Acknowledgement
This work was supported by research grants from Daegu Catholic University in 2019.
References
- Aldowaisan, T., Nourelfath, M., and Hassan, J., Six Sigma performance for non-normal processes, European Journal of Operational Research, 2015, Vol. 247, No. 3, pp. 968-977. https://doi.org/10.1016/j.ejor.2015.06.036
- An, Y.S. and Hwang, I., A New Management Innovation Strategy Through 6sigma for R&D linked with TRIZ, Journal of Korean Society of Industrial and Systems Engineering, 2009, Vol. 32, No. 3, pp. 178-187.
- Basu, R. and Wright, J. N., Quality beyond six sigma, Routledge, 2012.
- Bothe, D.R., Statistical reason for the 1.5 σ shift, Quality Engineering, 2002, Vol. 14, No. 3, pp. 479-487. https://doi.org/10.1081/QEN-120001884
- Champ, C.W. and Woodall, W.H., Exact results for Shewhart control charts with supplementary runs rules, Technometrics, 1987, Vol. 29, No. 4, pp. 393-399. https://doi.org/10.1080/00401706.1987.10488266
- Duncan, A.J., Quality Control and Industrial Statistics, Homewood, IL: Richard D. Irwin. Duncan5 Quality Control and Industrial Statistics, 1986.
- Evans, D H., Statistical Tolerancing: The State of the Art: Part II. Methods for Estimating Moments, Journal of Quality Technology, 1975, Vol. 7, No. 1, pp. 1-12. https://doi.org/10.1080/00224065.1975.11980657
- Evans, J.R. and Lindsay, W.M., An introduction to Six Sigma and process improvement, Cengage Learning, 2014.
- Griffiths, D., Bunder, M., Gulati, C., and Onizawa, T., The probability of an out of control signal from Nelson's supplementary Zig-Zag test, Journal of Statistical Theory and Practice, 2010, Vol. 4, No. 4, pp. 609-615. https://doi.org/10.1080/15598608.2010.10412007
- Hahn, G.J., Doganaksoy, N., and Hoerl, R., The evolution of six sigma, Quality Engineering, 2000, Vol. 12, No. 3, pp. 317-326. https://doi.org/10.1080/08982110008962595
- Hahn, G.J., Hill, W.J., Hoerl, R.W., and Zinkgraf, S.A., The impact of Six Sigma improvement- a glimpse into the future of statistics, The American Statistician, 1999, Vol. 53, No. 3, pp. 208-215. https://doi.org/10.2307/2686099
- Harry, M.J., Resolving the mysteries of Six Sigma: statistical constructs and engineering rationale, Phoenix: Palladyne Publishing, 2003.
- https://www.gigacalculator.com/calculators/six-sigma-dpmo-calculator.php.
- https://www.isixsigma.com/new-to-six-sigma/dmaic/15-sigma-process-shift/.
- https://ko.wikipedia.org/wiki/6_시그마.
- https://www.managementstudyguide.com/six-sigma-shift.htm.
- https://www.qualitydigest.com/inside/six-sigma-column/15-sigma-shift-explained-040406.html.
- https://www.sixsigma-institute.org/Six_Sigma_DMAIC_Process_Measure_Phase_Process_Capability.php.
- Hwang, G.H., A Study on the Performances of Driving Six Sigma in a ICT Industry, Journal of Korean Society of Industrial and Systems Engineering, 2012, Vol. 35, No. 2, pp. 220-227.
- Lee, P.H., Understanding the 1.5 σ shift, Samsung Economic Research Institute(SERI), 2005.
- Linderman, K., Schroeder, R.G., Zaheer, S., and Choo, A.S., Six Sigma: A goal-theoretic perspective, Journal of Operations Management, 2003, Vol. 21, No. 2, pp. 193-203. https://doi.org/10.1016/S0272-6963(02)00087-6
- Mehrjerdi, Y.Z., Six-Sigma: Methodology, tools and its future, Assembly Automation, 2011, Vol. 31 No. 1, pp. 79-88 https://doi.org/10.1108/01445151111104209
- Montgomery, D.C. and Woodall, W.H., An overview of six sigma. International Statistical Review/Revue, Internationale de Statistique, 2008, pp. 329-346.
- Nelson, L.S., The Shewhart control chart- tests for special causes, Journal of Quality Technology, 1984, Vol. 16, No. 4, pp. 237-239. https://doi.org/10.1080/00224065.1984.11978921
- Ninerola, A., Sanchez-Rebull, M.V., and Hernandez-Lara, A.B., Six Sigma literature: a bibliometric analysis, Total Quality Management and Business Excellence, 2019, pp. 1-22.
- Perera, A.D., Jayamaha, N.P., Grigg, N.P., Tunnicliffe, M., and Singh, A., The application of machine learning to consolidate critical success factors of lean six sigma, IEEE Access, 2021, Vol. 9, pp. 112411-112424. https://doi.org/10.1109/ACCESS.2021.3103931
- Pyzdek, T. and Keller, P.A., The six sigma handbook (Vol. 4). New York, NY, USA: McGraw-Hill Education, 2014.
- Raval, N. and Muralidharan, K., A note on 1.5 Sigma shift in performance evaluation, International Journal of Reliability, Quality and Safety Engineering, 2016, Vol. 23, No. 6, pp. 1640007. https://doi.org/10.1142/S0218539316400076
- Roberts, S.W., Properties of control chart zone tests, Bell System Technical Journal, 1958, Vol. 37, No. 1, pp. 83-114. https://doi.org/10.1002/j.1538-7305.1958.tb03870.x
- Saxena, M.M., Six Sigma Methodologies and its Application in Manufacturing Firms, International Journal Of Engineering And Management Research, 2021, Vol. 11, No. 4, pp. 79-85.
- Sony, M., Antony, J., Park, S., and Mutingi, M., Key criticisms of Six Sigma: A systematic literature review, IEEE Transactions on Engineering Management, 2019, Vol. 67, No. 3, pp. 950-962. https://doi.org/10.1109/tem.2018.2889517
- Stevenson, J.R., Detecting the process' 1.5 sigma shift: A quantitative study. University of Northern Iowa, 2009.
- Tennant, G. (2017) Six Sigma: SPC and TQM in manufacturing and services. Routledge.
- Yang, K., Basem, S., and El-Haik, B., Design for six sigma (pp. 184-186). New York: McGraw-Hill, 2003.