사물인터넷융복합논문지 (Journal of Internet of Things and Convergence)

한국사물인터넷학회 (The Korea Internet of Things Society)
권호 표지
DOI QR코드

DOI QR Code

IoT 기기 재설계를 위한 적층제조를 활용한 부품병합 설계 방법에 대한 연구

A Study of Design for Additive Manufacturing Method for Part Consolidation to Redesign IoT Device

  • 김삼연 (전주대학교 기계시스템공학과)
  • Kim, Samyeon (Department of Mechanical Systems Engineering, Jeonju University)
  • 투고 : 2022.03.05
  • 심사 : 2022.04.14
  • 발행 : 2022.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

최근 4차 산업혁명으로 인하여, 고객 제품형 제품 설계 및 새로운 서비스 개발을 위하여 IoT 기술이 주목받고 있다. 최근 적층제조 기술은 IoT 센서를 직접 제작하거나, 센서를 포함한 기기를 만드는 분야에 다양하게 활용되고 있다. IoT 기기를 적층제조를 활용하여 제작시, 적층제조 고유의 설계 장점을 활용하기 위해 다양한 부품들을 병합하는 설계 방법론이 큰 관심을 받고 있다. 부품병합을 통해 조립 공정을 단축하고, 부품 경량화 등의 장점을 이룰 수 있기 때문이다. 따라서, 본 연구에서는 적층제조를 활용한 부품병합을 지원하기 위한 설계 방법론을 개발하였다. 이를 통해 제품의 기능 및 제품 내 부품의 기능과 물리적 연결성을 분석한 제품 아키텍쳐를 생성하고, 인접한 기능들 및 부품을 Girvan Newman 알고리즘을 활용하여, 최종 부품병합 후보군을 선정하도록 지원한다. 제안한 설계 방법론을 검증하고자 사례연구를 통해 적층제조로 출력된 전기 자전거의 부품병합과정을 분석하였다.

Recently, IoT technology has great attention and plays a key role in 4th industrial revolution in order to design customized products and services. Additive Manufacturing (AM) is applied to fabricate IoT sensor directly or IoT sensor embedded structure. Also, design methods for AM are developing to consolidate various parts of IoT devices. Part consolidation leads to assembly time and cost reduction, reliability improvement, and lightweight. Therefore, a design method was proposed to guide designers to consolidate parts. The design method helps designers to define product architecture that consists of functions and function-part relations. The product architecture is converted to a network graph and then Girvan Newman algorithm is applied to cluster the graph network. Parts in clusters are candidates for part consolidation. To demonstrate the usefulness of the proposed design method, a case study was performed with e-bike fabricated by additive manufacturing.

키워드

참고문헌

  1. D.G.Kim, H.S.Lee, T.W.Kim and H.W.Lee, "LBS/GPS based Bicycle Safety Application with Arduino," Journal of The Korea Internet of Things, Vol.2, No.1, pp.7-15, 2016.
  2. T.K.Kim, "IoT(Internet of Things)-based Smart Trash Can," Journal of The Korea Internet of Things, Vol.6, No.1, pp.17-22, 2020.
  3. S.C.Jang and J.W.Lee, "Development of Intelligent IoT Exhaustion System for Bag Filter Collector," Journal of The Korea Internet of Things, Vol.5, No.1, pp.29-34, 2019.
  4. B.Stucker, I.Gibson, and D.Rosen, Additive Manufacturing Technologies, 2nd ed., New York: Springer, 2015.
  5. T.Wohler, Wohlers report 2018, Wohlers Associates Inc. 2018.
  6. I.H.Ahn, "A Study for the Mechanical Properties with Infill Rate in FDM Process to Fabricate the Small IoT Device," Journal of The Korea Internet of Things, Vol.6, No.3, pp.77-82, 2020.
  7. D.W.Rosen, "Research supporting principles for design for additive manufacturing," Virtual and Physical Prototyping, Vol.9 No.4, pp. 225-232, 2014. https://doi.org/10.1080/17452759.2014.951530
  8. S.Yang, F.Santoro, and Y.F.Zhao, "Towards a Numerical Approach of Finding Candidates for Additive Manufacturing-Enabled Part Consolidation," Journal of Mechanical Design, Vol.140, No.4, 2018.
  9. S.D.Eppinger and K.T.Ulrich, "Product design and development," New York: McGraw-Hill, 2003.
  10. S.Kim, Y.Tang, D.Rosen, "Design for additive manufacturing: Simplification of product architecture by part consolidation for the lifecycle," Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Texas, USA, 2019.
  11. M.E.J.Newman, "Analysis of weighted networks," Physical Review E, Vol.70, 056131, 2004. https://doi.org/10.1103/physreve.70.056131
  12. M.Kumke, H.Watschke, P.Hartogh, A.K.Bavendiek, and T.Vietor, "Methods and tools for identifying and leveraging additive manufacturing design potentials," International Journal on Interactive Design and Manufacturing, Vol.12, No.2, pp. 481-493, 2018. https://doi.org/10.1007/s12008-017-0399-7
  13. S.Kim, S.K.Moon, "A Part Consolidation Design Method for Additive Manufacturing based on Product Disassembly Complexity," Applied Sciences, Vol.10, No.3, 2020.
  14. A.Blosch-Paidosh, and K.Shea, "Design Heuristics for Additive Manufacturing Validated Through a User Study." Journal of Mechanical Design, Vol.141, No.4, 2019.
  15. BigRep GmbH, 2019, NERA e-motorbike[Internet], https://bigrep.com/posts/deeper-look_into-the-fully-3d-printed-e-bike-nera/