디지털융복합연구 (Journal of Digital Convergence)

  • 제20권2호
  • /
  • Pages.277-287
  • /
  • 2022
  • /
  • 2713-6434(pISSN)
  • /
  • 2713-6442(eISSN)
한국디지털정책학회 (The Society of Digital Policy and Management)
권호 표지
DOI QR코드

DOI QR Code

BIM기반 BIPV 적용 건축물의 제로에너지 자립률 검토 방법에 관한 연구

A Study on the Review Method of Zero Energy Independence Rate in Building Applied with BIM-based BIPV

  • 최규혁 ((주)비아이엠에스 기술연구소) ;
  • 전현우 ((주)비아이엠에스 기술연구소) ;
  • 박경도 (건국대학교 건축학부)
  • 투고 : 2022.01.04
  • 심사 : 2022.02.20
  • 발행 : 2022.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

제로에너지 건축물(ZEB)은 건축물 자체의 에너지 자립도를 높인 건축물로서 에너지를 생산할 수 있는 신재생 요소가 필수적이며, 건물형 태양광(BIPV)이 가장 주목받고 있는 기술이다. ZEB의 설계에서 BIPV은 설계 초기에 계획되어야 하나, 초기 단계에서 BIPV 계획은 미비한 실정이다. 이에 본 연구에서는 설계 초기 BIPV의 계획과 ZEB 자립률 검토를 위해, 3차원 설계와 빅데이터의 융·복합 설계기술인 건축물 정보통합 모델링(BIM)을 기반으로, BIM과 ZEB에 대한 이론적 고찰 및 ZEB 자립률 분석을 위한 요소를 도출하고, BIPV 에너지 생산량과 건물 에너지 소비량 산출 방법을 분석하였다. 최종적으로, 프로젝트 모델에서 에너지 자립률을 산정하고, 등급 기준을 검토함으로써, 설계 초기 ZEB의 에너지 자립률 산정에 대한 기초적인 연구 방법을 제시하였다. 이를 통해, ZEB 주체자의 의사결정을 지원함으로써 설계 생산성을 향상시킬 수 있을 것으로 기대된다.

ZEB is a building that increases the energy independence of the building itself, and new and renewable elements that can produce energy are essential, and BIPV is the most notable technology. In ZEB's design, BIPV should be planned early in the design, but BIPV plans are insufficient in the early stages. Therefore, this study derived elements for theoretical consideration of BIM and ZEB and analysis of ZEB independence rate based on BIM, a convergence design technology, and analyzed BIPV energy production and building energy consumption. Finally, by calculating the energy independence rate and reviewing the rating criteria in the project model, a basic research method for calculating the energy independence rate of ZEB at the beginning of the design was presented. Through this, it is expected that design productivity can be improved by supporting the decision of ZEB subjects.

키워드

과제정보

This paper was written as part of Konkuk University's research support program for its faculty on sabbatical leave in 2020. This work was supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP) and the Ministry of Trade, Industry & Energy(MOTIE) of the Republic of Korea (No. 20203040010330)

참고문헌

  1. S. M. Lee & T. K. Lee & J. U. Kim. (2018). A Study on the Design Method of Zero Energy Building considering Energy Demand and Energy Generation by Region, Journal of the Architectural Institute of Korea Planning & Design, 34(8), pp. 13-22. DOI : 10.5659/JAIK_PD.2018.34.8.13
  2. Y. Saheb. (2013). Modernising Building Energy Codes, The International Energy Agency Policy Pathway, pp. 24-28.
  3. Korea Energy Agency New and Renewable Energy Center. (2021). Mandatory installation. https://www.knrec.or.krx
  4. J. H. Mun & J. C. Kim. (2018). A Study on the Improvement of Energy Self-Sufficiency Rate for Obtaining Zero Energy Building Certification, Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 32(7), pp. 27-32. DOI : 10.5207/JIEIE.2018.32.7.027
  5. J. H. Yoon. (2014). Technical Approach Method for Zero Energy Building and the Integration of Re Systems, Review of Architecture and Building Science, 58(3), pp. 32-37.
  6. Ministry of Land, Infrastructure and Transport. (2020). Construction industry BIM Basic Guidelines, Ministry of Land, Infrastructure and Transport.
  7. Ministry of Land, Infrastructure and Transport. (2010). Building BIM Application Guide, Ministry of Land, Infrastructure and Transport.
  8. Korea Institute of Civil Engineering and Building Technology. (2019). Final Report on the Development of Optimization Simulator for Promotion of Energy Building Transition to Low Cost Zero (Technology/Cost), Ministry of Land, Infrastructure and Transport.
  9. Korea Energy Agency. (2019). Energy saving plan, Korea Energy Agency.
  10. Renewable Energy Center. (2020). The mandatory guide for installing new and renewable energy. Korea Energy Agency.
  11. Renewable Energy Center. (2020). Guidelines on the support of new and renewable energy facilities, Korea Energy Agency.
  12. Korea Energy Agency. (2020). Zero Energy Building Certification Guide, Korea Energy Agency.
  13. Korea Energy Agency. (2013). Building Energy Efficiency Rating Certification System Operational Regulations, Korea Energy Agency.
  14. Korea Energy Agency. (2021). Building Energy Efficiency Rating Certification. http://www.kemco.or.kr/web/kem_home_new/ener_efficiency
  15. H. W. Jeon & K. H. Choi & S. J. Park. (2019). BIM-based building integrated photovoltaic power generation system design analysis through building energy use analysis, KIEAE Journal, 19(3), pp. 63-70. DOI : 10.12813/kieae.2019.19.3.063
  16. H. W. Jeon & K. H. Choi & S. J. Lee & S. J. Park. (2018). Development of BIM based BIPV architectural Design Environmet, KIEAE Journal, 18(1), pp. 71-82. DOI : 10.12813/kieae.2018.18.1.071
  17. D. S. Kim & J. J. Choi & K. J. Kim & H. W. Jeon. (2021). Building Integrated Photovoltaic (BIPV) Demonstration and Power Generation Analysis for The School Building, Journal of the Korean Solar Energy Society, 41(3), pp. 193-207. DOI : 10.7836/kses.2021.41.3.193