KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Performance Evaluation on Ended Block of Wide Flange PSC Girder for the Semi-Integral Bridges

광폭 플랜지 PSC 거더 단부 프리캐스트 블록을 활용한 반일체식교대교량의 구조성능 평가

  • Received : 2021.02.18
  • Accepted : 2021.04.02
  • Published : 2022.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Semi-integral abutment bridges are a type of integral abutment bridges. These bridges eliminate expansion joints on the structure and can be used in situations not suitable for full-integral abutment bridge. Moreover, Semi-integral bridges have excellent maintenance and can be economically constructed. This study is about precast wall-type blocks at each end which provide lateral support for PSC girder, as well as acting as retaining walls to resist longitudinal movement of semi-integral abutment bridge. The end-diaphragm connection between ended blocks of PSC girders can be achieved by in-suit nonshrinkage concrete. The results show that 3-point experiment of end-diaphragm beam have an acceptable performance which is so better than results of structural design. Moreover, the effects of backfill soil on semi-integral abutment bridge constructed are analyzed the behavior according to the temperature changes.

반일체식교대교량은 일체식 교대교량의 한 형식이다. 이 교량은 상부구조에서 신축조인트를 제거한 것으로 완전일체식 교대교량이 적용하지 못한 상황에 사용할 수 있으며, 유지관리 성능이 우수하고, 하부구조를 경제적으로 시공할 수 있다. 이 연구는 교대벽체의 일부를 PSC 거더의 단부 벽체형 블록 형태로 제작한 반일체식교대교량에 대한 것으로, 온도신축에 따라 종방향 이동에 저항 역할을 하는 프리캐스트 블록을 활용한 PSC 거더이다. 프리캐스트 블록 PSC 거더는 거더 단부에 프리캐스트 블록을 일체 타설하여 제작하며, 교대벽체 위에 단순거치한 후 무수축 콘크리트와 합성하는 방식으로 시공한다. 따라서 본 연구는 재하실험을 통해 구조계산한 결과에 비교하고자 하며, 나아가 실제 시공된 반일체식교대교량의 토압 및 상부구조 변위 계측하여 이를 분석을 통한 구조성능 평가하였다.

Keywords

References

  1. Arockiasamy, M. and Sivakumar, M. (2005). "Time-dependent behavior of continuous composite integral abutment bridges." Practice Periodical on Structural Design and Construction, Vol. 10, No. 3, pp. 161-170. https://doi.org/10.1061/(ASCE)1084-0680(2005)10:3(161)
  2. Cheung, J. H., Kang, C. H., Kim, N. S. and Park, Y. M. (2008). "Development of shape determination program for suspension bridge using digital image processing." Magazine of the Korea Institute for Structural Maintenance and Inspection, Vol. 12, No. 1, pp. 117-126 (in Korean).
  3. Choi, Y. G. and Jang, I. Y. (2018). "A study of structural behavior analysis of integral and semi-integral hybrid slab bridge." Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 22, No. 1, pp. 123-128 (in Korean). https://doi.org/10.11112/JKSMI.2018.22.1.123
  4. Das, B. M. (2002). Principles of geotechnical engineering, 5th edition, Thomson Learning Asia, Singapore.
  5. Dicleli, M. (2005). "Integral abutment-backfill behavior on sand soil-pushover analysis approach." Jounral of Bridge Engineering, Vol. 10, No. 3, pp. 354-364. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(354)
  6. Faraji, S., Ting, J. M., Crovo, D. S. and Ernst, H. (2001). "Nonlinear analysis of integral bridges: finite-element model." Jounral of Geotechnical and Geoenvironmental Engineering, Vol. 127, No. 5, pp. 454-461. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:5(454)
  7. Kim, W. S., Lee, J. H. and Park, T. H. (2013). "Development of abutment-H pile connection for large lateral displacements of integral abutment bridges." Journal of Computational Structural Engineering Institute of Korea, Vol. 26, No. 4, pp. 309-318 (in Korean). https://doi.org/10.7734/COSEIK.2013.26.4.309
  8. Korea Expressway Corporation Research Institute (2018). Design manual for integral abutment bridges (Jointless Bridges), 2nd edition, Korea Expressway Corporation (in Korean).
  9. Park, J. M., Jeon, S. Y., Lee, S. D., You, S. K. and Kim, C. S. (2016). "BIB girder with precast end diaphragm for jointless bridges." The Magazine of the Korean Society for Advanced Composite Structures, Vol. 7, No. 1, pp. 25-30 (in Korean). https://doi.org/10.11004/kosacs.2016.7.1.025
  10. Park, J. M., Kim, J. B., Jun, S. Y., Kim, C. S., You, S. K. and Park, J. B. (2014). "Study on the field contstruction of semi-integral bridge with PSC girder integrating end-diaphragm." Journal of the Korean Society for Advanced Composite Structures, Vol. 5, No. 2, pp. 21-26 (in Korean). https://doi.org/10.11004/kosacs.2014.5.2.021
  11. Steinberg, E., Sargand, S. M. and Bettinger, C. (2004). "Forces in wingwalls of skewed semi-integral bridges." Jounral of Bridge Engineering, Vol. 9, No. 6, pp. 563-571. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:6(563)