Smart Structures and Systems

  • 제29권2호
  • /
  • Pages.351-359
  • /
  • 2022
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Synergistic effects of CNT and CB inclusion on the piezoresistive sensing behaviors of cementitious composites blended with fly ash

  • Jang, Daeik (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Yoon, H.N. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Yang, Beomjoo (School of Civil Engineering, Chungbuk National University) ;
  • Seo, Joonho (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Farooq, Shah Z. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Lee, H.K. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST))
  • 투고 : 2021.06.24
  • 심사 : 2021.11.12
  • 발행 : 2022.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present study investigated the synergistic effects of carbon nanotube (CNT) and carbon black (CB) inclusions on the piezoresistive sensing behaviors of cementitious composites. Four different CNT and CB combinations were considered to form different conductive networks in the binder material composed of Portland cement and fly ash. The cement was substituted with fly ash at levels of 0 or 50% by the mass of binder. The specimens were cured up to 100 days to observe the variations of the electrical characteristics with hydration progress, and the piezoresistive sensing behaviors of the specimens were measured under cyclic loading tests. The fabricated specimens were additionally evaluated with flowability, resistivity and cyclic loading tests, and morphological analysis. The scanning electron microscopy and energy disperse X-ray spectroscopy test results indicated that CNT and CB inclusion induced synergistic formations of electrically conductive networks, which led to an improvement of piezoresistive sensing behaviors. Moreover, the incorporation of fly ash having Fe3+ components decreased the electrical resistivity, improving both the linearity of fractional changes in the electrical resistivity and reproducibility expressed as R2 under cyclic loading conditions.

키워드

과제정보

This study was supported by a grant from the National Research Foundation of Korea (NRF) (2021R1A2C3006382) funded by the Korean government.

참고문헌

  1. Al-Dahawi, A., Ozturk, O., Emami, F., Yildirim, G. and Sahmaran, M. (2016), "Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials", Constr. Build. Mater., 104, 160-168. https://doi.org/10.1016/j.conbuildmat.2015.12.072
  2. Bae, S.J., Park, S. and Lee, H.K. (2020), "Role of Al in the crystal growth of alkali-activated fly ash and slag under a hydrothermal condition", Constr. Build. Mater., 239, 117842. https://doi.org/10.1016/j.conbuildmat.2019.117842
  3. Bilotti, E., Zhang, H., Deng, H., Zhang, R., Fu, Q. and Peijs, T. (2013), "Controlling the dynamic percolation of carbon nanotube based conductive polymer composites by addition of secondary nanofillers: The effect on electrical conductivity and tunable sensing behaviour", Compos. Sci. Technol., 74, 85-90. https://doi.org/10.1016/j.compscitech.2012.10.008
  4. Chung, D.D.L. (2012), "Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing", Carbon, 50(9), 3342-3353. https://doi.org/10.1016/j.carbon.2012.01.031
  5. Dai, Y., Sun, M., Liu, C. and Li, Z. (2010), "Electromagnetic wave absorbing characteristics of carbon black cement-based composites", Cement Concrete Compos., 32, 508-513. https://doi.org/10.1016/j.cemconcomp.2010.03.009
  6. De Weerdt, K., Haha M, Ben., Le Saout, G., Kjellsen, K.O., Justnes, H., and Lothenbach, B. (2011), "Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash", Cement Concrete Res., 41, 279-291. https://doi.org/10.1016/j.cemconres.2010.11.014
  7. Ghafari, E., Ghahari, S.A., Costa, H., Julio, E., Portugal, A. and Duraes, L. (2016), "Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete", Constr. Build. Mater., 127, 43-48. https://doi.org/10.1016/j.conbuildmat.2016.09.123
  8. Gomis, J., Galao, O., Gomis, V., Zornoza, E. and Garces, P. (2015), "Self-heating and deicing conductive cement. Experimental study and modeling", Constr. Build. Mater., 75, 442-449. https://doi.org/10.1016/j.conbuildmat.2014.11.042
  9. Han, B., Yu, X. and Kwon, E. (2009), "A self-sensing carbon nanotube/cement composite for traffic monitoring", Nanotechnology, 20, 445501. https://doi.org/10.1088/0957-4484/20/44/445501
  10. Han, B., Zhang, L., Sun, S., Yu, X., Dong, X., Wu, T. and Ou, J. (2015), "Electrostatic self-assembled carbon nanotube/nano carbon black composite fillers reinforced cement-based materials with multifunctionality", Compos. Part A Appl. Sci. Manuf., 79, 103-115. https://doi.org/10.1016/j.compositesa.2015.09.016
  11. Han, B., Zhang, L., Zhang, C., Wang, Y., Yu, X. and Ou, J. (2016), "Reinforcement effect and mechanism of carbon fibers to mechanical and electrically conductive properties of cement-based materials", Constr. Build. Mater., 125, 479-489. https://doi.org/10.1016/j.conbuildmat.2016.08.063
  12. Hanjitsuwan, S., Chindaprasirt, P. and Pimraksa, K. (2011), "Electrical conductivity and dielectric property of fly ash geopolymer pastes", Int. J. Miner. Metall. Mater., 18, 94-99. https://doi.org/10.1007/s12613-011-0406-0
  13. Hanjitsuwan, S., Hunpratub S, Thongbai, P., Maensiri, S., Sata, V. and Chindaprasirt, P. (2014), "Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste", Cement Concrete Compos., 45, 9-14. https://doi.org/10.1016/j.cemconcomp.2013.09.012
  14. Hannan, M.A., Hassan, K. and Jern, K.P. (2018), "A review on sensors and systems in structural health monitoring: current issues and challenges", Smart Struct. Syst., Int. J., 22(5), 509-525. https://doi.org/10.12989/sss.2018.22.5.509
  15. Jang, D.I., Yun, G.E., Park, J.E. and Kim, Y.K. (2018), "Designing an attachable and power-efficient all-in-one module of a tunable vibration absorber based on magnetorheological elastomer", Smart Mater. Struct., 27, 85009. https://doi.org/10.1088/1361-665X/aacdbd
  16. Jang, D.I., Yoon, H.N., Nam, I.W. and Lee, H.K. (2020), "Effect of carbonyl iron powder incorporation on the piezoresistive sensing characteristics of CNT-based polymeric sensor", Compos. Struct., 244, 112260. https://doi.org/10.1016/j.compstruct.2020.112260
  17. Jang, D., Yoon, H.N., Seo, J., Park, S., Kil, T. and Lee, H.K. (2021a), "Improved electric heating characteristics of CNT-embedded polymeric composites with an addition of silica aerogel", Compos. Sci. Technol., 212, 108866. https://doi.org/10.1016/j.compscitech.2021.108866
  18. Jang, D., Yoon, H.N., Seo, J., Lee, H.K. and Kim, G.M. (2021b), "Effects of silica aerogel inclusion on the stability of heat generation and heat-dependent electrical characteristics of cementitious composites with CNT", Cement Concrete Compos., 115, 103861. https://doi.org/10.1016/j.cemconcomp.2020.103861
  19. Jang, D., Yoon, H.N., Farooq, S., Lee, H.K., and Nam, I.W. (2021c), "Influence of water ingress on the electrical properties and electromechanical sensing capabilities of CNT/cement composites", J. Build. Eng., 42, 103065. https://doi.org/10.1016/j.jobe.2021.103065
  20. Jang, D., Farooq, S.Z., Yoon, H.N. and Khalid, H.R. (2021d), "Design of a highly flexible and sensitive multi-functional polymeric sensor incorporating CNTs and carbonyl iron powder", Compos. Sci. Technol., 207, 108725. https://doi.org/10.1016/j.compscitech.2021.108725
  21. Jang, D., Yoon, H.N., Seo, J. and Yang, B. (2022), "Effects of exposure temperature on the piezoresistive sensing performances of MWCNT-embedded cementitious sensor", J. Build.. Eng., 47, 103816. https://doi.org/10.1016/j.jobe.2021.103816
  22. Jin, F., Xiao, S., Lu, L. and Wang, Y. (2016), "Efficient activation of high-loading sulfur by small CNTs confined inside a large CNT for high-capacity and high-rate lithium-sulfur batteries", Nano Lett., 16, 440-447. https://doi.org/10.1021/acs.nanolett.5b04105
  23. Juenger, M.C.G. and Siddique, R. (2015), "Recent advances in understanding the role of supplementary cementitious materials in concrete", Cement Concrete Res., 78, 71-80. https://doi.org/10.1016/j.cemconres.2015.03.018
  24. Khalid, H.R., Choudhry, I., Jang, D., Abbas, N., Haider, M.S. and Lee, H.K. (2021), "Facile Synthesis of Sprayed CNTs Layer-Embedded Stretchable Sensors with Controllable Sensitivity", Polymers (Basel), 13, 1-6. https://doi.org/10.3390/polym13020311
  25. Kim, H.K., Nam, I.W. and Lee, H.K. (2014a), "Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume", Compos. Struct., 107, 60-69. https://doi.org/10.1016/j.compstruct.2013.07.042
  26. Kim, H.K., Park, I.S. and Lee, H.K. (2014b), "Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio", Compos. Struct., 116, 713-719. https://doi.org/10.1016/j.compstruct.2014.06.007
  27. Kim, G.M., Naeem, F., Kim, H.K. and Lee, H.K. (2016), "Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites", Compos. Struct., 136, 162-170. https://doi.org/10.1016/j.compstruct.2015.10.010
  28. Kim, G.M., Yang, B.J., Cho, K.J., Kim, E.M. and Lee, H.K. (2017), "Influences of CNT dispersion and pore characteristics on the electrical performance of cementitious composites", Compos. Struct., 164, 32-42. https://doi.org/10.1016/j.compstruct.2016.12.049
  29. Kim, G.M., Nam, I.W., Yoon, H.N. and Lee, H.K. (2018a), "Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites", Compos. Struct., 185, 264-272. https://doi.org/10.1016/j.compstruct.2017.11.011
  30. Kim, G.M., Yang, B.J., Yoon, H.N. and Lee, H.K. (2018b), "Synergistic effects of carbon nanotube and carbon fiber on heat generation and electrical characteristics of cementitious composites", Carbon, 134, 283-292. https://doi.org/10.1016/j.carbon.2018.03.070
  31. Kim, G.M., Yoon, H.N. and Lee, H.K. (2018c), "Autogenous shrinkage and electrical characteristics of cement pastes and mortars with carbon nanotube and carbon fiber", Constr. Build. Mater., 177, 428-435. https://doi.org/10.1016/j.conbuildmat.2018.05.127
  32. Kim, Y.K., Kim, J., Jang, D., Kim, S. and Jung, W. (2018d), "A study on the effects of multiwall carbon nanotubes on dynamic stiffness of hydrophilic-base magnetorheological gel", Curr. Nanosci., 15, 319-323. https://doi.org/10.2174/1573413714666181023144334
  33. Kim, G.M., Kim, Y.K., Kim, Y.J., Seo, J.H., Yang, B.J. and Lee, H.K. (2019a), "Enhancement of the modulus of compression of calcium silicate hydrates via covalent synthesis of CNT and silica fume", Constr. Build. Mater., 198, 218-225. https://doi.org/10.1016/j.conbuildmat.2018.11.161
  34. Kim, G.M., Nam, I.W., Yang, B., Yoon, H.N., Lee, H.K. and Park, S. (2019b), "Carbon nanotube (CNT) incorporated cementitious composites for functional construction materials: The state of the art", Compos. Struct., 227, 111244. https://doi.org/10.1016/j.compstruct.2019.111244
  35. Krishansamy, L. and Arumulla, R.M.R. (2018), "A hybrid structural health monitoring technique for detection of subtle structural damage", Smart Struct. Syst., Int. J., 22(5), 587-609. https://doi.org/10.12989/sss.2018.22.5.587
  36. Monteiro, A.O., Cachim, P.B. and Costa, P.M.F.J. (2017), "Self-sensing piezoresistive cement composite loaded with carbon black particles", Cement Concrete Compos., 81, 59-65. https://doi.org/10.1016/j.cemconcomp.2017.04.009
  37. Nam, I.W. and Lee, H.K. (2016), "Synergistic effect of MWNT/fly ash incorporation on the EMI shielding/absorbing characteristics of cementitious materials", Constr. Build. Mater., 115, 651-661. https://doi.org/10.1016/j.conbuildmat.2016.04.082
  38. Nam, I.W., Souri, H. and Lee, H.K. (2016), "Percolation threshold and piezoresistive response of multi-wall carbon nanotube/cement composites", Smart Struct. Syst., Int. J., 18(2), 217-231. https://doi.org/10.12989/sss.2016.18.2.217
  39. Nasr, D.E., Slika, W.G. and Saad, G.A. (2018), "Uncertainty quantification for structural health monitoring applications", Smart Struct. Syst., Int. J., 22(4), 399-411. https://doi.org/10.12989/sss.2018.22.4.399
  40. Park, J.E., Yun, G.E., Jang, D.I. and Kim, Y.K. (2019), "Analysis of electrical resistance and impedance change of magnetorheological gels with DC and AC voltage for magnetometer application", Sensors, 19, 2510. https://doi.org/10.3390/s19112510
  41. Provis, J.L., Palomo, A. and Shi, C. (2015), "Advances in understanding alkali-activated materials", Cement Concrete Res., 78, 110-125. https://doi.org/10.1016/j.cemconres.2015.04.013
  42. Seo, J., Bae, S.J., Jang, D.I., Park, S., Yang, B. and Lee, H.K. (2020), "Thermal behavior of alkali-activated fly ash/slag with the addition of an aerogel as an aggregate replacement", Cement Concrete Compos., 106, 103462. https://doi.org/10.1016/j.cemconcomp.2019.103462
  43. Snellings, R., Chwast, J., Cizer, O., De Belie, N., Dhandapani, Y., Durdzinski, P., Elsen, J., Haufe, J., Hooton, D., Patapy, C. and Santhanam, M. (2018), "RILEM TC-238 SCM recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages", Mater. Struct. Constr., 51, 172. https://doi.org/10.1617/s11527-018-1298-5
  44. Tohidi, H., Hosseini-Hashemi, S.H. and Maghsoudpour, A. (2018), "Size-dependent forced vibration response of embedded micro cylindrical shells reinforced with agglomerated CNTs using strain gradient theory", Smart Struct. Syst., Int. J., 22(5), 527-546. https://doi.org/10.12989/sss.2018.22.5.527
  45. Ubertini, F., Laflamme, S., Ceylan, H., Materazzi, A.L., Cerni, G., Saleem, H., D'Alessandro, A. and Corradini, A. (2014), "Novel nanocomposite technologies for dynamic monitoring of structures: A comparison between cement-based embeddable and soft elastomeric surface sensors", Smart Mater. Struct., 23. https://doi.org/10.1088/0964-1726/23/4/045023
  46. Wu, Z., Shi, C. and He, W. (2017), "Comparative study on flexural properties of ultra-high performance concrete with supplementary cementitious materials under different curing regimes", Constr. Build. Mater., 136, 307-313. https://doi.org/10.1016/j.conbuildmat.2017.01.052
  47. Xiao, L. and Li, Z. (2008), "Early-age hydration of fresh concrete monitored by non-contact electrical resistivity measurement" Cement Concrete Res., 38, 312-319. https://doi.org/10.1016/j.cemconres.2007.09.027
  48. Xie, N., Shi, X., Feng, D., Kuang, B. and Li, H. (2012), "Percolation backbone structure analysis in electrically conductive carbon fiber reinforced cement composites", Compos. Part B Eng., 43, 3270-3275. https://doi.org/10.1016/j.compositesb.2012.02.032
  49. Yoon, H.N., Jang, D., Lee, H.K. and Nam, I.W. (2020a), "Influence of carbon fiber additions on the electromagnetic wave shielding characteristics of CNT-cement composites", Constr. Build. Mater., 269, 121238. https://doi.org/10.1016/j.conbuildmat.2020.121238
  50. Yoon, H.N., Seo, J., Kim, S., Lee, H.K. and Park, S. (2020b), "Characterization of blast furnace slag-blended Portland cement for immobilization of Co", Cement Concrete Res., 134, 106089. https://doi.org/10.1016/j.cemconres.2020.106089
  51. Zeng, Q., Li, K., Fen-Chong, T. and Dangla, P. (2012), "Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes", Constr. Build. Mater., 27, 560-569. https://doi.org/10.1016/j.conbuildmat.2011.07.007
  52. Zornoza, E., Catala, G., Jimenez, F., Andion, L.G. and Garces, P. (2010), "Electromagnetic interference shielding with Portland cement paste containing carbon materials and processed fly ash", Mater. Constr., 60, 21-32. https://doi.org/10.3989/mc.2010.51009