참고문헌
- D.F. Chen, et al., Development of neutron scattering on 60 MW research reactor in CIAE, Phys. B Condens. Matter 385 (2006) 966-967.
- Daxin Gong, et al., "Heat transfer calculation on plate-type fuel assembly of high flux research reactor.", Science and Technology of Nuclear Installations 2015 (2015).
- K. Boning, W. Petry, Test irradiations of full-sized U3Si2-Al fuel plates up to very high fission densities, J. Nucl. Mater. (2009) 254-263, 383.3. https://doi.org/10.1016/j.jnucmat.2008.09.016
- Daniel Iracane, Pascal Chaix, Ana Alamo, Jules Horowitz Reactor: a high-performance material testing reactor, Comptes Rendus Physique 9.3-4 (2008) 445-456. https://doi.org/10.1016/j.crhy.2007.11.003
- Armando Travelli, Effect of Reduced Enrichment on the Fuel Cycle for Research Reactors, Argonne National Lab, IL (USA), 1982. No. CONF-820420-12.
- J.L. Snelgrove, RERTR Program Fuel Development and Testing-The Past Year and the Next, 1988. No. ANL/RERTR/TM-9.
- D.D. Keiser, et al., "High-density, low-enriched uranium fuel for nuclear research reactors.", JOM (J. Occup. Med.) 55 (9) (2003) 55-58. https://doi.org/10.1007/s11837-003-0031-0
- Kim, Yeon Soo, et al., Temperature and dose dependence of fission-gas-bubble swelling in U3Si2, J. Nucl. Mater. (2009) 443-449, 389.3. https://doi.org/10.1016/j.jnucmat.2009.02.037
- Nuclear Regulatory Commission, Safety Evaluation Report Related to The Evaluation Of Low-Enriched Uranium Silicide-Aluminum Dispersion Fuel For Use In Non-Power Reactors, Nuclear Regulatory Commission, 1988. No. NUREG-1313.
- Ann Leenaers, et al., Post-irradiation examination of AlFeNi cladded U3Si2 fuel plates irradiated under severe conditions, J. Nucl. Mater. (2008) 243-251, 375.2. https://doi.org/10.1016/j.jnucmat.2008.01.013
- Jian Gan, et al., Microstructure of the irradiated U3Si2/Al silicide dispersion fuel, J. Nucl. Mater. (2011) 97-104, 419.1-3. https://doi.org/10.1016/j.jnucmat.2011.07.030
- R.C. Birtcher, J.W. Richardson, M.H. Mueller, Amorphization of U3Si2 by ion or neutron irradiation, J. Nucl. Mater. (1996) 158-163, 230.2. https://doi.org/10.1016/0022-3115(96)00160-2
- J. Rest, A model for fission-gas-bubble behavior in amorphous uranium silicide compounds, J. Nucl. Mater. (2004) 107-117, 325.2-3. https://doi.org/10.1016/j.jnucmat.2003.11.008
- Yeon Soo Kim, Gerard L. Hofman, Interdiffusion in U3Si-Al, U3Si2-Al, and USi-Al dispersion fuels during irradiation, J. Nucl. Mater. (2011) 1-9, 410.1-3. https://doi.org/10.1016/j.jnucmat.2010.12.031
- Y.S. Kim, et al., MODELING OF INTERACTION LAYER GROWTH BETWEEN U-Mo PARTICLES AND AN Al MATRIX, Nuclear Engineering and Technology 45 (2013) 827-838. https://doi.org/10.5516/NET.07.2013.713
- J. Rest, The DART Dispersion Analysis Research Tool: A Mechanistic Model for Predicting Fission-Product-Induced Swelling of Aluminum Dispersion Fuels. Users Guide for Mainframe, Workstation, and Personal Computer Applications, Argonne National Lab, IL (United States), 1995. No. ANL-95/36.
- Kim, Yeon Soo, et al., "Fission induced swelling of U-Mo/Al dispersion fuel.", J. Nucl. Mater. 465 (2015) 142-152. https://doi.org/10.1016/j.jnucmat.2015.06.006
- Kathryn E. Metzger, Analysis of Pellet Cladding Interaction and Creep of U3Si2 Fuel for Use in Light Water Reactors, Diss, University of South Carolina, 2016.
- Abaqus, User's Manual, 2013 (Dassault Systems, Pawtucket), version 6.13.
- X. Gong, et al., A new method to simulate the micro-thermo-mechanical behaviors evolution in dispersion nuclear fuel elements, Mech. Mater. 77 (2014) 14-27. https://doi.org/10.1016/j.mechmat.2014.06.004
- Fionn Dunne, Introduction to Computational Plasticity, Oxford University Press, 2005.
- Yukio Sudo, et al., Experimental study of differences in single-phase forced-convection heat transfer characteristics between upflow and downflow for narrow rectangular channel, J. Nucl. Sci. Technol. (1985) 202-212, 22.3. https://doi.org/10.1080/18811248.1985.9735648
- W.Y. Hsu, T. Berzins, Percolation and effective-medium theories for per-fluorinated ionomers and polymer composites, J. Polym. Sci. Polym. Phys. Ed (1985) 933-953, 23.5. https://doi.org/10.1002/pol.1985.180230508
- B. Badrinarayan, J.W. Barlow, Prediction of the thermal conductivity of beds which contain polymer coated metal particles, in: 1990 International Solid Freeform Fabrication Symposium, 1990.
- E.J. Garboczi, J.G. Berryman, Elastic moduli of a material containing composite inclusions: effective medium theory and finite element computations, Mech. Mater. 33 (8) (2001) 455-470. https://doi.org/10.1016/S0167-6636(01)00067-9
- R.M. Christensen, K.H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models - ScienceDirect, J. Mech. Phys. Solid. 27 (4) (1979) 315-330. https://doi.org/10.1016/0022-5096(79)90032-2
- Z. Hashin, S. Shtrikman, A variational approach to the theory of the elastic behaviour of multiphase materials, J. Mech. Phys. Solid. 11 (2) (1963) 127-140. https://doi.org/10.1016/0022-5096(63)90060-7
- H. Shimizu, The properties and irradiation behavior of U3Si2, Br. J. Haematol. (1965) 556-573, 120.4. https://doi.org/10.1046/j.1365-2141.2003.04049.x
- M.R. Finlay, G.L. Hofman, J.L. Snelgrove, Irradiation behaviour of uranium silicide compounds, J. Nucl. Mater. (2004) 118-128, 325.2-3. https://doi.org/10.1016/j.jnucmat.2003.11.009
- G.Y. Jeong, Y.S. Kim, D.S. Sohn, Mechanical analysis of UMo/Al dispersion fuel, J. Nucl. Mater. 466 (2015) 509-521. https://doi.org/10.1016/j.jnucmat.2015.07.033
- Zhi-Gang, et al., First-principles study of structural, elastic, electronic, vibrational and thermodynamic properties of uranium aluminides, Comput. Mater. Sci. 158 (2019) 26-31. https://doi.org/10.1016/j.commatsci.2018.11.008
- S. Nazare, G. Ondracek, F. Thummler, "Investigations on UAlx-Al dispersion fuels for high-flux reactors, J. Nucl. Mater. (1975) 251-259, 56.3. https://doi.org/10.1016/0022-3115(75)90040-9
- Ozaltun Hakan, M.-H. Herman Shen, Pavel Medvedev, Assessment of residual stresses on U10Mo alloy based monolithic mini-plates during Hot Isostatic Pressing, J. Nucl. Mater. (2011) 76-84, 419.1-3. https://doi.org/10.1016/j.jnucmat.2011.08.029
- Kim, Yeon Soo, et al., Fission induced swelling and creep of U-Mo alloy fuel, J. Nucl. Mater. (2013) 37-46, 437.1-3. https://doi.org/10.1016/j.jnucmat.2013.01.346
- F. Cardarelli, Materials Handbook A Concise Desktop Reference, second ed., ,Springer, New York, London, 2005. ISBN 978-1-84628-668-1.
- Gwan Yoon Jeong, et al., Mechanical analysis of UMo/Al dispersion fuel, Journal of Nuclear Materials Aspects of Fission & Fusion (2015).