015), "Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature", Constr. Build. Mater., 101, Part 1, 942-951. http://doi.org/10.1016/j.conbuildmat.2015.10.104
  23. Kazmi, Z.A. (2020), "Improvement in shear strength characteristics of desert sand using shredded plastic waste", Geomech. Eng., Int. J., 20(6), 497-503. https://doi.org/10.12989/gae.2020.20.6.497
  24. Kazmi, Z.A. and Sodangi, M. (2021), "Integrated Analysis of the Geotechnical Factors Impeding Sustainable Building Construction-The Case of the Eastern Province of Saudi Arabia", Sustainability, 13(12), 6531. https://doi.org/10.3390/su13126531
  25. Khan, M.U., Nasir, M., Al-Amoudi, O.S.B. and Maslehuddin, M. (2021), "Influence of in-situ casting temperature and curing regime on the properties of blended cement concretes under hot climatic conditions", Constr. Build. Mater., 272, 121865. https://doi.org/10.1016/j.conbuildmat.2020.121865
  26. Lopez, M., Kurtis, K. and Kahn, L. (2006), "Pre-wetted lightweight coarse aggregate reduces long-term deformations of high-performance lightweight concrete", ACI Special Publication, 234, 661-680.
  27. Marthong, C. (2019), "Effect of waste cement bag fibers on the mechanical strength of concrete", Adv. Mater. Res., 8(2), 103-115. https://doi.org/10.12989/amr.2019.8.2.103
  28. Mazloom, M. and Mahboubi, F. (2017), "Evaluating the settlement of lightweight coarse aggregate in selfcompacting lightweight concrete", Comput. Concrete, Int. J., 19(2), 203-210. https://doi.org/10.12989/cac.2017.19.2.203
  29. Mazloom, M., Homayooni, S.M. and Miri, S.M. (2018a), "Effect of rock flour type on rheology and strength of self-compacting lightweight concrete", Comput. Concrete, Int. J., 21(2), 199-207. https://doi.org/10.12989/cac.2018.21.2.199
  30. Mazloom, M., Soltani, A., Karamloo, M., Hassanloo, A. and Ranjbar, A. (2018b), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Adv. Mater. Res., Int. J., 7(1), 45-72. https://doi.org/10.12989/amr.2018.7.1.045
  31. Mazloom, M., Tajar, S.F. and Mahboubi, F. (2020), "Long-term quality control of self-compacting semilightweight concrete using short-term compressive strength and combinatorial artificial neural networks", Comput. Concrete, Int. J., 25(5), 401-409. https://doi.org/10.12989/cac.2020.25.5.401
  32. Moravia, W.G. (2010), "Efficiency factor and modulus of elasticity of lightweight concrete with expanded clay aggregate", Revista IBRACON de estruturas e materiais, 3(2), 195-204. https://doi.org/10.1590/S1983-41952010000200005
  33. Moufti, M., Sabtan, A., El-Mahdy, O. and Shehata, W. (2000), "Assessment of the industrial utilization of scoria materials in central Harrat Rahat, Saudi Arabia", Eng. Geol., 57(3), 155-162. https://doi.org/10.1016/S0013-7952(00)00024-7
  34. Nasir, M., Al-Amoudi, O.S.B., Al-Gahtani, H.J. and Maslehuddin, M. (2016), "Effect of casting temperature on strength and density of plain and blended cement concretes prepared and cured under hot weather conditions", Constr. Build. Mater., 112, 529-537. https://doi.org/10.1016/j.conbuildmat.2016.02.211
  35. Nasir, M., Gazder, U., Maslehuddin, M., Al-Amoudi, O.S.B. and Syed, I.A. (2020), "Prediction of properties of concrete cured under hot weather using multivariate regression and ANN Models", Arab. J. Sci. Eng., 45(5), 4111-4123. https://doi.org/10.1007/s13369-020-04403-y
  36. Nasir, M., Al-Kutti, W., Kayed, T.S., Adesina, A. and Chernykh, T. (2021), "Synthesis and SWOT analysis of date palm frond ash-Portland cement composites", Environ. Sci. Pollut. Res., 28, 45240-45252. https://doi.org/10.1007/s11356-021-13957-9
  37. Palaskar, S.M. and Vesmawala, G.R. (2020), "Performance of concrete modified with SCBA and GGBFS subjected to elevated temperature", Adv. Mater. Res., Int. J., 9(3), 203-218. https://doi.org/10.12989/amr.2020.9.3.203
  38. Pardakhe, P.K. and Nalamwar, M.R. (2015), "Comparative study of R.C.C structure for earthquake load using light weight building material", Int. Res. J. Eng. Technol. (IRJET), 2(4), 1341-1350.
  39. Raithby, K. and Lydon, F. (1981), "Lightweight concrete in highway bridges", Int. J. Cement Compos. Lightweight Concrete, 3(2), 133-146. https://doi.org/10.1016/0262-5075(81)90007-5
  40. Sabtan, A. and Shehata, W. (2000), "Evaluation of engineering properties of scoria in central Harrat Rahat, Saudi Arabia", Bull. Eng. Geol. Environ., 59(3), 219-225. https://doi.org/10.1007/s100640000061
  41. Saif, M., Mullick, P. and Imam, A. (2019), "Analysis and structural design of various turbine blades under variable conditions: A review", Adv. Mater. Res., Int. J., 8(1), 11-24. https://doi.org/10.12989/amr.2019.8.1.011
  42. Shannag, M.J. (2000), "High strength concrete containing natural pozzolan and silica fume", Cement Concrete Compos., 22(6), 399-406. http://doi.org/10.1016/S0958-9465(00)00037-8
  43. Tang, C.-W. (2017), "Effect of presoaking degree of lightweight aggregate on the properties of lightweight aggregate concrete", Comput. Concr, 19, 69-78. https://doi.org/10.12989/cac.2017.19.1.069
  44. Tchamdjou, W.H.J., Cherradi, T., Abidi, M.L. and Pereira-de-Oliveira, L.A. (2018), "Mechanical properties of lightweight aggregates concrete made with cameroonian volcanic scoria: Destructive and non-destructive characterization", J. Build. Eng., 16, 134-145. https://doi.org/10.1016/j.jobe.2018.01.003
  45. Yaragal, S.C. and Ramanjaneyulu, S. (2016), "Exposure to elevated temperatures and cooled under different regimes-a study on polypropylene concrete", Adv. Mater. Res., Int. J., 5(1), 21-34. https://doi.org/10.12989/amr.2016.5.1.021
  46. Zein-Alabideen, H. (2001), "Concrete in the hot and severe environment of the Arabian Gulf Region", Proceedings of the 26th Conference on Our World in Concrete & Structures, Singapore.