과제정보
이 연구는 2022년도 정부의 재원으로 한국연구재단사업 (NRF-2019M3E6A1064797, NRF-2019R1F1A1060550, NRF-2020R1A6A1A03038697, NRF-2022R1F1A1072548)의 지원을 받아 수행되었습니다.
참고문헌
- H. Ko, M. Kim, S. Y. Nam, and K. Kim, "Research of cross-linked hydrocarbon based polymer electrolyte membranes for polymer electrolyte membrane fuel cell applications", Membr. J., 30, 395-408 (2020). https://doi.org/10.14579/MEMBRANE_JOURNAL.2020.30.6.395
- D. Streimikiene and S. Girdzijauskas, "Assessment of post-Kyoto climate change mitigation regimes impact on sustainable development", Renew. Sust. Energ. Rev., 13, 129-141 (2009). https://doi.org/10.1016/j.rser.2007.07.002
- P. Agreement, "UNFCCC, Adoption of the Paris agreement. COP", 25th session Paris, 30, pp. 1-25 (2015).
- H. P. Xu, X. H. Wen, and L. Kong, "High power DC-DC converter and fuel cell distributed generation system", Ieee Ind. Applic. Soc., 19, 1134-1139 (2004).
- S. Mekhilef, R. Saidur, and A. Safari, "Comparative study of different fuel cell technologies", Renew Sust Energ Rev., 16, 981-989 (2012). https://doi.org/10.1016/j.rser.2011.09.020
- M. Miansari, K. Sedighi, M. Amidpour, E. Alizadeh, and M. Miansari, "Experimental and thermodynamic approach on proton exchange membrane fuel cell performance", J. Power Sources, 190, 356-361 (2009). https://doi.org/10.1016/j.jpowsour.2009.01.082
- M. Kim, H. Ko, S. Y. Nam, and K. Kim, "Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications", Polymers (Basel), 13, 3520 (2021).
- K. Sopian and W. R. W. Daud, "Challenges and future developments in proton exchange membrane fuel cells", Renew. Energy, 31, 719-727 (2006). https://doi.org/10.1016/j.renene.2005.09.003
- O. Ijaodola, Z. El-Hassan, E. Ogungbemi, F. Khatib, T. Wilberforce, J. Thompson, and A. Olabi, "Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)", Energy, 179, 246-267 (2019). https://doi.org/10.1016/j.energy.2019.04.074
- J. M. Correa, F. A. Farret, L. N. Canha, and M. G. Simoes, "An electrochemical-based fuel-cell model suitable for electrical engineering automation approach", IEEE Trans. Ind. Electron., 51, 1103-1112 (2004). https://doi.org/10.1109/TIE.2004.834972
- R. Rosli, A. Sulong, W. Daud, M. Zulkifley, T. Husaini, M. Rosli, E. Majlan, and M. Haque, "A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system", Int. J. Hydrog. Energy, 42, 9293-9314 (2017). https://doi.org/10.1016/j.ijhydene.2016.06.211
- H. Zhang and P. K. Shen, "Recent development of polymer electrolyte membranes for fuel cells", Chem. Rev., 112, 2780-2832 (2012). https://doi.org/10.1021/cr200035s
- F. Mura, R. Silva, and A. Pozio, "Study on the conductivity of recast Nafion®/montmorillonite and Nafion®/TiO2 composite membranes", Electrochim. Acta, 52, 5824-5828 (2007). https://doi.org/10.1016/j.electacta.2007.02.081
- Y. Jeon, H.-k. Hwang, J. Park, H. Hwang, and Y.-G. Shul, "Temperature-dependent performance of the polymer electrolyte membrane fuel cell using short-side-chain perfluorosulfonic acid ionomer", Int. J. Hydrog. Energy, 39, 11690-11699 (2014). https://doi.org/10.1016/j.ijhydene.2014.05.105
- H. Lee, M. Han, Y.-W. Choi, and B. Bae, "Hydrocarbon-based polymer electrolyte cerium composite membranes for improved proton exchange membrane fuel cell durability", J. Power Sources, 295, 221-227 (2015). https://doi.org/10.1016/j.jpowsour.2015.07.001
- T. Li, J. Shen, G. Chen, S. Guo, and G. Xie, "Performance comparison of proton exchange membrane fuel cells with nafion and aquivion perfluorosulfonic acids with different equivalent weights as the electrode binders", ACS Omega, 5, 17628-17636 (2020). https://doi.org/10.1021/acsomega.0c02110
- S. K. Das, A. Reis, and K. Berry, "Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell", J. Power Sources, 193, 691-698 (2009). https://doi.org/10.1016/j.jpowsour.2009.04.021
- J. Baschuk and X. Li, "Carbon monoxide poisoning of proton exchange membrane fuel cells", Int. J. Energy Res., 25, 695-713 (2001). https://doi.org/10.1002/er.713
- K. Oh and H. Ju, "Temperature dependence of CO poisoning in high-temperature proton exchange membrane fuel cells with phosphoric acid-doped polybenzimidazole membranes", Int. J. Hydrog. Energy, 40, 7743-7753 (2015). https://doi.org/10.1016/j.ijhydene.2015.01.107
- Q. Li, R. He, J.-A. Gao, J. O. Jensen, and N. J. Bjerrum, "The CO poisoning effect in PEMFCs operational at temperatures up to 200 C", J. Electrochem. Soc., 150, A1599 (2003).
- C. Zhang, W. Zhou, M. M. Ehteshami, Y. Wang, and S. H. Chan, "Determination of the optimal operating temperature range for high temperature PEM fuel cell considering its performance, CO tolerance and degradation", Energy Convers. Manag., 105, 433-441 (2015). https://doi.org/10.1016/j.enconman.2015.08.011
- S. Galbiati, A. Baricci, A. Casalegno, and R. Marchesi, "Degradation in phosphoric acid doped polymer fuel cells: A 6000 h parametric investigation", Int. J. Hydrog. Energy, 38, 6469-6480 (2013). https://doi.org/10.1016/j.ijhydene.2013.03.012
- Q. Li, R. He, J. O. Jensen, and N. J. Bjerrum, "Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100 C", Chem. Mater., 15, 4896-4915 (2003). https://doi.org/10.1021/cm0310519
- S. Bose, T. Kuila, T. X. H. Nguyen, N. H. Kim, K.-t. Lau, and J. H. Lee, "Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges", Prog. Polym. Sci., 36, 813-843 (2011). https://doi.org/10.1016/j.progpolymsci.2011.01.003
- Q. Li, J. O. Jensen, R. F. Savinell, and N. J. Bjerrum, "High temperature proton exchange membranes based on polybenzimidazoles for fuel cells", Prog. Polym. Sci., 34, 449-477 (2009). https://doi.org/10.1016/j.progpolymsci.2008.12.003
- J.-T. Wang, R. Savinell, J. Wainright, M. Litt, and H. Yu, "A H2O2 fuel cell using acid doped polybenzimidazole as polymer electrolyte", Electrochim. Acta, 41, 193-197 (1996). https://doi.org/10.1016/0013-4686(95)00313-4
- J. Wainright, J. T. Wang, D. Weng, R. Savinell, and M. Litt, "Acid-doped polybenzimidazoles: a new polymer electrolyte", J. Electrochem. Soc., 142, L121 (1995).
- R. Zeis, "Materials and characterization techniques for high-temperature polymer electrolyte membrane fuel cells", Beilstein J. Nanotechnol., 6, 68-83 (2015). https://doi.org/10.3762/bjnano.6.8
- L. K. Seng, M. S. Masdar, and L. K. Shyuan, "Ionic liquid in phosphoric acid-doped polybenzimidazole (PA-PBI) as electrolyte membranes for PEM fuel cells: A review", Membranes, 11, 728 (2021).
- R. He, Q. Li, G. Xiao, and N. J. Bjerrum, "Proton conductivity of phosphoric acid doped polybenzimidazole and its composites with inorganic proton conductors", J. Membr. Sci., 226, 169-184 (2003). https://doi.org/10.1016/j.memsci.2003.09.002
- Z. Yue, Y.-B. Cai, and S. Xu, "Phosphoric acid-doped cross-linked sulfonated poly (imide-benzimidazole) for proton exchange membrane fuel cell applications", J. Membr. Sci., 501, 220-227 (2016). https://doi.org/10.1016/j.memsci.2015.11.045
- K. S. Kumar and M. R. Prabhu, "Enhancing proton conduction of poly (benzimidazole) with sulfonated titania nano composite membrane for PEM fuel cell applications", Macromol. Res., 29, 111-119 (2021). https://doi.org/10.1007/s13233-021-9014-7
- K. S. Lee, J. S. Spendelow, Y. K. Choe, C. Fujimoto, and Y. S. Kim, "An operationally flexible fuel cell based on quaternary ammonium-biphosphate ion pairs", Nat. Energy, 1, 1-7 (2016)
- V. Atanasov, A. S. Lee, E. J. Park, S. Maurya, E. D. Baca, C. Fujimoto, and Y. S. Kim, "Synergistically integrated phosphonated poly (pentafluorostyrene) for fuel cells", Nat. Mater., 20, 370-377 (2021). https://doi.org/10.1038/s41563-020-00841-z
- D. C. Seel and B. C. Benicewicz, "Polyphenylquinoxaline-based proton exchange membranes synthesized via the PPA Process for high temperature fuel cell systems", J. Membr. Sci., 405, 57-67 (2012). https://doi.org/10.1016/j.memsci.2012.02.044
- G. Qian and B. C. Benicewicz, "Synthesis and characterization of high molecular weight hexafluoroisopropylidene-containing polybenzimidazole for high-temperature polymer electrolyte membrane fuel cells", J. Polym. Sci. A. Polym. Chem., 47, 4064-4073 (2009). https://doi.org/10.1002/pola.23467
- J. W. Lee, D. Y. Lee, H.-J. Kim, S. Y. Nam, J. J. Choi, J.-Y. Kim, J. H. Jang, E. Cho, S.-K. Kim, and S.-A. Hong, "Synthesis and characterization of acid-doped polybenzimidazole membranes by sol- gel and post-membrane casting method", J. Membr. Sci., 357, 130-133 (2010). https://doi.org/10.1016/j.memsci.2010.04.010
- L. Xiao, H. Zhang, E. Scanlon, L. Ramanathan, E.-W. Choe, D. Rogers, T. Apple, and B. C. Benicewicz, "High-temperature polybenzimidazole fuel cell membranes via a sol- gel process", Chem. Mater., 17, 5328-5333 (2005). https://doi.org/10.1021/cm050831+
- Q. Li, R. He, J. Jensen, and N. Bjerrum, "PBI-based polymer membranes for high temperature fuel cells-preparation, characterization and fuel cell demonstration", Fuel Cells, 4, 147-159 (2004). https://doi.org/10.1002/fuce.200400020
- J. E. Del Bene and I. Cohen, "Molecular orbital theory of the hydrogen bond. 20. Pyrrole and imidazole as proton donors and proton acceptors", J. Am. Chem. Soc., 100, 5285-5290 (1978). https://doi.org/10.1021/ja00485a007
- Y.-L. Ma, J. Wainright, M. Litt, and R. Savinell, "Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells", J. Electrochem. Soc., 151, A8 (2003).
- X. Baozhong and O. Savadogo, "The effect of acid doping on the conductivity of polybenzimidazole (PBI)", J. New Mater. Electrochem. Syst., 2, (1999).
- H. Pu, W. H. Meyer and G. Wegner, "Proton transport in polybenzimidazole blended with H3PO4 or H2SO4", J. Polym. Sci. B. Polym. Phys., 40, 663-669 (2002). https://doi.org/10.1002/polb.10132
- J. Fontanella, M. Wintersgill, J. Wainright, R. Savinell, and M. Litt, "High pressure electrical conductivity studies of acid doped polybenzimidazole", Electrochim. Acta, 43, 1289-1294 (1998). https://doi.org/10.1016/S0013-4686(97)10032-9
- L. Qingfeng, H. A. Hjuler, and N. Bjerrum, "Phosphoric acid doped polybenzimidazole membranes: physiochemical characterization and fuel cell applications", J. Appl. Electrochem., 31, 773-779 (2001). https://doi.org/10.1023/A:1017558523354
- J. Escorihuela, A. Garcia-Bernabe, and V. Compan, "A deep insight into different acidic additives as doping agents for enhancing proton conductivity on polybenzimidazole membranes", Polymers, 12, 1374 (2020). https://doi.org/10.3390/polym12020276
- A. Kannan, Q. Li, L. N. Cleemann, and J. O. Jensen, "Acid Distribution and Durability of HT-PEM Fuel Cells with Different Electrode Supports", Fuel Cells, 18, 103-112 (2018). https://doi.org/10.1002/fuce.201700181
- M. Prokop, M. Vesely, P. Capek, M. Paidar, and K. Bouzek, "High-temperature PEM fuel cell electrode catalyst layers part 1: Microstructure reconstructed using FIB-SEM tomography and its calculated effective transport properties", Electrochim. Acta, 413, 140133 (2022).
- X. Li, H. Ma, H. Wang, S. Zhang, Z. Jiang, B. Liu, and M. D. Guiver, "Novel PA-doped polybenzimidazole membranes with high doping level, high proton conductivity and high stability for HT-PEMFCs", RSC Adv., 5, 53870-53873 (2015). https://doi.org/10.1039/C5RA05953D
- E. Quartarone, P. Mustarelli, A. Carollo, S. Grandi, A. Magistris, and Gerbaldi, "PBI composite and nanocomposite membranes for PEMFCs: the role of the filler", Fuel Cells, 9, 231-236 (2009). https://doi.org/10.1002/fuce.200800145
- A. LaConti, M. Hamdan, and R. McDonald, "Handbook of fuel cells-fundamentals, technology and applications", Wiley, New York, NY, 3, 647 (2003).
- A. Collier, H. Wang, X. Z. Yuan, J. Zhang, and D. P. Wilkinson, "Degradation of polymer electrolyte membranes", Int. J. Hydrog. Energy, 31, 1838-1854 (2006). https://doi.org/10.1016/j.ijhydene.2006.05.006
- F. Mack, K. Aniol, C. Ellwein, J. Kerres, and R. Zeis, "Novel phosphoric acid-doped PBI-blends as membranes for high-temperature PEM fuel cells", J. Mater. Chem. A, 3, 10864-10874 (2015). https://doi.org/10.1039/C5TA01337B
- J. Park, L. Wang, S. G. Advani, and A. K. Prasad, "Mechanical stability of H3PO4-doped PBI/hydrophilic-pretreated PTFE membranes for high temperature PEMFCs", Electrochim. Acta, 120, 30-38 (2014). https://doi.org/10.1016/j.electacta.2013.12.030
- D. Qiu, L. Peng, X. Lai, M. Ni, and W. Lehnert, "Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell", Renew. Sust. Energ. Rev., 113, 109289 (2019).
- S. J. Aravind, R. I. Jafri, N. Rajalakshmi, and S. Ramaprabhu, "Solar exfoliated graphene-carbon nanotube hybrid nano composites as efficient catalyst supports for proton exchange membrane fuel cells", J. Mater. Chem., 21, 18199-18204 (2011). https://doi.org/10.1039/c1jm13908h
- A. Pandele, F. Comanici, C. Carp, F. Miculescu, S. Voicu, V. Thakur, and B. Serban, "Synthesis and characterization of cellulose acetate-hydroxyapatite micro and nano composites membranes for water purification and biomedical applications", Vacuum, 146, 599-605 (2017). https://doi.org/10.1016/j.vacuum.2017.05.008
- S. Hassan and M. Gupta, "Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement", Mater. Sci. Eng. A, 392, 163-168 (2005). https://doi.org/10.1016/j.msea.2004.09.047
- H. A. Arida, A. Al-Hajry, and I. A. Maghrabi, "A novel solid-state copper (II) thin-film micro-sensor based on organic membrane and titanium dioxide nano-composites", Int. J. Electrochem. Sci., 9, 426-434 (2014). https://doi.org/10.1016/S1452-3981(23)07729-5
- Y. S. Choi and I. J. Chung, "Comprehending polymer-clay nanocomposites and their future works", Korean Chem. Eng. Res., 46, 23-36 (2008).
- D. HAN and D. J. YOO, "Mesoporous SiO2 mediated polybenzimidazole composite membranes for HT-PEMFC application", KHNES, 30, 128-135 (2019).
- K. H. Lee, J. Y. Chu, A. R. Kim, and D. J. Yoo, "Effect of functionalized SiO2 toward proton conductivity of composite membranes for PEMFC application", Int. J. Energy. Res., 43, 5333-5345 (2019). https://doi.org/10.1002/er.4610
- K. Selvakumar, A. R. Kim, M. R. Prabhu, and D. J. Yoo, "Structural and Thermal Analysis and Membrane Characteristics of Phosphoric Acid-doped Polybenzimidazole/Strontium Titanate Composite Membranes for HT-PEMFC Applications", Compos. Res., 34, 373-379 (2021).
- N. Ioana-Maria, J. Aurora, C. Victoria, and B. Cristian, "Advanced polymeric materials based on PBI/SiO2 composite with high-performances designated for PEM-fuel cells." 2017 Electric Vehicles International Conference (EV), pp 1-6, (2017).
- S. Bano, Y. S. Negi, R. Illathvalappil, S. Kurungot, and K. Ramya, "Studies on nano composites of SPEEK/ethylene glycol/cellulose nanocrystals as promising proton exchange membranes", Electrochim. Acta, 293, 260-272 (2019). https://doi.org/10.1016/j.electacta.2018.10.029
- H. Pu, L. Liu, Z. Chang, and J. Yuan, "Organic/ inorganic composite membranes based on polybenzimidazole and nano-SiO2", Electrochim. Acta, 54, 7536-7541 (2009). https://doi.org/10.1016/j.electacta.2009.08.011
- Y. Ozdemir, N. Uregen, and Y. Devrim, "Polybenzimidazole based nanocomposite membranes with enhanced proton conductivity for high temperature PEM fuel cells", Int. J. Hydrog. Energy, 42, 2648-2657 (2017). https://doi.org/10.1016/j.ijhydene.2016.04.132
- F. J. Pinar, P. Canizares, M. A. Rodrigo, D. Ubeda, and J. Lobato, "Titanium composite PBI-based membranes for high temperature polymer electrolyte membrane fuel cells. Effect on titanium dioxide amount", RSC Adv., 2, 1547-1556 (2012). https://doi.org/10.1039/C1RA01084K
- A. Lysova, I. Ponomarev, and A. Yaroslavtsev, "Composite materials based on polybenzimidazole and inorganic oxides", Solid State Ion., 188, 132-134 (2011). https://doi.org/10.1016/j.ssi.2010.10.010
- X. Chen, G. Qian, M. A. Molleo, B. C. Benicewicz, and H. J. Ploehn, "High temperature creep behavior of phosphoric acid-polybenzimidazole gel membranes", J. Polym. Sci. B: Polym. Phys., 53, 1527-1538 (2015). https://doi.org/10.1002/polb.23791
- J. Liao, Q. Li, H. Rudbeck, J. O. Jensen, A. Chromik, N. Bjerrum, J. Kerres, and W. Xing, "Oxidative degradation of polybenzimidazole membranes as electrolytes for high temperature proton exchange membrane fuel cells", Fuel Cells, 11, 745-755 (2011). https://doi.org/10.1002/fuce.201000146
- H. Hou, M. L. Di Vona and P. Knauth, "Building bridges: Crosslinking of sulfonated aromatic polymers-A review", J. Membr. Sci., 423, 113-127 (2012). https://doi.org/10.1016/j.memsci.2012.07.038
- H. Li, G. Zhang, J. Wu, C. Zhao, Q. Jia, C. M. Lew, L. Zhang, Y. Zhang, M. Han, and J. Zhu, "A facile approach to prepare self-cross-linkable sulfonated poly (ether ether ketone) membranes for direct methanol fuel cells", J. Power Sources, 195, 8061-8066 (2010). https://doi.org/10.1016/j.jpowsour.2010.06.106
- J. H. Kim, K. Kim, and S. Y. Nam, "Research trends of polybenzimidazole-based membranes for hydrogen purification applications", Appl. Chem. Eng., 31, 453-466 (2020). https://doi.org/10.14478/ACE.2020.1054
- I. B. Valtcheva, P. Marchetti, and A. G. Livingston, "Crosslinked polybenzimidazole membranes for organic solvent nanofiltration (OSN): Analysis of crosslinking reaction mechanism and effects of reaction parameters", J. Membr. Sci., 493, 568-579 (2015). https://doi.org/10.1016/j.memsci.2015.06.056
- N. N. Krishnan, D. Joseph, N. M. H. Duong, A. Konovalova, J. H. Jang, H.-J. Kim, S. W. Nam, and D. Henkensmeier, "Phosphoric acid doped crosslinked polybenzimidazole (PBI-OO) blend membranes for high temperature polymer electrolyte fuel cells", J. Membr. Sci., 544, 416-424 (2017). https://doi.org/10.1016/j.memsci.2017.09.049
- Harilal, R. Nayak, P. C. Ghosh, and T. Jana, "Cross-linked polybenzimidazole membrane for PEM fuel cells", ACS Appl. Polym. Mater., 2, 3161-3170 (2020). https://doi.org/10.1021/acsapm.0c00350
- W. Peng, F. Yao, J. Hu, Y. Liu, Z. Lu, Y. Liu, Z. Liu, K. Zeng, and G. Yang, "Renewable proteinbased monomer for thermosets: a case study on phthalonitrile resin", Green Chem., 20, 5158-5168 (2018). https://doi.org/10.1039/c8gc01824c