Acknowledgement
This work was supported by KIMM Institutional Program (NK236F) and NST/KIMM.
References
- F. Butti, P. Bruschi, M. Dei, and M. Piotto, "A compact instrumentation amplifier for MEMS thermal sensor interfacing", Analog Integrat. Circuits Signal Process., Vol. 72, No. 3, pp. 585-594, 2012. https://doi.org/10.1007/s10470-011-9661-2
- Q. Ma, K. Huang, Z. Yu, and Z. Wang, "A MEMS-based electric field sensor for measurement of high-voltage DC synthetic fields in air", IEEE Sens. J., Vol. 17, No. 23, pp. 7866-7876, https://doi.org/10.1109/JSEN.2017.2762327
- J. Lan and Y. Shi, "Vehicle detection and recognition based on a MEMS magnetic sensor", in 2009 4th IEEE Int. Conf. Nano/Micro Eng. Mol. Syst., pp. 404-408, 2019.
- H. Liu, L. Zhang, K. H. H. Li, and O. K. Tan, "Microhotplates for metal oxide semiconductor gas sensor applications-Towards the CMOS-MEMS monolithic approach", Micromachines, Vol. 9, No. 11, pp. 557(1)-557(24), 2018.
- H. Qu, "CMOS MEMS fabrication technologies and devices", Micromachines, Vol. 7, No. 1, pp. 14(1)-14(21), 2016. https://doi.org/10.3390/mi7010001
- H. J. Kim, S. I. Jung, J. Segovia-Fernandez, and G. Piazza, "The impact of electrode materials on 1/f noise in piezoelectric AlN contour mode resonators", AIP Adv., Vol. 8, No. 5, pp. 055009(1)-055009(8), 2018.
- V. M. Mecea, "From Quartz Crystal Microbalance to Fundamental Principles of Mass Measurements," Anal. Lett., Vol. 38, No. 5, pp. 753-767, 2005. https://doi.org/10.1081/AL-200056171
- J. Zheng, J. Zhou, P. Zeng, Y. Liu, Y. Shen, W. Yao, Z. Chen, J. Wu, S. Xiong, Y. Chen, X. Shi, J. Liu, Y. Fu, and H. Duan, "30 GHz surface acoustic wave transducers with extremely high mass sensitivity," Appl. Phys. Lett., Vol. 116, No. 12, p. 123502, 2020.
- H. Seh, T. Hyodo, and H. L. Tuller, "Bulk acoustic wave resonator as a sensing platform for NOx at high temperatures", Sens. Actuators B: Chem., Vol. 108, No. 1-2, pp. 547-552, 2005. https://doi.org/10.1016/j.snb.2004.11.083
- A. Kochhar, A. Mahmoud, Y. Shen, N. Turumella, and G. Piazza, "X-Cut Lithium Niobate-Based Shear Horizontal Resonators for Radio Frequency Applications", J. Microelectromech.Syst., Vol. 29, No. 6, pp. 1464-1472, 2020. https://doi.org/10.1109/JMEMS.2020.3026167
- J. C. Doll, B. C. Petzold, B. Ninan, R. Mullapudi, and B. L. Pruitt, "Aluminum nitride on titanium for CMOS compatible piezoelectric transducers", J. Micromech. Microeng., Vol. 20, No. 2, p. 025008, 2009.
- Z. Xu and Z. Li, "Dynamic humidity response of surface acoustic wave sensors based on zinc oxide nanoparticles sensitive film", Appl. Phys. A, Vol. 127, No. 6, pp. 1-7, 2021. https://doi.org/10.1007/s00339-020-04132-x
- C. Lam, "A review of the recent development of MEMS and crystal oscillators and their impacts on the frequency control products industry", in 2008 IEEE Ultrason. Symp., pp. 694-704, 2008.
- B. Murashov and Y. P. Tsvetkov, "Instrument for checking quartz-crystal oscillators with standard frequency signals in the long-wave and very-long-wave ranges", Meas. Tech., Vol. 19, No. 7, pp. 1012-1015, 1976. https://doi.org/10.1007/BF00821917
- A. Javadi, A. Solouk, M. H. Nazarpak, and F. Bagheri, "Surface engineering of titanium-based implants using electro-spraying and dip coating methods", Mater. Sci. Eng. C, Vol. 99, pp. 620-630, 2019. https://doi.org/10.1016/j.msec.2019.01.027
- S. K. Boda, X. Li, and J. Xie, "Electrospraying an enabling technology for pharmaceutical and biomedical applications: A review", J. Aerosol Sci., Vol. 125, pp. 164-181, 2018. https://doi.org/10.1016/j.jaerosci.2018.04.002
- A. Wajid, "On the accuracy of the quartz-crystal microbalance (QCM) in thin-film depositions", Sens. Actuators a: Phys., Vol. 63, No. 1, pp. 41-46, 1997. https://doi.org/10.1016/S0924-4247(97)80427-X
- M. Chen, F. J. Romay, L. Li, A. Naqwi, and V. A. Marple, "A novel quartz crystal cascade impactor for real-time aerosol mass distribution measurement", Aerosol Sci. Technol., Vol. 50, No. 9, pp. 971-983, 2016. https://doi.org/10.1080/02786826.2016.1213790
- J.-S. Choi and W.-T. Park, "MEMS particle sensor based on resonant frequency shifting", Micro Nano Syst. Lett., Vol. 8, No. 1, pp. 1-6, 2020. https://doi.org/10.1186/s40486-019-0101-x
- U. Soysal, E. Gehin, E. Algre, B. Berthelot, G. Da, and E. Robine, "Aerosol mass concentration measurements: Recent advancements of real-time nano/micro systems", J. Aerosol Sci., Vol. 114, pp. 42-54,
- J. Zhao, M. Liu, L. Liang, W. Wang, and J. Xie, "Airborne particulate matter classification and concentration detection based on 3D printed virtual impactor and quartz crystal microbalance sensor", Sens. Actuators A: Phys., Vol. 238, pp. 379-388, 2016. https://doi.org/10.1016/j.sna.2015.12.029
- D. Liang, W.-P. Shih, C.-S. Chen, and C.-A. Dai, "A miniature system for separating aerosol particles and measuring mass concentrations", Sens., Vol. 10, No. 4, pp. 3641-3654, 2010. https://doi.org/10.3390/s100403641
- D. Johannsmann, A. Langhoff, and C. Leppin, "Studying soft interfaces with shear waves: Principles and applications of the Quartz Crystal Microbalance (QCM)", Sens., Vol. 21, No. 10, pp. 3490(1)-3490(79), 2021.
- I. R. Jang, J. Park, C. Ryu, S. I. Jung, H. N. Kim, S. B. Kim, and H. J. Kim, "High Precision Liquid Salinity Sensing Using a CNT Coated Quartz Crystal Microbalance", IEEE Sens. J., Vol. 22, No. 8, pp. 7684-7691, 2022.
- I. R. Jang, S. I. Jung, G. Lee, I. Park, S. B. Kim, and H. J. Kim, "Quartz crystal microbalance with thermally-controlled surface adhesion for an efficient fine dust collection and sensing", J. Hazard.Mater., Vol. 424, p. 127560, 2022.
- N. D. Ngo, J. Lee, M.-W. Kim, and J. Jang, "Measurement of PM 2.5 Mass Concentration Using an Electrostatic Particle Concentrator-Based Quartz Crystal Microbalance", IEEE Access, Vol. 7, pp. 170640-170647, 2019. https://doi.org/10.1109/access.2019.2955377
- J. Liang, D. Kong, and C. Liu, "Study on Dual Channel Lateral Field Excitation Quartz Crystal Microbalance for Measuring Liquid Electrical Properties", Sens., Vol. 19, No. 5, pp. 1253(1)-1253(11), 2019.
- X. Huang, Q. Chen, W. Pan, and Y. Yao, "Advances in the Mass Sensitivity Distribution of Quartz Crystal Microbalances: A Review", Sens., Vol. 22, No. 14, pp. 5112(1)-5112(20), 2022.
- P. Sun, Y. Jiang, G. Xie, X. Du, and J. Hu, "A room temperature supramolecular-based quartz crystal microbalance (QCM) methane gas sensor", Sens. Actuators B: Chem., Vol. 141, No. 1, pp. 104-108, 2009. https://doi.org/10.1016/j.snb.2009.06.012
- W. Chen, F. Deng, M. Xu, J. Wang, Z. Wei, and Y. Wang, "GO/Cu2O nanocomposite based QCM gas sensor for trimethylamine detection under low concentrations", Sens Actuators B: Chem., Vol. 273, pp. 498-504, 2018. https://doi.org/10.1016/j.snb.2018.06.062
- T. Addabbo, A. Fort, M. Mugnaini, V. Vignoli, A. Baldi, and M. Bruzzi, "Quartz-crystal microbalance gas sensors based on TiO 2 nanoparticles", EEE Trans. Instrum. Meas., Vol. 67, No. 3, pp. 722-730, 2018. https://doi.org/10.1109/TIM.2017.2785118
- M. Matsuguchi and Y. Kadowaki, "Poly (acrylamide) derivatives for QCM-based HCl gas sensor applications", Sens. Actuators B: Chem., Vol. 130, No. 2, pp. 842-847, 2008. https://doi.org/10.1016/j.snb.2007.10.049
- A. Fort, A. Lo Grasso, M. Mugnaini, E. Panzardi, and V. Vignoli, "QCM Measurements of RH with Nanostructured Carbon-Based Materials: Part 1-Theory and Model", Chemosensors, Vol. 10, No. 8, pp. 315(1)-315(13), 2022.
- P. Bhattacharyya, "Technological journey towards reliable microheater development for MEMS gas sensors: A review", IEEE Trans. Device Mater. Reliab., Vol. 14, No. 2, pp. 589-599, 2014. https://doi.org/10.1109/TDMR.2014.2311801
- I. R. Jang, S. I. Jung, J. Park, C. Ryu, I. Park, S. B. Kim, and H. J. Kim, "Direct and controlled device integration of graphene oxide on Quartz Crystal Microbalance via electrospray deposition for stable humidity sensing", Ceram. Int., Vol. 48, No. 6, pp. 8004-8011, 2021.
- W. Li, J. Lin, X. Wang, J. Jiang, S. Guo, and G. Zheng, "Electrospray deposition of ZnO thin films and its application to gas sensors", Micromachines, Vol. 9, No. 2, pp. 66(1)-66(7), 2018.
- Y. Yao, X. Huang, Q. Chen, Z. Zhang, and W. Ling, "High sensitivity and high stability QCM humidity sensors based on polydopamine coated cellulose nanocrystals/graphene oxide nanocomposite", Nanomater., Vol. 10, No. 11, pp. 2210(1)-2210(12), 2020.
- W. Tao, P. Lin, S. Liu, Q. Xie, S. Ke, and X. Zeng, "1-butyl-3-methylimidazolium tetrafluoroborate film as a highly selective sensing material for non-invasive detection of acetone using a quartz crystal microbalance", Sens., Vol. 17, No. 1, pp. 194(1)-194(12), https://doi.org/10.3390/s17010001
- E. Oleneva, T. Kuchmenko, E. Drozdova, A. Legin, and D. Kirsanov, "Identification of plastic toys contaminated with volatile organic compounds using QCM gas sensor array", Talanta, Vol. 211, p. 120701, 2020.
- K. Triyana, A. Sembiring, A. Rianjanu, S. N. Hidayat, R. Riowirawan, T. Julian, A. Kusumaatmaja, I. Santoso, and R. Roto, "Chitosan-based quartz crystal microbalance for alcohol sensing", Electron., Vol. 7, No. 9, pp. 181(1)-181(11), 2018.
- I. Mannelli, M. Minunni, S. Tombelli, and M. Mascini, "Quartz crystal microbalance (QCM) affinity biosensor for genetically modified organisms (GMOs) detection", Biosens. bioelectron., Vol. 18, No. 2-3, pp. 129-140, 2003. https://doi.org/10.1016/S0956-5663(02)00166-5
- R. Z. Hao, H. B. Song, G. M. Zuo, R. F. Yang, H. P. Wei, D. B. Wang, Z. Q. Cuia, Z. P. Zhang, Z. X. Cheng, and X. E. Zhang, "DNA probe functionalized QCM biosensor based on gold nanoparticle amplification for Bacillus anthracis detection", Biosens. Bioelectron., Vol. 26, No. 8, pp. 3398-3404, 2011. https://doi.org/10.1016/j.bios.2011.01.010
- M. Z. Atashbar, B. Bejcek, A. Vijh, and S. Singamaneni, "QCM biosensor with ultra thin polymer film", Sens. Actuators B: Chem., Vol. 107, No. 2, pp. 945-951, 2005. https://doi.org/10.1016/j.snb.2004.12.047
- S.-R. Hong, H.-D. Jeong, and S. Hong, "QCM DNA biosensor for the diagnosis of a fish pathogenic virus VHSV", Talanta, Vol. 82, No. 3, pp. 899-903, 2010. https://doi.org/10.1016/j.talanta.2010.04.065
- M. Lazerges, H. Perrot, N. Zeghib, E. Antoine, and C. Compere, "In situ QCM DNA-biosensor probe modification", Sens. Actuators B: Chem., Vol. 120, No. 1, pp. 329-337, 2006. https://doi.org/10.1016/j.snb.2006.02.024
- C. Zhang, G. Feng, and Z. Gao, "Development of a new kind of dual modulated QCM biosensor", Biosens. Bioelectron., Vol. 12, No. 12, pp. 1219-1225, 1997. https://doi.org/10.1016/S0956-5663(97)00065-1
- A. Afzal, A. Mujahid, R. Schirhagl, S. Z. Bajwa, U. Latif, and S. Feroz, "Gravimetric viral diagnostics: QCM based biosensors for early detection of viruses", Chemosensors, Vol. 5, No. 1, pp. 7(1)-7(25), https://doi.org/10.3390/chemosensors5010001
- T. Wasilewski, B. Szulczynski, D. Dobrzyniewski, W. Jakubaszek, J. Gebicki, and W. Kamysz, "Development and Assessment of Regeneration Methods for Peptide-Based QCM Biosensors in VOCs Analysis Applications", Biosens., Vol. 12, No. 5, pp. 309(1)-309(14), 2022.
- Z. Farka, D. Kovar, and P. Skladal, "Rapid detection of microorganisms based on active and passive modes of QCM", Sens., Vol. 15, No. 1, pp. 79-92, 2014. https://doi.org/10.3390/s150100079
- M. Yilmaz, M. Bakhshpour, I. Gokturk, A. K. Piskin, and A. Denizli, "Quartz crystal microbalance (QCM) based biosensor functionalized by HER2/Neu antibody for breast cancer cell detection", Chemosensors, Vol. 9, No. 4, pp. 80(1)-80(15), 2021.
- V. Ratautaite, S. N. Topkaya, L. Mikoliunaite, M. Ozsoz, Y. Oztekin, A. Ramanaviciene, and A. Ramanavicius, "Molecularly imprinted polypyrrole for DNA determination", Electroanalysis, Vol. 25, No. 5, pp. 1169-1177, 2013. https://doi.org/10.1002/elan.201300063
- I. Baleviciute, V. Ratautaite, A. Ramanaviciene, Z. Balevicius, J. Broeders, D. Croux, M. McDonald, F. Vahidpour, R. Thoelen, W. D. Ceuninck, K. Haenen, M. Nesladek, A. Reza, and A. Ramanavicius, "Evaluation of theophylline imprinted polypyrrole film", Synthetic Metals, Vol. 209, pp. 206-211, 2015. https://doi.org/10.1016/j.synthmet.2015.07.021
- V. Ratautaite, D. Plausinaitis, I. Baleviciute, L. Mikoliunaite, A. Ramanaviciene, and A. Ramanavicius, "Characterization of caffeine-imprinted polypyrrole by a quartz crystal microbalance and electrochemical impedance spectroscopy", Sens. Actuators B: Chem., Vol. 212, pp. 63-71, 2015. https://doi.org/10.1016/j.snb.2015.01.109
- G. Sauerbrey, "Verwendung von Schwingquarzen zur Wagung dunner Schichten und zur Mikrowagung", Zeitschrift fur physik, Vol. 155, No. 2, pp. 206-222, 1959. https://doi.org/10.1007/BF01337937
- I. Plikusiene, V. Maciulis, A. Ramanavicius, and A. Ramanaviciene, "Spectroscopic Ellipsometry and Quartz Crystal Microbalance with Dissipation for the Assessment of Polymer Layers and for the Application in Biosensing", Polym., Vol. 14, No. 5, p. 1056(1)-1056(21), 2022.
- S. Akgonullu, E. Ozgur, and A. Denizli, "Quartz Crystal Microbalance-Based Aptasensors for Medical Diagnosis", Micromachines, Vol. 13, No. 9, p. 1441(1)-1441(18), 2022.
- W. Shan, Y. Pan, H. Fang, M. Guo, Z. Nie, Y. Huang, and S. Yao., "An aptamer-based quartz crystal microbalance biosensor for sensitive and selective detection of leukemia cells using silver-enhanced gold nanoparticle label", Talanta, Vol. 126, pp. 130-135, 2014. https://doi.org/10.1016/j.talanta.2014.03.056
- L. Wang, R. Wang, F. Chen, T. Jiang, H. Wang, M. Slavik, H. Wei, and Y. Li, "QCM-based aptamer selection and detection of Salmonella typhimurium", Food chemistry, Vol. 221, pp. 776-782, 2017. https://doi.org/10.1016/j.foodchem.2016.11.104