Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

AnalysisFeasibility Study on the Assessing Surface Finishing TimeManagement of Concrete by Settimeter(Setting time meter)

Settimeter(Setting time meter)에 의한 콘크리트 표면마감시간 관리의 가능성 분석

  • Han, Soo-Hwan (Dept. of Architectural Engineering, Cheongju University) ;
  • Kim, Jong (Dept. of Architectural Engineering, Cheongju University) ;
  • Han, Min-Cheol (Dept. of Architectural Engineering, Cheongju University) ;
  • Han, Cheon-Goo (Dept. of Architectural Engineering, Cheongju University)
  • 한수환 (청주대학교 건축공학과) ;
  • 김종 (청주대학교 건축공학과) ;
  • 한민철 (청주대학교 건축공학과) ;
  • 한천구 (청주대학교 건축공학과)
  • Received : 2021.04.08
  • Accepted : 2022.02.27
  • Published : 2022.03.30
⟨ Previous Next ⟩

Abstract

This study attempts to find a correlation between the hardness of the set meter and from analyzing the field applicability, to propose a scientific setting time determination method when working on concrete surface finishing. The results indicated that surface finish time management is possible if the concrete surface finish work at the site manages to start at the initial time before and after 45HD of the set meter hardness. Further analysis is needed to collect enough data to statistically process at more work sites to prove its effectiveness. Overall, if the concrete surface finishing work hours reach a consensus in practical application, it could contribute to the transformation of quality scientific management.

Keywords

Acknowledgement

이 연구는 2021년도 한국연구재단 연구비 지원에 의한 결과의 일부임 과제번호:2019R1I1A3A01062396

References

  1. Korea Concrete Institue (2010). Concrete working manual, Concrete curing. Kimoondang, 17-18.
  2. KS F 2436 (2017) Standard test method for setting times of concrete mixture by penetration resistance
  3. Kato, J., Makishima, & O. (2017). Proposal for effective construction management technique by setting management at concrete placement. Proceedings of Architecture Institute of Japan, 423-424. [in Japan]
  4. Han, Mi., Shin, Y., & Han, I. (2019). Estimation of the Setting Time of the High Flowing Concrete Using Durometer. Journal of the Architectural Institute of Korea Structure & Construction, 35(9), 143-150. https://doi.org/10.5659/JAIK_SC.2019.35.9.143
  5. Han, M., Han, I., & Shin, Y. (2019). Estimation of Setting Time of Concrete Using Rubber Hardness Meter. Journal of the Korean Recycled Construction Resources Institute, 7(4), 358-366. https://doi.org/10.14190/JRCR.2019.7.4.358
  6. Han C., Han M., & Shin Y. (2020). Feasibility Study of Modified Durometer to Evaluate Setting Time of the Concrete. Journal of the Korea Institute of Building Construction. 20(5), 433-440.
  7. Lee H.J., Choi Y.H., Lee J.S., Han D.Y., Han I.D., & Han, M.C. (2019). Estimation of Setting Time Using Improved Type Durometer of Powdered High Fluidity Concrete. Proceedings of Korean Society for Atmospheric Environment, (19)1. 17-18.
  8. Lee, H.J., Chol, Y.H., Lee, Y.J., Shin Y.S., Han M.C., & Han, C.G. (2019). An Analysis on the Possibility of Using the Improved Durometer in Estimating the Setting Time according to the Temperature Variation of High Strength Concrete. Proceedings of the Architectural Institute of Korea, 39(1), 620-621.