DOI QR코드

DOI QR Code

The seismic responses of girder bridges with novel sliding lead rubber bearings

  • Wu, Yi-feng (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Li, Ai-qun (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Wang, Hao (School of Civil Engineering, Southeast University)
  • Received : 2020.06.20
  • Accepted : 2021.09.03
  • Published : 2021.09.25

Abstract

Based on the commonly used lead rubber bearing (LRB) and sliding rubber bearing (SRB), a novel sliding lead rubber bearing (SLRB) is introduced. The mechanical properties of the three types of bearings were investigated by experiment. After that, a simply supported girder bridge with a 1/4 scale ratio was designed and fabricated, and the dynamic characteristics and seismic response of the bridge equipped with the above three types of bearings were studied. Results show that the girder's acceleration response has been effectively reduced by setting bearings only for relatively high earthquake intensity. Compared with LRB and SRB, SLRB works with more compositive seismic isolation effect. The "slide" action of the telflon-stainless-steel interface in SLRB can significantly reduce the acceleration response of girder, while the relative displacement between the pier and girder for this novel bearing is not increased due to the occurrence of collision in the bearing.

Keywords

Acknowledgement

The authors would like to acknowledge the support from the Beijing Natural Science Foundation (8194057), the National Natural Science Foundation of China (Grant No. 51578151), Beijing Advanced Innovation Center for Future Urban Design (No. UDC2016030200) and the National Natural Science Foundation of China for Excellent Young Scholars (Grant No. 51722804).

References

  1. Chaudhary, M.T.A., Abe, M. and Fujino, Y. (2001), "Performance evaluation of base-isolated Yama-age bridge with high damping rubber bearings using recorded seismic data", Eng. Struct., 23(2), 902-910. https://doi.org/10.1016/S0141-0296(00)00117-6
  2. Dicleli, M. (2007), "Supplemental elastic stiffness to reduce isolator displacements for seismic-isolated bridges in near-fault zones", Eng. Struct., 29(5), 763-775. https://doi.org/10.1016/j.engstruct.2006.06.013
  3. Dicleli, M. and Buddaram, S. (2006), "Effect of isolator and ground motion characteristics on the performance of seismic-isolated bridges", Earthq. Eng. Struct. D, 35(2), 233-250. https://doi.org/10.1002/eqe.522
  4. Eroz, M. and DesRoches, R. (2013), "A comparative assessment of sliding and elastomeric seismic isolation in a typical multi-span bridge", J. Earthq. Eng., 17(5), 637-657. https://doi.org/10.1080/13632469.2013.771589
  5. Filipov, E.T., Fahnestock, L.A., Steelman, J.S., Hajjar, J.F., LaFave, J.M. and Foutch, D.A. (2013), "Evaluation of quasi-isolated seismic bridge behavior using nonlinear bearing models", Eng. Struct., 49(2), 168-181. https://doi.org/10.1016/j.engstruct.2012.10.011
  6. Hancock, J., Watson-Lamprey, J., Abrahamson, N.A., Bommer, J.J., Markatis, A., Mccoy, E. and Mendis, R. (2006), "An improved method of matching response spectra of recorded earthquake ground motion using wavelets", J. Earthq. Eng., 10(1), 67-89.
  7. Jangid, R.S. (2004), "Seismic response of isolated bridges", J. Bridge Eng., 9(2), 156-166. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:2(156)
  8. Kunde, M.C. and Jangid, R.S. (2006), "Effects of pier and deck flexibility on the seismic response of isolated bridges", J. Bridge Eng., 11(1), 109-121. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:1(109)
  9. Li, H., Mao, C.X. and Ou, J.P. (2008), "Experimental and theoretical study on two types of shape memory alloy devices", Earthq. Eng. Struct. D, 37(3), 407-426. https://doi.org/10.1002/eqe.761
  10. Ohsaki, M., Miyamura, T., Kohiyama, M., Hori, M., Noguchi, H., Akiba, H., Kajiwara, K. and Ine, T. (2009), "High-precision finite element analysis of elastoplastic dynamic responses of super-high-rise steel frames", Earthq. Eng. Struct. D, 38(5), 635-654. https://doi.org/10.1002/eqe.900
  11. Ohsaki, M., Miyamura, T., Kohiyama, M., Yamashita, T., Yamamoto, M. and Nakamura, N. (2015), "Finite-element analysis of laminated rubber bearing of building frame under seismic excitation", Earthq. Eng. Struct. D, 44(11), 1881-1898. https://doi.org/10.1002/eqe.2570
  12. Ponzo, F.C., Cesare, A.D., Leccese, G. and Nigro, D. (2017), "Shake table testing on restoring capability of double concave friction pendulum seismic isolation systems", Earthq. Eng. Struct. D, 46(14), 2337-2353. https://doi.org/10.1002/eqe.2907
  13. Sahasrabudhe, S.S. and Nagarajaiah, S. (2010), "Semi-active control of sliding isolated bridges using MR dampers: an experimental and numerical study", Earthq. Eng. Struct. D, 34(8), 965-983. https://doi.org/10.1002/eqe.464
  14. Shen, J., Tsai, M.H., Chang, K.C. and Lee, G.C. (2004), "Performance of a seismically isolated bridge under near-fault earthquake ground motions", J. Struct. Eng., 130(6), 861-868. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(861)
  15. Steelman, J.S., Fahnestock, L.A., Filipov, E.T. and LaFave, J.M. (2013), "Shear and friction response of nonseismic laminated elastomeric bridge bearings subject to seismic demands", J. Bridge Eng., 18(7), 612-623. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000406
  16. Tsai, M.H., Wu, S.Y., Chang, K.C. and Lee, G.C. (2007), "Shaking table tests of a scaled bridge model with rolling-type seismic isolation bearings", Eng. Struct., 29(5), 694-702. https://doi.org/10.1016/j.engstruct.2006.05.025
  17. Tsopelas, P., Constantinou, M.C., Okamoto, S., Fujii, S. and Ozaki, D. (1996), "Experimental study of bridge seismic sliding isolation systems", Eng. Struct., 18(4), 301-310. https://doi.org/10.1016/0141-0296(95)00147-6
  18. Wu, Y.F., Wang, H., Li, A.Q., Feng, D.M., Sha, B. and Zhang, Y.P. (2017), "Explicit finite element analysis and experimental verification of a sliding lead rubber bearing", J. Zhejiang Uni. SCI. A, 18(5). 363-376. https://doi.org/10.1631/jzus.A1600302
  19. Wu, Y.F., Wang, H., Sha, B., Zhang, R.J. and Li, A.Q. (2018), "The compression-shear properties of small-size seismic isolation rubber bearings for bridges", Struct. Monitor. Maint., Int. J., 5(1) 39-50. https://doi.org/10.12989/smm.2018.5.1.039
  20. Xiang, N. and Li, J. (2017), "Experimental and numerical study on seismic sliding mechanism of laminated-rubber bearings", Eng. Struct., 141(8), 159-174. https://doi.org/10.1016/j.engstruct.2017.03.032
  21. Xing, C.X., Wang, H., Li, A.Q. and Wu, J.R. (2012), "Design and experimental verification of a new multi-functional bridge seismic isolation bearing", J. Zhejiang Uni. SCI. A, 13(12), 904-914. https://doi.org/10.1631/jzus.A1200106
  22. Zheng, W.Z., Wang, H., Li, J. and Shen, H.J. (2021), "Parametric study of SMA-based friction pendulum system for response control of bridges under near-fault ground motions", J. Earthq. Eng., 25(8), 1494-1512. https://doi.org/10.1080/13632469.2019.1582442
  23. Zhou, T., Wu, Y.F. and Li, A.Q. (2018), "Numerical study on the ultimate behavior of elastomeric bearings under combined compression and shear", KSCE J. Civil Eng., 22(9), 3556-3566. https://doi.org/10.1007/s12205-018-0949-y