Acknowledgement
This material is based upon work supported by the Ministry of Trade, Industry and Energy (MOTIE, Korea) under the Industrial Technology Innovation Program (no. 20003750) and the National Research Council of Science and Technology (NST) grant funded by the Korea government (MSIP) (no. CRC-19-02-ETRI).
References
- M. D. Xu and Y. F. Liu, Editorial special issue on green power supplies, IEEE J. Emerg. Sel. Top. Power Electron. 4 (2016), no. 2, 333-334. https://doi.org/10.1109/JESTPE.2016.2550639
- M. J. Sathik et al., Switched-capacitor multilevel inverter with self-voltage-balancing for high-frequency power distribution system, IET Power Electron. 13 (2020), no. 9, 1807-1818. https://doi.org/10.1049/iet-pel.2019.1249
- L. Yu et al., A split-field-windings doubly salient brushless DC generator with reduced excitation capacity for hybrid electric vehicles, IEEE Trans. Ind. Electron. 65 (2018), no. 10, 7697-7708. https://doi.org/10.1109/tie.2018.2801812
- Y. Su, Q. Li, and F. C. Lee, Design and evaluation of a highfrequency LTCC inductor substrate for a three-dimensional integrated DC/DC converter, IEEE Trans. Power Electron. 28 (2013), no. 9, 4354-4364. https://doi.org/10.1109/TPEL.2012.2236359
- W. Meng et al., High dv/dt noise modeling and reduction on control circuits of GaN-based full bridge inverters, IEEE Trans. Power Electron. 34 (2019), no. 12, 12246-12261. https://doi.org/10.1109/tpel.2019.2903818
- Z. Zhang et al., Switching loss analysis considering parasitic loop inductance with current source drivers for buck converters, IEEE Trans. Power Electron. 26 (2011), no. 7, 1815-1819. https://doi.org/10.1109/TPEL.2010.2096476
- B. Zhang and S. Wang, Parasitic inductance modeling and reduction for wire-bonded half-bridge SiC multichip power module, IEEE Trans. Power Electron. 36 (2021), no. 5, 5892-5903. https://doi.org/10.1109/TPEL.2020.3032521
- C. Chen et al., Flexible PCB-based 3-D integrated SiC halfbridge power module with three-sided cooling using ultralow inductive hybrid packaging structure, IEEE Trans. Power Electron. 34 (2019), no. 6, 5579-5593. https://doi.org/10.1109/tpel.2018.2866404
- K. Wang et al., A multiloop method for minimization of parasitic inductance in GaN-based high-frequency DC-DC converter, IEEE Trans. Power Electron. 32 (2017), no. 6, 4728-4740. https://doi.org/10.1109/TPEL.2016.2597183
- A. B. Jorgensen et al., A fast-switching integrated full-bridge power module based on GaN eHEMT devices, IEEE Trans. Power Electron. 34 (2019), no. 3, 2494-2504. https://doi.org/10.1109/tpel.2018.2845538
- D. Y. Jung et al., Power semiconductor SMD package embedded in multilayered ceramic for low switching loss, ETRI J. 39 (2017), no. 6, 866-873. https://doi.org/10.4218/etrij.17.0117.0113
- Y. Chang et al., Compact sandwiched press-pack SiC power module with low stray inductance and balanced thermal stress, IEEE Trans. Power Electron. 35 (2020), no. 3, 2237-2241. https://doi.org/10.1109/tpel.2019.2934709
- D. Atanu and S. A. Simon, A module-level springinterconnected stack power module, IEEE Trans. Compon. Packag. Manuf. Technol. 9 (2019), no. 1, 88-95. https://doi.org/10.1109/tcpmt.2018.2823708
- W. J. Chang et al., Design of parasitic inductance reduction in GaN cascode FET for high-efficiency operation, ETRI J. 38 (2016), no. 1, 133-140. https://doi.org/10.4218/etrij.16.0115.0019
- D. Y. Jung et al., Design and evaluation of cascode GaN FET for switching power conversion systems, ETRI J. 39 (2017), no. 1, 62-68. https://doi.org/10.4218/etrij.17.0116.0173
- F. Yang et al., Electrical performance advancement in SiC power module package design with Kelvin drain connection and low parasitic inductance, IEEE J. Emerg. Sel. Topics Power Electron. 7 (2019), 84-98. https://doi.org/10.1109/jestpe.2018.2870248
- K. K. Lwin et al., Copper clip package for high performance MOSFETs, in Proc. IEEE Electron. Packag. Technol. Conf. (EPTC), (Singapore, Singapore), Nov. 2016, pp. 123-128.
- L. Liu et al., Investigation on copper clip bonding structure for power package, in Proc. IEEE Int. Conf. Electron. Packag. Technol. (ICEPT), (Shanghai, China), Aug. 2018, pp. 1042-1046.
- Q. Zhu et al., Thermal characterization of copper-clip-bonded IGBT module with double sided cooling, in Proc. IEEE Int. Workshop Therm. Investig. ICs Syst. (THERMINIC), (Amsterdam, Netherlands), Sept. 2017, pp. 1-6.
- F. Yang et al., Interleaved critical mode boost PFC converter with coupled inductor, IEEE Trans. Power Electron. 26 (2011), no. 9, 2404-2413. https://doi.org/10.1109/TPEL.2011.2106165
- F. W. Grover, Inductance Calculation, Dover Publication, NY, USA, 2009.
- T. Meade et al., Parasitic inductance effects on Switching losses for a high frequency DC-DC converter, in Proc. IEEE Appl. Power Electron. Conf. Expo. (APEC), (Austin, TX, USA), Feb. 2008, pp. 3-9.
- R. Javidi and M. Nymand, A new method of measuring winding AC resistance of high-efficiency power inductors, IEEE Trans. Power Electron. 33 (2018), no. 12, 10736-10747. https://doi.org/10.1109/tpel.2018.2805867
- C. D. Meyer et al., Influence of layer thickness on the performance of stacked thick-film copper air-core power inductors, IEEE Trans. Mag. 48 (2012), no. 11, 4436-4439. https://doi.org/10.1109/TMAG.2012.2197185
- T. Wang and Y. F. Lu, Fast and accurate frequency-dependent behavioral model of bonding wires, IEEE Trans. Ind. Appl. 13 (2017), no. 5, 2389-2396.
- H. Shinagawa et al., Theoretical analysis of AC resistance in coil using magnetoplated wire, IEEE Trans. Magn. 45 (2009), no. 9, 3251-3259. https://doi.org/10.1109/tmag.2009.2021948
- H. Johnson and M. Graham, High-Speed Signal Propagation, Pearson, London, UK, 2003.
- H. Cha et al., Design and development of high-power DC-DC converter for metro vehicle system, IEEE Trans. Ind. Appl. 44 (2008), no. 6, 1795-1804. https://doi.org/10.1109/TIA.2008.2006324
- R. P. Wojda and M. K. Kazimierczuk, Winding resistance and power loss inductors with litz and solid-round wires, IEEE Trans. Ind. Appl. 54 (2018), no. 4, 3548-3557. https://doi.org/10.1109/tia.2018.2821647
- H. Shigekane, H. Kirihata, and Y. Uchida, Developments in modern high power semiconductor devices, in Proc. Int. Symp. Power Semicond. ICs (ISPSD), (Monterey, CA, USA), May 1993, pp. 16-21.
- H. Wang, F. Wang, and J. Zhang, Power semiconductor device figure of merit for high-power-density converter design applications, IEEE Trans. Electron Devices 55 (2008), no. 1, 446-470. https://doi.org/10.1109/TED.2007.911097
- G. Galli et al., Paschen's law in extreme pressure and temperature conditions, IEEE Trans. Plasma Sci. 47 (2019), no. 3, 1641-1647. https://doi.org/10.1109/tps.2019.2896352
- D. Y. Jung et al., Multi-layer ceramic-based surface mount device packaging for 1200 V and 1700 V SiC SBD power semiconductor, in Proc. IEEE/IEIE Int. Conf. Consum. Electron.-ASIA (ICCEAsia), (Seoul, South Korea), Nov. 2020, pp. 603-606.
- T. Sugimoto, K. Chiba, and Y. Higashima, Corona and spark discharges occurring between a grounded sphere and an array of charged multiple electrodes, IEEE Trans. Ind. Appl. 42 (2006), no. 3, 881-886. https://doi.org/10.1109/TIA.2006.873659
- S. Pekarek, Atmospheric-air needle-to-cylinder DC discharges in magnetic field, IEEE Trans. Plasma Sci. 39 (2011), no. 11, 2206-2207. https://doi.org/10.1109/TPS.2011.2129529
- P. Nayak and K. Hatua, Parasitic inductance and capacitanceassisted active gate driving technique to minimize switching loss of SiC MOSFET, IEEE Trans. Ind. Electron. 64 (2017), no. 10, 8288-8298. https://doi.org/10.1109/TIE.2017.2711512
- L. Ying et al., Numerical and experimental analysis of AC loss of YBCO coated conductor carrying DC and AC offet transport current, IEEE Trans. Appl. Supercond. 23 (2013), no. 3, 1-4. https://doi.org/10.1109/TASC.2013.2290233