Acknowledgement
본 연구는 산업통상자원부 및 산업기술평가관리원(KEIT)의 소재부품기술개발사업 연구비 지원에 의한 연구 결과입니다(과제번호 및 과제명; '20010580', 미니-LED 미세전극 접합을 위한 도전성 나노소재 기술 개발).
References
- J. H. Lau, "Recent advances and trends in advanced packaging", IEEE Trans. Compon. Packag. Manuf. Technol., 12(2), 228-252 (2022) https://doi.org/10.1109/TCPMT.2022.3144461
- T. Lentz and F. C. T. Assembly, "Size matters: the effects of solder powder size on solder paste performance", SMT007 Mag, 32-55 (2019).
- M. S. Kim, W. S. Hong and M. Kim, "Flip Chip-Chip Scale Package Bonding Technology with Type 7 Solder Paste Printing", JWJ, 39(4), 359-367 (2021).
- V. B. Sharma, S. Tewari, S. Biswas, B. Lohani, U. D. Dwivedi, D. Dwivedi, A. Sharma and J. P. Jung, "Recent Advancements in AI-Enabled Smart Electronics Packaging for Structural Health Monitoring", Metals, 11(10), 1537 (2021). https://doi.org/10.3390/met11101537
- X. Gu, H. Bai, D. Chen, L. Zhao, J. Yi, X. Liu and J. Yan, "The influences of reactive nanoparticles alloying on grain boundary and melting properties about Sn3. 0Ag0. 5Cu solder". Intermetallics, 138, 107346 (2021). https://doi.org/10.1016/j.intermet.2021.107346
- M. Schmid, A. Zippelius, A. Hanss, S. Bockhorst and G. Elger, "Investigations on High-Power LEDs and Solder Interconnects in Automotive Application: Part I-Initial Characterization", IEEE Trans. Device Mater. Reliab., (2022).
- Y. Shi, Y. Wang, D. Mei, B. Feng and Z. Chen, "Design and fabrication of wearable thermoelectric generator device for heat harvesting", IEEE Robot. Autom. Lett., 3(1), 373-378 (2017). https://doi.org/10.1109/LRA.2017.2734241
- S. Kumar, S. Mallik, N. Ekere and J. P. Jung, "Stencil printing behavior of lead-free Sn-3Ag-0.5 Cu solder paste for wafer level bumping for sub-100 ㎛ size solder bumps", Met. Mater. Int., 19(5), 1083-1090 (2013). https://doi.org/10.1007/s12540-013-5025-z
- S. Zhang, X. Xu, T. Lin and P. He, "Recent advances in nanomaterials for packaging of electronic devices", J. Mater. Sci. Mater. Electron., 30(15), 13855-13868 (2019). https://doi.org/10.1007/s10854-019-01790-3
- S. Rung and R. Hellmann, "Laser-Induced Period Surface Structures to Improve Solderability of Electrical Solder Pads", Appl. Sci., 12(1), 80 (2022).
- J. Wu, S. Xue, J. Wang, M. Wu and J. Wang, "Effects of α-Al2O3 nanoparticles-doped on microstructure and properties of Sn-0.3Ag-0.7Cu low-Ag solder", J Mater Sci: Mater Electron 29, 7372-7387 (2018). https://doi.org/10.1007/s10854-018-8727-7
- E. E. M. Noor, N. F. M. Nasir and S. R. A. Idris, "A review: lead free solder and its wettability properties", Solder. Surf. Mt. Technol, 28, 125-132 (2016). https://doi.org/10.1108/SSMT-08-2015-0022
- S. J. Zhong, L. Zhang, M. L. Li, W. M. Long and F. J. Wang, "Development of lead-free interconnection materials in electronic industry during the past decades: structure and properties", Mater. Des., 110439 (2022).
- K. Sukpimai, W. Suwannakrue and K. Kanlayasiri, "Wettability and printability of SAC305-xTiO2 Pb-free solder paste on Cu substrate", 10th International Conference on Mechatronics and Manufacturing(ICMM), Bangkok, 635(1), 2019 IOP Conf. Ser.: Mater. Sci. Eng.(2019)
- S. Tikale and K. N. Prabhu, "Effect of Multiple Reflow Cycles and Al2O3 Nanoparticles Reinforcement on Performance of SAC305 Lead-Free Solder Alloy", J. Mater. Eng. Perform., 27(6), 3102-3111 (2018). https://doi.org/10.1007/s11665-018-3390-y
- K. Kanlayasiri and N. Meesathien, "Effects of zinc oxide nanoparticles on properties of SAC0307 lead-free solder paste", Adv. Mater. Sci. Eng., 2018, 1-10 (2018). https://doi.org/10.1155/2018/3750742
- J. Hlinka, M. Berczeli, G. Buza and Z. Weltsch, "Wetting properties of Nd: YAG laser treated copper by SAC solders", Solder. Surf. Mt. Technol., 29(2), 69-74 (2017). https://doi.org/10.1108/SSMT-01-2016-0003
- J. Hlinka, Z. Fogarassy, A. Cziraki and Z. Weltsch, "Wetting properties, recrystallization phenomena and interfacial reactions between laser treated Cu substrate and SAC305 solder", Appl. Surf. Sci., 501, 144127 (2020). https://doi.org/10.1016/j.apsusc.2019.144127
- C. E. Ho, S. P. Yang, P. T. Lee, C. Y. Lee, C. C. Chen and T. T. Kuo, "IMC microstructure modification and mechanical reinforcement of Sn-Ag-Cu/Cu microelectronic joints through an advanced surface finish technique", J. Mater. Res. Technol., 11, 1895-1910 (2021). https://doi.org/10.1016/j.jmrt.2021.02.029
- Z. Zhang, J. Chen, J. Wang, Y. Han, Z. Yu, Q. Wang, P. Zhang and S. Yang, "Effects of solder thickness on interface behavior and nanoindentation characteristics in Cu/Sn/Cu microbumps", Weld. world, 1-11 (2022)
- S. H. Rajendran, S. J. Hwang and J. P. Jung, "Shear strength and aging characteristics of sn-3.0 ag-0.5 cu/cu solder joint reinforced with zro2 nanoparticles", Metals, 10(10), 1295 (2020). https://doi.org/10.3390/met10101295
- G. Ban, F. Sun, Y. Liu and S. Cong, "Effect of nano-Cu addition on microstructure evolution of Sn0. 7Ag0. 5Cu-BiNi/Cu solder joint", Solder. Surf. Mt. Technol., 29, 92-98 (2017). https://doi.org/10.1108/SSMT-06-2016-0013
- L. Sun, M. H. Chen, C. C. Wei, L. Zhang and F. Yang, "Effect of thermal cycles on interface and mechanical property of low-Ag Sn1. 0Ag0. 5Cu (nano-Al)/Cu solder joints", J. Mater. Sci. Mater. Electron., 29(12), 9757-9763 (2018). https://doi.org/10.1007/s10854-018-9014-3
- A. K. Gain and L. Zhang, "Effect of Ag nanoparticles on microstructure, damping property and hardness of low melting point eutectic tin-bismuth solder", J. Mater. Sci. Mater. Electron., 28(20), 15718-15730 (2017). https://doi.org/10.1007/s10854-017-7465-6
- Y. Tang, S. M. Luo, K. Q. Wang and G. Y. Li, "Effect of Nano-TiO2 particles on growth of interfacial Cu6Sn5 and Cu3Sn layers in Sn3. 0Ag0. 5CuxTiO2 solder joints", J. Alloys Compd., 684, 299-309 (2016). https://doi.org/10.1016/j.jallcom.2016.05.148
- N. Ismail, A. Jalar, M. Abu Bakar, N. S. Safee, W. Y. Wan Yusoff and A. Ismail, "Microstructural evolution and micromechanical properties of SAC305/CNT/CU solder joint under blast wave condition", Solder. Surf. Mt. Technol., 33(1), 47-56. (2021). https://doi.org/10.1108/SSMT-11-2019-0035
- N. Jiang, L. Zhang, Z. Q. Liu, L. Sun, M. Y. Xiong and K. K. Xu, "Influences of doping Ti nanoparticles on microstructure and properties of Sn58Bi solder", J. Mater. Sci. Mater. Electron., 30(19), 17583-17590 (2019). https://doi.org/10.1007/s10854-019-02107-0
- A. Yakymovych, P. Svec, L. Orovcik, O. Bajana and H. Ipser, "Nanocomposite SAC Solders: The Effect of Adding Ni and Ni-Sn Nanoparticles on Morphology and Mechanical Properties of Sn-3.0Ag-0.5Cu Solders" J. Electron. Mater., 47, 117-123 (2018). https://doi.org/10.1007/s11664-017-5834-9
- S. Chellvarajoo and M. Z. Abdullah, "Microstructure and mechanical properties of Pb-free Sn-3.0 Ag-0.5 Cu solder pastes added with NiO nanoparticles after reflow soldering process", Mater. Design, 90, 499-507 (2016). https://doi.org/10.1016/j.matdes.2015.10.142
- Y. Plevachuk, O. Tkach, P. Svec, A. Yakymovych and L. Orovcik, "Nanocomposite solders: An influence of un-coated and Au-coated carbon nanotubes on morphology of Cu/Sn-3.0 Ag-0.5 Cu/Cu solder joints", 2019 IEEE 2nd Ukraine Conference on Electrical and Computer Engineering (UKRCON), Ukraine, IEEE Components, 722-725 (2019).
- S. Tikale and K. N. Prabhu, "Performance of MWCNT-Reinforced SAC0307/Cu Solder Joint Under Multiple Reflow Cycles", Trans. Indian. Inst. Met., 71(11), 2693-2698 (2018). https://doi.org/10.1007/s12666-018-1431-8
- L. Sun, L. Zhang, L. Xu, S. J. Zhong, J. Ma and L. Bao, "Effect of nano-Al addition on properties and microstructure of low-Ag content Sn-1Ag-0.5Cu solders", J. Mater. Sci. Mater. Electron., 27, 7665-7673 (2016). https://doi.org/10.1007/s10854-016-4751-7