DOI QR코드

DOI QR Code

Effect of freeze-thaw cycles on the mechanical properties and constitutive model of saline soil

  • Cheng, Shukai (College of Construction Engineering, Jilin University) ;
  • Wang, Qing (College of Construction Engineering, Jilin University) ;
  • Fu, Huicheng (Jilin Provincial Water Resources Department) ;
  • Wang, Jiaqi (College of Construction Engineering, Jilin University) ;
  • Han, Yan (College of Construction Engineering, Jilin University) ;
  • Shen, Jiejie (College of Construction Engineering, Jilin University) ;
  • Lin, Sen (Jilin Provincial Water Resources Department)
  • Received : 2020.10.11
  • Accepted : 2021.10.18
  • Published : 2021.11.25

Abstract

The freeze-thaw cycle is one of the most common natural physical processes in cold regions and will significantly affect the deformation characteristics of saline soil. To study the mechanical properties and constitutive relationship of saline soil under freeze-thaw cycles, in this paper, a series of freeze-thaw cycle tests and consolidated-drained (CD) triaxial tests were conducted on remodeled saline soil in the Qian'an area of western Jilin, China. Based on the elliptic-parabolic double yield surface constitutive model, a modified model considering the effects of freeze-thaw cycles is established. The results show that the specimen exhibits a strain-hardening stress-strain relationship, and the volumetric strain during shearing exhibits a shear-shrinkage characteristic overall. As the number of freeze-thaw cycles increases, the volumetric strain gradually increases, and the shear strength gradually decreases. As the confining pressure increases, the volumetric strain gradually increases. Then, the elliptic function and parabolic function are selected to describe the volume yield surface and the shear yield surface on the p-q plane respectively. By introducing the correlation flow rule, the functional relationship between the deviating stress increment and the axial strain increment and volumetric strain increment is derived. Based on the results of the triaxial test, the variation in the model parameters with the number of freeze-thaw cycles was determined. The results show that as the number of freeze-thaw cycles increases, c, φ, h, K, n, M1, M2, and a show a decreasing rule, while t shows a gradually increasing rule, and all factors can use logistic function to fit the regression relationship between the model parameters and the number of freeze-thaw cycles. The expression of the model parameters with the number of freeze-thaw cycles as a factor is substituted into the stress-strain increment constitutive equation, and a modified double yield surface model considering the effects of freeze-thaw cycles is established. The calculated values of the model are basically consistent with the measured values. This shows that the double yield surface constitutive model can be applied to saline soil.

Keywords

Acknowledgement

This work was supported by the Key Program of International (Regional) Cooperation and Exchange of National Natural Science Foundation (Grant No. 41820104001), the Special Fund for Major Scientific Instruments of the National Natural Science Foundation of China (Grant No. 41627801) and A project funded by the Jilin Provincial Water Resources Department (Grant No.126002-2020-0001). We sincerely thank all the reviewers and editors for their professional comments and suggestions regarding this manuscript.

References

  1. Asoka, A., Nakano, M. and Noda, T. (2000), "Super loading yield surface concept for highly structured soil behavior", Soil. Foundation., 40(2), 99-110. http://doi.org/10.3208/sandf.40.2_99.
  2. ASTM D2487-11 (2011), Standard practice for classification of soils for engineering purposes (unified soil classification system), ASTM International; PA, USA. http://doi.org/10.1520/D2487-11
  3. Bai, X.D., Cheng, W.C., Ong, D.E.L. and Li, G. (2021), "Evaluation of geological conditions and clogging of tunneling using machine learning", Geomech. Eng., 25(1), 59-73. http://doi.org/10.12989/gae.2021.25.1.059.
  4. Bao, S., Wang, Q. and Bao, X. (2013), "Study on dispersive influencing factors of dispersive soil in western Jilin based on grey correlation degree method", Appl. Mech. Mater., 291-294, 1096-1100. http://doi.org/10.4028/www.scientific.net/amm.291-294.1096.
  5. Chang, D. and Lai, Y. (2018), "A double-yield-surface model for frozen saline sandy soil incorporating particle crushing", Proceedings of China-Europe Conference on Geotechnical Engineering, Vienna, August. https://doi.org/10.1007/978-3-319-97115-5_95.
  6. Chang, D., Lai, Y. and Yu, F. (2019), "An elastoplastic constitutive model for frozen saline coarse sandy soil undergoing particle breakage", Acta Geotechnica, 14, 1757-1783. https://doi.org/10.1007/s11440-019-00775-0.
  7. Chang, D., Liu, J. and Li, X. (2015), "Experimental study on yielding and strength properies of silty sand under freezingthawing cycles", Chinese J. Rock Mech. Eng., 34(8), 1721-1728. http://doi.org/10.13722/j.cnki.jrme.2014.1643.
  8. Chang, D., Liu, J. and Li, X. (2016), "A constitutive model with double yielding surfaces for silty sand after freeze-thaw cycles", Chinese J. Rock Mech. Eng., 35(3), 623-630. https://doi.org/10.13722/j.cnki.jrme.2015.0505.
  9. Chen, Z. and Zhu, J. (2016), "A modified ellipse-parabola double yield surfaces model on gravelly soil", J. Fuzhou University (Natural Science Edition), 44(6), 874-880. http://doi.org/10.7631/issn.1000-2243.2016.06.0874.
  10. Cheng, W.C., Duan, Z., Xue, Z.F. and Wang, L. (2021), "Sandbox modelling of interactions of landslide deposits with terrace sediments aided by field observation", Bulletin Eng. Geology Environ., 80(4), 3711-3731. https://doi.org/10.1007/s10064-021-02144-2.
  11. Cui, H., Liu, J., Zhang, L. and Tian, Y. (2015), "A constitutive model of subgrade in a seasonally frozen area with considering freeze-thaw cycles", Rock Soil Mech., 36(08), 2228-2236. http://doi.org/10.16285/j.rsm.2015.08.014.
  12. Duncan, J.M. and Chang, C.Y. (1970), "Nonlinear analysis of stress and strain in soils", J. Soil Mech. Foundation Division, 96(5), 1629-1653. https://doi.org/10.1061/JSFEAQ.0001458.
  13. Han, Y., Wang, Q., Wang, N., Wang, J., Zhang, X., Cheng, S. and Kong, Y. (2018), "Effect of freeze-thaw cycles on shear strength of saline soil", Cold Regions Sci. Technol., 154, 42-53. https://doi.org/10.1016/j.coldregions.2018.06.002.
  14. Hu, T., Liu, J., Wang, T. and Yue, Z. (2019), "Effect of freeze-thaw cycles on the deformation characteristics of a silty clay and its constitutive model with double yielding surfaces", Rock Soil Mech., 40(3), 987-997. https://doi.org/10.16285/j.rsm.2017.1829.
  15. Hu, W., Cheng, W.C., Wen, S. and Rahman, M.M. (2021), "Effects of chemical contamination on microscale structural characteristics of intact loess and resultant macroscale mechanical properties", CATENA, 203. https://doi.org/10.1016/j.catena.2021.105361.
  16. Huang, M., Hu, P. and Zhang, H. (2008), "Two-yield surface constitutive model for fine sand in consideration of dilatancy and strain softening", J. Hydraulic Eng., 39(2), 129-136. http://doi.org/10.3321/j.issn:0559-9350.2008.02.001.
  17. Huang, W., Pu, J. and Chen, Y. (1981), "Hardening rule and yield function for soils", Chinese J. Geotech. Eng., 3, 19-26.
  18. Kong, Y., Xu, M. and Song, E. (2017), "An elastic-viscoplastic double-yield-surface model for coarse-grained soils considering particle breakage", Comput. Geotech., 85, 59-70. http://doi.org/10.1016/j.compgeo.2016.12.014.
  19. Lade, P.V. (1977), "Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces", Int. J. Solids Struct., 13(11), 1019-1035. http://doi.org/10.1016/0020-7683(77)90073-7.
  20. Lai, Y., Jin, L. and Chang, X. (2009), "Yield criterion and elasto-plastic damage constitutive model for frozen sandy soil", Int. J. Plasticity, 25(6), 1177-1205. http://doi.org/10.1016/j.ijplas.2008.06.010.
  21. Lai, Y., Yang, Y., Chang, X. and Li, S. (2010), "Strength criterion and elastoplastic constitutive model of frozen silt in generalized plastic mechanics", Int. J. Plasticity, 26(10), 1461-1484. https://doi.org/10.1016/j.ijplas.2010.01.007.
  22. Lai, Y.M., Xu, X.T., Yu, W.B. and L., Q.J. (2014), "An experimental investigation of the mechanical behavior and a hyperplastic constitutive model of frozen loess", Int. J. Eng. Sci., 84, 29-53. https://doi.org/10.1016/j.ijengsci.2014.06.011.
  23. Li, G. (2006), "Characteristics and development of tsinghua elasto-plastic model for soil", Chinese J. Geotech. Eng., 28(1), 1-10. http://doi.org/10.1016/S1872-1508(06)60035-1.
  24. Li, S., Niu, F., Lai, Y., Pei, W. and Yu, W. (2017), "Optimal design of thermal insulation layer of a tunnel in permafrost regions based on coupled heat-water simulation", Appl. Thermal Eng., 110, 1264-1273. http://doi.org/10.1016/j.applthermaleng.2016.09.033.
  25. Li, X. and Dafalias, Y.F. (2000), "Dilatancy for cohesionless soils", Geotechnique, 50, 449-460. http://doi.org/10.1680/geot.2000.50.4.449.
  26. Liu, J., Chang, D. and Yu, Q. (2016), "Influence of freeze-thaw cycles on mechanical properties of a silty sand", Eng. Geology, 210, 23-32. https://doi.org/10.1016/j.enggeo.2016.05.019.
  27. Liu, J., Lv, P., Cui, Y. and Liu, J. (2014), "Experimental study on direct shear behavior of frozen soil-concrete interface", Cold Regions Sci. Technol., 104-105, 1-6. http://doi.org/10.1016/j.coldregions.2014.04.007.
  28. Liu, M., Liu, H. and Gao, Y. (2012), "New double yield surface model for coarse granular materials incorporating nonlinear unified failure criterion", J. Central South U., 19(11), 3236-3243. https://doi.org/10.1007/s11771-012-1400-z.
  29. Roscoe, K. and Schofield, A. (1963), "Mechanical behaviour of an idealised 'wet-clay'", Proceedings of the European Conference on Soil Mechanics and Foundation Engineering, Wiesbaden, October, 47-54.
  30. Shen, Z. (1980), "The rational form of stress-strain relationship of soils based on elasto-plasticity theory", Chinese J. Geotech. Eng., 2(2), 11-19.
  31. Suebsuk, J., Horpibulsuk, S. and Liu, M.D. (2019), "Compression and shear responses of structured clays during subyielding", Geomech. Eng., 18(2), 121-131. https://doi.org/10.12989/gae.2019.18.2.121.
  32. Sukkarak, R., Pramthawee, P. and Jongpradist, P. (2016), "A modified elasto-plastic model with double yield surfaces and considering particle breakage for the settlement analysis of high rockfill dams", KSCE J. Civil Eng., 21(3), 1-12. http://doi.org/10.1007/s12205-016-0867-9.
  33. Wang, Q., Kong, Y., Zhang, X., Ruan, Y. and Chen, Y. (2016), "Mechanical effect of pre-consolidation pressure of structural behavior soil", J. Southwest Jiaotong U., 51(5), 987-994. http://doi.org/10.3969/j.issn.0258-2724.2016.05.023.
  34. Wang, S., Wang, Q., Qi, J. and Liu, F. (2018), "Experimental study on freezing point of saline soft clay after freeze-thaw cycling", Geomech. Eng., 15(4), 997-1004. http://dx.doi.org/10.12989/gae.2018.15.4.997.
  35. Yang, D., Yan, C., Liu, S., Zhang, J. and Hu, Z. (2019), "Stress-strain constitutive model of concrete corroded by saline soil under uniaxial compression", Construct. Building Mater., 213, 665-674. https://doi.org/10.1016/j.conbuildmat.2019.03.153.
  36. Yao, Y. (2015), "Advanced UH models for soils", Chinese J. Geotech. Eng., 37(2), 193-217. http://doi.org/10.11779/CJGE201502001.
  37. Yao, Y., Zhang, B. and Zhu, J. (2012), "Behaviors,constitutive model sand numerical simulation of soils", China Civil Eng. J., 45(3), 135-158.
  38. Yin, Z. (1988), "A stress-strain model of soil with double yield surfaces", Chinese J. Geotech. Eng. Geology, 10(4), 66-73.
  39. Yin, Z., LU, H. and Zhu, J. (1996), "The elliptic-parabolic yield surfaces model and its softness matrix", J. Hydraulic Eng., 12(12), 23-28.
  40. Yu, F., Qi, J., Zhang, M., Lai, Y., Yao, X., Liu, Y. and Wu, G. (2016), "Cooling performance of two-phase closed thermosyphons installed at a highway embankment in permafrost regions", Appl. Thermal Eng., 98, 220-227. http://doi.org/10.1016/j.applthermaleng.2015.11.102.
  41. Zhang, M., Lai, Y., Li, D., Tong, G. and Li, J. (2012), "Numerical analysis for thermal characteristics of cinderblock interlayer embankments in permafrost regions", Appl. Thermal Eng., 36, 252-259. http://doi.org/10.1016/j.applthermaleng.2011.10.020.
  42. Zhang, X., Ren, K., Sun, H., Xing, Y. and Yang, J. (2018), "Constitutive relationship with double yield surfaces for cinder improved soil under freeze-thaw cycles", Chinese J. Rock Mech. Eng., 37(8), 1916-1923. http://doi.org/10.13722/j.cnki.jrme.2018.0129.
  43. Zhang, X., Wang, Q., Li, P. and Wang, R. (2015), "Research on soil dispersion of qian'an soil forest", J. Northeastern U. (Natural Science), 36(11), 1643-1647. http://doi.org/10.3969/j.issn.1005-3026.2015.11.027.
  44. Zhang, X., Zhai, E., Sun, D.A., Wu, Y. and Lu, Y. (2021), "Theoretical and numerical analyses on hydro-thermal-salt-mechanical interaction of unsaturated salinized soil subjected to typical unidirectional freezing process", Int. J. Geomech., 21(7), https://doi.org/10.1061/(ASCE)GM.1943-5622.0002036.
  45. Zhao, B., Huang, T., Liu, D., Liu, Y., Wang, X., Liu, S. and Yu, G. (2019), "Study on the mechanical properties test and constitutive model of rock salt", Geomech. Eng., 18(3), 291-298. http://dx.doi.org/10.12989/gae.2019.18.3.291.
  46. Zhao, Y., Lai, Y., Pei, W. and Yu, F. (2020), "An anisotropic bounding surface elastoplastic constitutive model for frozen sulfate saline silty clay under cyclic loading", Int. J. Plasticity, 129(4), 102668. https://doi.org/10.1016/j.ijplas.2020.102668.
  47. Zhou, C.Y. and Zhu, F.X. (2010), "An elasto-plastic damage constitutive model with double yield surfaces for saturated soft rock", Int. J. Rock Mech. Mining Sci., 47(3), 385-395. http://doi.org/10.1016/j.ijrmms.2010.01.002.
  48. Zhou, G., Hu, K., Zhao, X., Wang, J. and Lu, G. (2015), "Laboratory investigation on tensile strength characteristics of warm frozen soils", Cold Regions Sci. Technol., 113. http://doi.org/10.1016/j.coldregions.2015.02.003.
  49. Zhu, Z., Kang, G., Ma, Y., Xie, Q., Zhang, D. and Ning, J. (2016), "Temperature damage and constitutive model of frozen soil under dynamic loading", Mech. Mater., 102, 108-116. http://doi.org/10.1016/j.mechmat.2016.08.009.