Journal of Power Electronics

  • 제21권4호
  • /
  • Pages.625-633
  • /
  • 2021
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Highly isolated switching mode power supply for solid-state transformers in railway vehicles

  • Lee, Yejun (Department of Electrical and Electronic Engineering, Konkuk University) ;
  • Bu, Hanyoung (Department of Electrical and Electronic Engineering, Konkuk University) ;
  • Lee, Dohong (Department of Electrical and Electronic Engineering, Konkuk University) ;
  • Cho, Younghoon (Department of Electrical and Electronic Engineering, Konkuk University)
  • 투고 : 2020.10.26
  • 심사 : 2020.12.26
  • 발행 : 2021.04.20
⟨ 이전 논문 다음 논문 ⟩

초록

This paper discusses an isolated switching mode power supply (SMPS) with an AC 30 kVrms insulation capability for application to the solid-state transformers (SSTs) in railway vehicles. The insulation capability of the SMPS should be higher than AC 25 kVrms for application at the SSTs in railway vehicles. The proposed highly isolated SMPS is superior to commercial isolated power supplies with low insulation capability, which is normally less than 20 kV. The input side of the proposed isolated SMPS is physically separated from its output side by a specially designed miniature high-frequency (HF) transformer to obtain high insulation capability. The core of the miniature HF transformer is separated by insulation material. The primary and secondary coils are wound around each separated core. A CLLC resonant converter that consists of a primary resonant capacitor (C), two inductors (LL), and a secondary resonant capacitor (C) is applied as the proposed isolated SMPS topology to improve the output voltage regulation performance, which varies due to a large leakage inductance derived from the airgap of the proposed miniature HF transformer. Experiments are carried out to verify the CLLC resonant converter of the proposed isolated SMPS. Electrostatic finite element method (FEM) simulations and high potential (HiPot) tests are carried out to verify the AC 30 kVrms insulation capability of the proposed isolated SMPS. The electrostatic FEM simulations demonstrate the DC 42.43 kV insulation capability, and the HiPot tests verify the insulation capability from AC 5 kVrms to AC 30 kVrms.

키워드

과제정보

This work was supported by a Grant (20RTRP-B146050-03) from the Railroad Technology Development Program funded by Ministry of Land, Infrastructure and Transport (MOLIT) of Korean Government. This work was supported by the Human Resources Program in Energy Technology of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20204010600220).

참고문헌

  1. Zhan, W., Hui, L.: An integrated three-port bidirectional DC-DC Converter for PV application on a DC distribution system. IEEE Trans. Power Electron. 28(2), 4612-4624 (2013) https://doi.org/10.1109/TPEL.2012.2236580
  2. Biao, Z., Qjang, S., Jianguo, L., Yu, W., Wenhua, L.: Modular multilevel high-frequency-link DC transformer based on dual active phase-shift principle for medium-voltage DC power distribution application. IEEE Trans. Power Electron. 32(3), 1779-1791 (2017) https://doi.org/10.1109/TPEL.2016.2558660
  3. Raimundo, N.M.D.O., Luan, C.D.S.M., Herminio, M.D.O.F., Demercil, D.S.O.: A Three-port isolated three-phase current-fed DC-DC converter feasible to PV and storage energy system connection on a DC distribution grid. IEEE Trans. Ind. Appl. 55(5), 4910-4919 (2019) https://doi.org/10.1109/tia.2019.2921519
  4. Gangyao, W., Seunghun, B., Joseph, E., Arun, K., Fei, W., Xu, S., Sumit, D., Yang, L., Tiefu, Z., Wenxi, Y., Richard, G., Subhashish, B., Alex, Q. H.: Design and hardware implementation of Gen-1 silicon based solid state transformer. In: Proceedings of the IEEE Applied Power Electronics Conference and Exposition, pp 1344-1349 (2011)
  5. Stefano, F., Mario, M., Luis, V.: Advances in locomotive power electronic systems directly fed through AC lines. In: Proceedings of the 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), pp 657-664 (2016)
  6. Deepak, R., Sheldon, S. W.: Topological overview on solid-state transformer traction Technology in high-speed trains. In: Proceedings of the IEEE Transportation Electrification Conference and Expo, pp 32-37 (2018)
  7. Anup, A., Sayan, A., Yos, P., Ghanshyamsinh, G., Subhashish, B.: Design considerations and development of an innovative gate driver for medium-voltage power devices with high dv/dt. IEEE Trans. Power Electron. 34(6), 5256-5267 (2019) https://doi.org/10.1109/tpel.2018.2870084
  8. Ole, C.S., Pierre, L., Sanghyeon, P., Juan, M.R.D., Dimosthenis, P., Ole, M.M., Tore, U.: Optimized design of multi-MHz frequency isolated auxiliary power supply for gate drivers in medium-voltage converters. IEEE Trans Power Electron. 35(9), 9496-9511 (2020) https://doi.org/10.1109/tpel.2020.2972977
  9. Arun, K., Subhashish, B.: Design considerations and development of gate driver for 15 kV SiC IGBT. In: Proceedings of the IEEE Applied Power Electronics Conference and Exposition, pp 1494-1501 (2014)
  10. Sanket, P., Rajkumar, K., Subhashish, B.: Design of modular auxiliary gate driver power supply for medium voltage converter system. In: Proceedings of the IEEE Energy Conversion Congress and Exposition, pp 5712-5719 (2019)
  11. Jeongwoo, K., Hosung, K., Younghoon, C., Juyong K.: Highly isolated power supply design for gate drivers of the solid state transformer. In: Proceedings of the Asian Conference on Energy, Power and Transportation Electrification, pp 1-5 (2017)
  12. Krishna, M., Sachin, M., Awneesh, T., Kasunaidu, V., Ankan, D., Subhashish, B.: Design and evaluation of isolated gate driver power supply for medium voltage converter applications. In: Proceedings of the IEEE Applied Power Electronics Conference and Exposition, pp 1632-1639 (2016)
  13. Reto, S., Peter, K.S., Florian, K., Johann., W. K.: Contactless energy transmission for an isolated 100W gate driver supply of a medium voltage converter. In: Proceedings of the 35th Annual Conference of IEEE Industrial Electronics, pp 302-307 (2009)
  14. Christoph, M., Jurgen, B., Johann, W. K., Reto, S., Peter, K. S.: DC-DC converter for gate power supplies with an optimal air transformer. In: Proceedings of the Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition, pp 1865-1870 (2010)
  15. Van, T. N., G., V. B., Ghanshyamsinh, G.: Design of isolated gate driver power supply in medium voltage converters using high frequency and compact wireless power transfer. In: Proceedings of the IEEE Energy Conversion Congress and Exposition, pp 135-142 (2019)
  16. Koga, Y., Mishima, T.: Analysis and verification on CLLC resonant bidirectional DC-DC converter based on variable frequency phase difference control principle. In: Proceedings of the IEEE 18th International Power Electronics and Motion Control Conference, pp 58-65 (2018)
  17. Xiaoying, L., Haoyu, W.: Three-port bidirectional CLLC resonant converter based onboard charger for PEV hybrid energy management system. In: Proceedings of the IEEE Energy Conversion Congress and Exposition, pp 1432-1438 (2017)
  18. Jee-Hoon, J., Ho-Sung, K., Myung-Hyo, R., Ju-Won, B.: Design methodology of bidirectional CLLC resonant converter for high-frequency isolation of DC distribution systems. IEEE Trans. Power Electron. 28(4), 1741-1755 (2013) https://doi.org/10.1109/TPEL.2012.2213346